mbox series

[0/3] arm64: dts: rockchip: Add SPDIF on RK3588

Message ID 20250120-rk3588-spdif-v1-0-1415f5871dc7@gmail.com (mailing list archive)
Headers show
Series arm64: dts: rockchip: Add SPDIF on RK3588 | expand

Message

Alexey Charkov Jan. 20, 2025, 9:01 a.m. UTC 
RK3588(s) uses a several SPDIF transmitters which are software
compatible with those found in RK3568. This series adds the required
device tree nodes in SoC .dtsi and enables the dedicated optical
SPDIF output on the H96 Max V58.

Note that only SPDIF 0/1 are meant as externally connected outputs,
while SPDIF 2/3/4/5 are internally routed to the various display
encoders inside the SoC. Thus, using SPDIF 0/1 only requires their
device tree nodes to be enabled (provided that the signal is routed
somewhere usable on the board itself), while the rest rely on driver
support on the display connector side and are therefore not touched
here.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
---
Alexey Charkov (3):
      dt-bindings: ASoC: rockchip: Add compatible for RK3588 SPDIF
      arm64: dts: rockchip: Add SPDIF nodes to RK3588(s) device trees
      arm64: dts: rockchip: Enable SPDIF output on H96 Max V58

 .../devicetree/bindings/sound/rockchip-spdif.yaml  |  4 ++
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi      | 64 ++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi     | 30 ++++++++++
 .../arm64/boot/dts/rockchip/rk3588-h96-max-v58.dts | 24 ++++++++
 4 files changed, 122 insertions(+)
---
base-commit: 4ec376748558ba132a2a49513acd3b08774384e3
change-id: 20250109-rk3588-spdif-e49aa49145d3

Best regards,