@@ -224,6 +224,30 @@ MODULE_DEVICE_TABLE(pci, snd_fm801_ids);
* common I/O routines
*/
+static inline bool __is_ready(struct fm801 *chip, unsigned int iterations)
+{
+ unsigned int idx;
+
+ for (idx = 0; idx < iterations; idx++) {
+ if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_BUSY))
+ return true;
+ udelay(10);
+ }
+ return false;
+}
+
+static inline bool __is_valid(struct fm801 *chip, unsigned int iterations)
+{
+ unsigned int idx;
+
+ for (idx = 0; idx < iterations; idx++) {
+ if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_VALID))
+ return true;
+ udelay(10);
+ }
+ return false;
+}
+
static int snd_fm801_update_bits(struct fm801 *chip, unsigned short reg,
unsigned short mask, unsigned short value)
{
@@ -246,32 +270,19 @@ static void snd_fm801_codec_write(struct snd_ac97 *ac97,
unsigned short val)
{
struct fm801 *chip = ac97->private_data;
- int idx;
- /*
- * Wait until the codec interface is not ready..
- */
- for (idx = 0; idx < 100; idx++) {
- if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_BUSY))
- goto ok1;
- udelay(10);
+ if (!__is_ready(chip, 100)) {
+ dev_err(chip->card->dev, "AC'97 interface is busy (1)\n");
+ return;
}
- dev_err(chip->card->dev, "AC'97 interface is busy (1)\n");
- return;
- ok1:
/* write data and address */
fm801_writew(val, chip, AC97_DATA);
fm801_writew(reg | (ac97->addr << FM801_AC97_ADDR_SHIFT), chip, AC97_CMD);
- /*
- * Wait until the write command is not completed..
- */
- for (idx = 0; idx < 1000; idx++) {
- if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_BUSY))
- return;
- udelay(10);
- }
- dev_err(chip->card->dev, "AC'97 interface #%d is busy (2)\n", ac97->num);
+
+ if (!__is_ready(chip, 1000))
+ dev_err(chip->card->dev, "AC'97 interface #%d is busy (2)\n",
+ ac97->num);
}
static unsigned short snd_fm801_codec_read(struct snd_ac97 *ac97, unsigned short reg)
@@ -279,39 +290,26 @@ static unsigned short snd_fm801_codec_read(struct snd_ac97 *ac97, unsigned short
struct fm801 *chip = ac97->private_data;
int idx;
- /*
- * Wait until the codec interface is not ready..
- */
- for (idx = 0; idx < 100; idx++) {
- if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_BUSY))
- goto ok1;
- udelay(10);
+ if (!__is_ready(chip, 100)) {
+ dev_err(chip->card->dev, "AC'97 interface is busy (1)\n");
+ return 0;
}
- dev_err(chip->card->dev, "AC'97 interface is busy (1)\n");
- return 0;
- ok1:
/* read command */
fm801_writew(reg | (ac97->addr << FM801_AC97_ADDR_SHIFT) |
FM801_AC97_READ, chip, AC97_CMD);
- for (idx = 0; idx < 100; idx++) {
- if (!(fm801_readw(chip, AC97_CMD) & FM801_AC97_BUSY))
- goto ok2;
- udelay(10);
+ if (!__is_ready(chip, 100)) {
+ dev_err(chip->card->dev, "AC'97 interface #%d is busy (2)\n",
+ ac97->num);
+ return 0;
}
- dev_err(chip->card->dev, "AC'97 interface #%d is busy (2)\n", ac97->num);
- return 0;
- ok2:
- for (idx = 0; idx < 1000; idx++) {
- if (fm801_readw(chip, AC97_CMD) & FM801_AC97_VALID)
- goto ok3;
- udelay(10);
+ if (!__is_valid(chip, 1000)) {
+ dev_err(chip->card->dev,
+ "AC'97 interface #%d is not valid (2)\n", ac97->num);
+ return 0;
}
- dev_err(chip->card->dev, "AC'97 interface #%d is not valid (2)\n", ac97->num);
- return 0;
- ok3:
return fm801_readw(chip, AC97_DATA);
}
The introduced functios check AC97 if it's ready for communication and read data is valid. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> --- sound/pci/fm801.c | 86 +++++++++++++++++++++++++++---------------------------- 1 file changed, 42 insertions(+), 44 deletions(-)