diff mbox

[v3,2/2] ASoC: cs43130: Add devicetree bindings for CS43130

Message ID 12f0babd-017e-4aef-b04c-07e783a84c64@EX4.ad.cirrus.com (mailing list archive)
State New, archived
Headers show

Commit Message

Li Xu Dec. 13, 2016, 5:47 p.m. UTC 
Add devicetree bindings documentation file for Cirrus
Logic CS43130 codec.

Signed-off-by: Li Xu <li.xu@cirrus.com>
---
 .../devicetree/bindings/sound/cs43130.txt          | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/cs43130.txt

Comments

Rob Herring (Arm) Dec. 19, 2016, 6:13 p.m. UTC | #1 
On Tue, Dec 13, 2016 at 11:47:07AM -0600, Li Xu wrote:
> Add devicetree bindings documentation file for Cirrus
> Logic CS43130 codec.
> 
> Signed-off-by: Li Xu <li.xu@cirrus.com>
> ---
>  .../devicetree/bindings/sound/cs43130.txt          | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/cs43130.txt

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/cs43130.txt b/Documentation/devicetree/bindings/sound/cs43130.txt
new file mode 100644
index 0000000..1af6b78
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs43130.txt
@@ -0,0 +1,41 @@ 
+CS43130 DAC
+
+Required properties:
+
+  - compatible : "cirrus,cs43130"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply:
+	power supplies for the device, as covered in
+	Documentation/devicetree/bindings/regulator/regulator.txt.
+
+
+Optional properties:
+
+  - reset-gpios : Active low GPIO used to reset the device
+
+  - cirrus,xtal-ibias:
+   When external MCLK is generated by external crystal
+   oscillator, CS43130 can be used to provide bias current
+   for external crystal.  Amount of bias current sent is
+   set as:
+   1 = 7.5uA
+   2 = 12.5uA
+   3 = 15uA
+
+Example:
+
+cs43130: audio-codec@30 {
+   compatible = "cirrus,cs43130";
+   reg = <0x30>;
+   reset-gpios = <&axi_gpio 54 1>;
+   VA-supply = <&dummy_vreg>;
+   VP-supply = <&dummy_vreg>;
+   VL-supply = <&dummy_vreg>;
+   VCP-supply = <&dummy_vreg>;
+   VD-supply = <&dummy_vreg>;
+   cirrus,xtal-ibias = <2>;
+   interrupt-parent = <&gpio0>;
+   interrupts = <55 8>;
+};