diff mbox

[v6,1/2] dt-bindings: sunxi :add sun4i SPDIF transceiver

Message ID 1454951361-10625-2-git-send-email-codekipper@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Code Kipper Feb. 8, 2016, 5:09 p.m. UTC 
From: Marcus Cooper <codekipper@gmail.com>

Add devicetree bindings for the SPDIF transceiver found on
found on Allwinners A10 and A20 SoCs.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 .../bindings/sound/sunxi,sun4i-spdif.txt           | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt

Comments

Maxime Ripard Feb. 16, 2016, 8:13 a.m. UTC | #1 
On Mon, Feb 08, 2016 at 06:09:20PM +0100, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> Add devicetree bindings for the SPDIF transceiver found on
> found on Allwinners A10 and A20 SoCs.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Thanks!
Maxime
Mark Brown Feb. 19, 2016, 4:21 p.m. UTC | #2 
On Mon, Feb 08, 2016 at 06:09:20PM +0100, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> Add devicetree bindings for the SPDIF transceiver found on
> found on Allwinners A10 and A20 SoCs.

Please use subject lines matching the style for the subsystem.  This
makes it easier for people to identify relevant patches.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
new file mode 100644
index 0000000..13503aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -0,0 +1,39 @@ 
+Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+The Allwinner S/PDIF audio block is a transceiver that allows the
+processor to receive and transmit digital audio via an coaxial cable or
+a fibre cable.
+For now only playback is supported.
+
+Required properties:
+
+  - compatible		: should be one of the following:
+    - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Includes the following entries:
+	"apb"		  clock for the spdif bus.
+	"spdif"		  clock for spdif controller.
+
+Example:
+
+spdif: spdif@01c21000 {
+	compatible = "allwinner,sun4i-a10-spdif";
+	reg = <0x01c21000 0x40>;
+	interrupts = <13>;
+	clocks = <&apb0_gates 1>, <&spdif_clk>;
+	clock-names = "apb", "spdif";
+	dmas = <&dma 0 2>, <&dma 0 2>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};