[2/8] ASoC: pxa: e740_wm9705: Convert to table based DAPM setup

Commit Message

Lars-Peter Clausen March 1, 2014, 2:48 p.m. UTC

Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit cleaner and on the other hand the board level DAPM elements
get registered in the card's DAPM context rather than in the CODEC's DAPM
context.

Signed-off-by: Lars-Peter Clausen <[e-mail]>
---
 sound/soc/pxa/e740_wm9705.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Mark Brown March 3, 2014, 2:04 a.m. UTC | #1

On Sat, Mar 01, 2014 at 03:48:14PM +0100, Lars-Peter Clausen wrote:
> Use table based setup to register the DAPM widgets and routes. This on one hand
> makes the code a bit cleaner and on the other hand the board level DAPM elements
> get registered in the card's DAPM context rather than in the CODEC's DAPM
> context.

Applied, thanks.

Patch

diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
index 44b5c09..c29feda 100644
--- a/sound/soc/pxa/e740_wm9705.c
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -103,11 +103,6 @@  static int e740_ac97_init(struct snd_soc_pcm_runtime *rtd)
 	snd_soc_dapm_nc_pin(dapm, "PCBEEP");
 	snd_soc_dapm_nc_pin(dapm, "MIC2");
 
-	snd_soc_dapm_new_controls(dapm, e740_dapm_widgets,
-					ARRAY_SIZE(e740_dapm_widgets));
-
-	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
 	return 0;
 }
 
@@ -136,6 +131,11 @@  static struct snd_soc_card e740 = {
 	.owner = THIS_MODULE,
 	.dai_link = e740_dai,
 	.num_links = ARRAY_SIZE(e740_dai),
+
+	.dapm_widgets = e740_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(e740_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
 };
 
 static struct gpio e740_audio_gpios[] = {