diff mbox

[PATCH_V3,4/4] sound: jz4740: set i2s clk rate to 12MHz

Message ID 1422283993-53642-5-git-send-email-Zubair.Kakakhel@imgtec.com (mailing list archive)
State New, archived
Headers show

Commit Message

Zubair Lutfullah Kakakhel Jan. 26, 2015, 2:53 p.m. UTC
i2s clock rate is not set to 12MHz currently. Set it before enabling
the clock.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>

---
V2 changes: Removed clk_prepare_enable call as clock was already being
enabled elsewhere. Just set rate to 12MHz.
---
 sound/soc/jz4740/jz4740-i2s.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Zubair Lutfullah Kakakhel Jan. 27, 2015, 12:35 p.m. UTC | #1
On 26/01/15 14:53, Zubair Lutfullah Kakakhel wrote:
> i2s clock rate is not set to 12MHz currently. Set it before enabling
> the clock.
> 
> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
> 
> ---
> V2 changes: Removed clk_prepare_enable call as clock was already being
> enabled elsewhere. Just set rate to 12MHz.
> ---
>  sound/soc/jz4740/jz4740-i2s.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
> index 07f7781..c2e5852 100644
> --- a/sound/soc/jz4740/jz4740-i2s.c
> +++ b/sound/soc/jz4740/jz4740-i2s.c
> @@ -125,6 +125,7 @@ static int jz4740_i2s_startup(struct snd_pcm_substream *substream,
>  	ctrl |= JZ_AIC_CTRL_FLUSH;
>  	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
>  
> +	clk_set_rate(i2s->clk_i2s, 12000000);

Lars recommended using dt and assigned-clock-rates for this. (irc)
I've checked and it can be done.

This patch is not needed.

Patch 1-3 in this series are OK. This last one can be skipped.

Do you want me to repost the series without it? Or is this fine?

Thanks,
ZubairLK

>  	clk_prepare_enable(i2s->clk_i2s);
>  
>  	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
>
diff mbox

Patch

diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
index 07f7781..c2e5852 100644
--- a/sound/soc/jz4740/jz4740-i2s.c
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -125,6 +125,7 @@  static int jz4740_i2s_startup(struct snd_pcm_substream *substream,
 	ctrl |= JZ_AIC_CTRL_FLUSH;
 	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
 
+	clk_set_rate(i2s->clk_i2s, 12000000);
 	clk_prepare_enable(i2s->clk_i2s);
 
 	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);