diff mbox

ASoC: fsl_ssi: bclk should never greater than 1/5 IPG clock rate

Message ID 1449745370-18960-3-git-send-email-zidan.wang@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Zidan Wang Dec. 10, 2015, 11:02 a.m. UTC
According to the referance menual, the bclk rate must be never greater
than 1/5 IPG clock rate. But clkrate is the system clock, afreq is the
bit clock.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
---
 sound/soc/fsl/fsl_ssi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Nicolin Chen Dec. 12, 2015, 6:05 a.m. UTC | #1
On Thu, Dec 10, 2015 at 07:02:50PM +0800, Zidan Wang wrote:
> According to the referance menual, the bclk rate must be never greater
> than 1/5 IPG clock rate. But clkrate is the system clock, afreq is the
> bit clock.
> 
> Signed-off-by: Zidan Wang <zidan.wang@freescale.com>

There's already a similar fix under review.

Thanks
Nicolin

> ---
>  sound/soc/fsl/fsl_ssi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index e3abad5..4466bcb 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -677,16 +677,16 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
>  		else
>  			clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
>  
> +		clkrate /= factor;
> +		afreq = clkrate / (i + 1);
> +
>  		/*
>  		 * Hardware limitation: The bclk rate must be
>  		 * never greater than 1/5 IPG clock rate
>  		 */
> -		if (clkrate * 5 > clk_get_rate(ssi_private->clk))
> +		if (afreq * 5 > clk_get_rate(ssi_private->clk))
>  			continue;
>  
> -		clkrate /= factor;
> -		afreq = clkrate / (i + 1);
> -
>  		if (freq == afreq)
>  			sub = 0;
>  		else if (freq / afreq == 1)
> -- 
> 1.9.1
>
diff mbox

Patch

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index e3abad5..4466bcb 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -677,16 +677,16 @@  static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
 		else
 			clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
 
+		clkrate /= factor;
+		afreq = clkrate / (i + 1);
+
 		/*
 		 * Hardware limitation: The bclk rate must be
 		 * never greater than 1/5 IPG clock rate
 		 */
-		if (clkrate * 5 > clk_get_rate(ssi_private->clk))
+		if (afreq * 5 > clk_get_rate(ssi_private->clk))
 			continue;
 
-		clkrate /= factor;
-		afreq = clkrate / (i + 1);
-
 		if (freq == afreq)
 			sub = 0;
 		else if (freq / afreq == 1)