diff mbox

ASoC: mcasp: don't override bclk divider if it was provided by the machine

Message ID 1405512281-8188-1-git-send-email-zonque@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Mack July 16, 2014, 12:04 p.m. UTC
If a machine driver provides an BCLK divider to the McASP driver, skip the
automatic calculation.

This fixes machines on which the physical sample transport always works
in 32 bits, even though not all of them are actually used.
snd_soc_params_to_bclk() will fail to address such cases properly.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 sound/soc/davinci/davinci-mcasp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Peter Ujfalusi July 16, 2014, 12:13 p.m. UTC | #1
On 07/16/2014 03:04 PM, Daniel Mack wrote:
> If a machine driver provides an BCLK divider to the McASP driver, skip the
> automatic calculation.
> 
> This fixes machines on which the physical sample transport always works
> in 32 bits, even though not all of them are actually used.
> snd_soc_params_to_bclk() will fail to address such cases properly.

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> 
> Signed-off-by: Daniel Mack <zonque@gmail.com>
> ---
>  sound/soc/davinci/davinci-mcasp.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
> index 0518f27..dbeb4fd 100644
> --- a/sound/soc/davinci/davinci-mcasp.c
> +++ b/sound/soc/davinci/davinci-mcasp.c
> @@ -64,6 +64,7 @@ struct davinci_mcasp {
>  	u8	num_serializer;
>  	u8	*serial_dir;
>  	u8	version;
> +	u8	bclk_div;
>  	u16	bclk_lrclk_ratio;
>  	int	streams;
>  
> @@ -420,6 +421,7 @@ static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div
>  			       ACLKXDIV(div - 1), ACLKXDIV_MASK);
>  		mcasp_mod_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG,
>  			       ACLKRDIV(div - 1), ACLKRDIV_MASK);
> +		mcasp->bclk_div = div;
>  		break;
>  
>  	case 2:		/* BCLK/LRCLK ratio */
> @@ -722,8 +724,11 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
>  	int period_size = params_period_size(params);
>  	int ret;
>  
> -	/* If mcasp is BCLK master we need to set BCLK divider */
> -	if (mcasp->bclk_master) {
> +	/*
> +	 * If mcasp is BCLK master, and a BCLK divider was not provided by
> +	 * the machine driver, we need to calculate the ratio.
> +	 */
> +	if (mcasp->bclk_master && mcasp->bclk_div == 0) {
>  		unsigned int bclk_freq = snd_soc_params_to_bclk(params);
>  		if (mcasp->sysclk_freq % bclk_freq != 0) {
>  			dev_err(mcasp->dev, "Can't produce required BCLK\n");
>
Mark Brown July 16, 2014, 9:18 p.m. UTC | #2
On Wed, Jul 16, 2014 at 02:04:41PM +0200, Daniel Mack wrote:
> If a machine driver provides an BCLK divider to the McASP driver, skip the
> automatic calculation.

Applied, thanks.  I had to merge with Peter's changes for the DMA but
the resolution looked straightforward so hopefully it's OK - you
probably want to check though.
Daniel Mack July 16, 2014, 9:19 p.m. UTC | #3
On 07/16/2014 11:18 PM, Mark Brown wrote:
> On Wed, Jul 16, 2014 at 02:04:41PM +0200, Daniel Mack wrote:
>> If a machine driver provides an BCLK divider to the McASP driver, skip the
>> automatic calculation.
> 
> Applied, thanks.  I had to merge with Peter's changes for the DMA but
> the resolution looked straightforward so hopefully it's OK - you
> probably want to check though.

Looking good, thanks!
diff mbox

Patch

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 0518f27..dbeb4fd 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -64,6 +64,7 @@  struct davinci_mcasp {
 	u8	num_serializer;
 	u8	*serial_dir;
 	u8	version;
+	u8	bclk_div;
 	u16	bclk_lrclk_ratio;
 	int	streams;
 
@@ -420,6 +421,7 @@  static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div
 			       ACLKXDIV(div - 1), ACLKXDIV_MASK);
 		mcasp_mod_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG,
 			       ACLKRDIV(div - 1), ACLKRDIV_MASK);
+		mcasp->bclk_div = div;
 		break;
 
 	case 2:		/* BCLK/LRCLK ratio */
@@ -722,8 +724,11 @@  static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 	int period_size = params_period_size(params);
 	int ret;
 
-	/* If mcasp is BCLK master we need to set BCLK divider */
-	if (mcasp->bclk_master) {
+	/*
+	 * If mcasp is BCLK master, and a BCLK divider was not provided by
+	 * the machine driver, we need to calculate the ratio.
+	 */
+	if (mcasp->bclk_master && mcasp->bclk_div == 0) {
 		unsigned int bclk_freq = snd_soc_params_to_bclk(params);
 		if (mcasp->sysclk_freq % bclk_freq != 0) {
 			dev_err(mcasp->dev, "Can't produce required BCLK\n");