diff mbox

ASoC: sgtl5000: Place optional properties in the correct section

Message ID 1464727310-10034-1-git-send-email-festevam@gmail.com (mailing list archive)
State Accepted
Commit 10ff08029d9880e4bf70de0535f34ce239af7a9a
Headers show

Commit Message

Fabio Estevam May 31, 2016, 8:41 p.m. UTC 
From: Fabio Estevam <fabio.estevam@nxp.com>

'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional
properties, so move them below the 'Optional properties' line.

While at it, fix a typo in 'mentioned'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 0e5e4eb..5666da7 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -7,6 +7,14 @@  Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
 	The resistor can take values of 2k, 4k or 8k.
 	If set to 0 it will be off.
@@ -15,17 +23,9 @@  Required properties:
 
 - micbias-voltage-m-volts : the bias voltage to be used in mVolts
 	The voltage can take values from 1.25V to 3V by 250mV steps
-	If this node is not mentionned or the value is unknown, then
+	If this node is not mentioned or the value is unknown, then
 	the value is set to 1.25V.
 
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
 Example:
 
 codec: sgtl5000@0a {