[3/8] ASoC: wm8971: Cleanup manual bias level transitions

Commit Message

Lars-Peter Clausen March 30, 2015, 7:04 p.m. UTC

Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <[e-mail]>
---
 sound/soc/codecs/wm8971.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

Patch

diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 4ab034d..f9cbabd 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -629,18 +629,6 @@  static struct snd_soc_dai_driver wm8971_dai = {
 	.ops = &wm8971_dai_ops,
 };
 
-static int wm8971_suspend(struct snd_soc_codec *codec)
-{
-	wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	return 0;
-}
-
-static int wm8971_resume(struct snd_soc_codec *codec)
-{
-	wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-	return 0;
-}
-
 static int wm8971_probe(struct snd_soc_codec *codec)
 {
 	struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
@@ -649,8 +637,6 @@  static int wm8971_probe(struct snd_soc_codec *codec)
 
 	wm8971_reset(codec);
 
-	wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	/* set the update bits */
 	snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
 	snd_soc_update_bits(codec, WM8971_RDAC, 0x0100, 0x0100);
@@ -664,21 +650,10 @@  static int wm8971_probe(struct snd_soc_codec *codec)
 	return 0;
 }
 
-
-/* power down chip */
-static int wm8971_remove(struct snd_soc_codec *codec)
-{
-	wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
-	return 0;
-}
-
 static struct snd_soc_codec_driver soc_codec_dev_wm8971 = {
 	.probe =	wm8971_probe,
-	.remove =	wm8971_remove,
-	.suspend =	wm8971_suspend,
-	.resume =	wm8971_resume,
 	.set_bias_level = wm8971_set_bias_level,
+	.suspend_bias_off = true,
 
 	.controls = wm8971_snd_controls,
 	.num_controls = ARRAY_SIZE(wm8971_snd_controls),