[v3,1/2] ASoC: dt-bindings: add rockchip i2s bindings

Commit Message

jianqun July 5, 2014, 11:10 a.m. UTC

From: Jianqun Xu <[e-mail]>

Add devicetree bindings for i2s controller found on
rk3066, rk3188 and rk3288 processors from rockchip.

Signed-off-by: Jianqun Xu <[e-mail]>
---
changes since v2:
- change the description of dma-names, adviced by Mark
- change the description of interrupts, adviced by Mark
- list clock-names to be easy to read, adviced by Mark
- modify compatible for rk3288 example, adviced by Mark and Heiko

changes since v1:
- modify the description of clock-names property, adviced by Mark Rutland.
- modify the example to fit for rk3288.

 .../devicetree/bindings/sound/rockchip-i2s.txt     |   37 ++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip-i2s.txt

Comments

Mark Brown July 9, 2014, 7:40 a.m. UTC | #1

On Sat, Jul 05, 2014 at 07:10:38PM +0800, jianqun wrote:
> From: Jianqun Xu <[e-mail]>
> 
> Add devicetree bindings for i2s controller found on
> rk3066, rk3188 and rk3288 processors from rockchip.

Applied both, thanks.

Patch

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
new file mode 100644
index 0000000..6c55fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,37 @@ 
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+   - "rockchip,rk3066-i2s": for rk3066
+   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
+   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: should contain the I2S interrupt.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+   - "i2s_hclk": clock for I2S BUS
+   - "i2s_clk" : clock for I2S controller
+
+Example for rk3288 I2S controller:
+
+i2s@ff890000 {
+	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+	reg = <0xff890000 0x10000>;
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dmas = <&pdma1 0>, <&pdma1 1>;
+	dma-names = "rx", "tx";
+	clock-names = "i2s_hclk", "i2s_clk";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};