From patchwork Fri Dec 23 23:31:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wesley Cheng X-Patchwork-Id: 13081516 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 577AAC3DA7A for ; Sun, 25 Dec 2022 18:51:32 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 1CA8E4B40; Sun, 25 Dec 2022 19:50:38 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 1CA8E4B40 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1671994288; bh=A6GkOMyt59yburjfPFN09HuLa3T3x8WstlwRIi0qMH8=; h=From:To:Subject:Date:List-Id:List-Unsubscribe:List-Archive: List-Post:List-Help:List-Subscribe:Cc:From; b=OBpuD1l2NrDSMzvE7Zt4ROFpX9qlsXziFMJnVWSla6lL5R8Mf4PkbqsrCkJUjmRA5 Oo7jCLxnRkrAvOjPYe5AuEGNydggU6D7dj2LR3IEvOerncvMbTCqSva6HcRW1gK2VK 4KEVcxXGbhwXw+nHOGL2gBAdsDZa34Kn663H8Ej0= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 1DE36F80534; Sun, 25 Dec 2022 19:49:48 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id C97C0F8047B; Sat, 24 Dec 2022 00:32:56 +0100 (CET) Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 39889F8047B for ; Sat, 24 Dec 2022 00:32:46 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 39889F8047B Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcppdkim1 header.b=NOv863ML Received: from pps.filterd (m0279873.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 2BNNW42H011577; Fri, 23 Dec 2022 23:32:45 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=qcppdkim1; bh=fxj+9QS8+FgVES+CkOHzD/eZuPkfiygDQZRXSYewnCA=; b=NOv863MLKCgh+9THC7nFiTV1JBFAJuslFzyJfz/drL122SeN6tZx4OPVzLvviNWPLWhM +HCr/Xj2AoN7Rpd9ehzUgSBiIOj26mGGffyUr5f2435iB912Kq2kFpuoWyFFrqjQEZD6 OclrF6YTNW+vOp8MPvlQ/rSnvwCKch1VthRS0vKKBXxcURSKVF5dy4C91bKH4nB/LC6W kJdqV8XZkNcPAoX1jOC6AstZgtcpBX+4ITF+O88KkDS23RLLzB5X8hgBhqa74IKbbuFZ zMuDrTl3P2HdLw2rxaoO/tblz48w2lkT8Es9Lbj5/qTbO2CWuIJCZ88u9Bn1ZjcN4b0x XQ== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3mn2pga502-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 23 Dec 2022 23:32:44 +0000 Received: from nalasex01b.na.qualcomm.com (nalasex01b.na.qualcomm.com [10.47.209.197]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 2BNNWhi0000810 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 23 Dec 2022 23:32:43 GMT Received: from hu-wcheng-lv.qualcomm.com (10.49.16.6) by nalasex01b.na.qualcomm.com (10.47.209.197) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.36; Fri, 23 Dec 2022 15:32:42 -0800 From: Wesley Cheng To: , , , , , , , , , , , , Subject: [RFC PATCH 00/14] Introduce QC USB SND audio offloading support Date: Fri, 23 Dec 2022 15:31:46 -0800 Message-ID: <20221223233200.26089-1-quic_wcheng@quicinc.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 X-Originating-IP: [10.49.16.6] X-ClientProxiedBy: nalasex01a.na.qualcomm.com (10.47.209.196) To nalasex01b.na.qualcomm.com (10.47.209.197) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: YpZvkf7XIB1RcrCiLxeUXy3CoWpNkExn X-Proofpoint-GUID: YpZvkf7XIB1RcrCiLxeUXy3CoWpNkExn X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.923,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-12-23_08,2022-12-23_01,2022-06-22_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 priorityscore=1501 bulkscore=0 adultscore=0 impostorscore=0 mlxlogscore=926 lowpriorityscore=0 suspectscore=0 mlxscore=0 phishscore=0 clxscore=1011 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2212070000 definitions=main-2212230197 X-Mailman-Approved-At: Sun, 25 Dec 2022 19:49:45 +0100 X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Wesley Cheng , quic_jackp@quicinc.com, quic_plai@quicinc.com Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Wesley Cheng (14): ASoC: Add SOC USB APIs for adding an USB backend ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qcom: Add USB backend ASoC driver for Q6 sound: usb: card: Introduce USB SND vendor op callbacks sound: usb: Export USB SND APIs for modules usb: core: hcd: Introduce USB HCD APIs for interrupter management usb: host: xhci: Add XHCI secondary interrupter support usb: dwc3: Add DT parameter to specify maximum number of interrupters sound: usb: Introduce QC USB SND offloading support sound: usb: card: Check for support for requested audio format sound: soc: soc-usb: Add PCM format check API for USB backend sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device ASoC: dt-bindings: Add Q6USB backend bindings ASoC: dt-bindings: Update example for enabling USB offload on SM8250 .../bindings/sound/qcom,q6usb-dais.yaml | 55 + .../bindings/sound/qcom,sm8250.yaml | 13 + drivers/usb/core/hcd.c | 86 + drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/host/xhci-mem.c | 219 ++- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci.c | 169 +- drivers/usb/host/xhci.h | 15 + .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb.h | 7 + include/linux/usb/hcd.h | 16 +- include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 34 + sound/soc/Makefile | 2 +- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 47 + sound/soc/qcom/qdsp6/q6afe.c | 183 ++ sound/soc/qcom/qdsp6/q6afe.h | 46 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 8 + sound/soc/qcom/qdsp6/q6usb.c | 239 +++ sound/soc/soc-usb.c | 79 + sound/usb/Kconfig | 14 + sound/usb/Makefile | 2 +- sound/usb/card.c | 43 + sound/usb/card.h | 10 + sound/usb/endpoint.c | 2 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 9 +- sound/usb/pcm.h | 12 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1610 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 +++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 38 files changed, 3998 insertions(+), 50 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h