diff mbox

[v3] ASoC: exynos: organize the asoc audio into a menu

Message ID 1474311470-23175-1-git-send-email-ayaka@soulik.info (mailing list archive)
State Accepted
Commit 090d93488135c8422d7711a8cefa4ed1cff7744a
Headers show

Commit Message

Randy Li Sept. 19, 2016, 6:57 p.m. UTC 
It is simple sound card time, we could assign different codec
to a interface without making a specific driver for it. The SPDIF
and I2S interface for Samsung would be possible used by
simple-sound-card, but not sure about the PCM.

Those S3C time entries are left alone as I don't think any new board
would need them.

Signed-off-by: Randy Li <ayaka@soulik.info>
---
 sound/soc/samsung/Kconfig | 57 ++++++++++++++++++++++++-----------------------
 1 file changed, 29 insertions(+), 28 deletions(-)

Comments

Krzysztof Kozlowski Sept. 20, 2016, 5:26 p.m. UTC | #1 
On Tue, Sep 20, 2016 at 02:57:50AM +0800, Randy Li wrote:
> It is simple sound card time, we could assign different codec
> to a interface without making a specific driver for it. The SPDIF
> and I2S interface for Samsung would be possible used by
> simple-sound-card, but not sure about the PCM.
> 
> Those S3C time entries are left alone as I don't think any new board
> would need them.
> 
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
>  sound/soc/samsung/Kconfig | 57 ++++++++++++++++++++++++-----------------------
>  1 file changed, 29 insertions(+), 28 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7b722b0..f6023b4 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,12 +1,14 @@ 
-config SND_SOC_SAMSUNG
+menuconfig SND_SOC_SAMSUNG
 	tristate "ASoC support for Samsung"
 	depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
 	select SND_SOC_GENERIC_DMAENGINE_PCM
-	help
+	---help---
 	  Say Y or M if you want to add support for codecs attached to
 	  the Samsung SoCs' Audio interfaces. You will also need to
 	  select the audio interfaces to support below.
 
+if SND_SOC_SAMSUNG
+
 config SND_S3C24XX_I2S
 	tristate
 
@@ -18,22 +20,22 @@  config SND_S3C2412_SOC_I2S
 	select SND_S3C_I2SV2_SOC
 
 config SND_SAMSUNG_PCM
-	tristate
+	tristate "Samsung PCM interface support"
 
 config SND_SAMSUNG_AC97
 	tristate
 	select SND_SOC_AC97_BUS
 
 config SND_SAMSUNG_SPDIF
-	tristate
+	tristate "Samsung SPDIF transmitter support"
 	select SND_SOC_SPDIF
 
 config SND_SAMSUNG_I2S
-	tristate
+	tristate "Samsung I2S interface support"
 
 config SND_SOC_SAMSUNG_NEO1973_WM8753
 	tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
-	depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
+	depends on MACH_NEO1973_GTA02
 	select SND_S3C24XX_I2S
 	select SND_SOC_WM8753
 	select SND_SOC_BT_SCO
@@ -43,7 +45,7 @@  config SND_SOC_SAMSUNG_NEO1973_WM8753
 
 config SND_SOC_SAMSUNG_JIVE_WM8750
 	tristate "SoC I2S Audio support for Jive"
-	depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C
+	depends on MACH_JIVE && I2C
 	select SND_SOC_WM8750
 	select SND_S3C2412_SOC_I2S
 	help
@@ -51,7 +53,7 @@  config SND_SOC_SAMSUNG_JIVE_WM8750
 
 config SND_SOC_SAMSUNG_SMDK_WM8580
 	tristate "SoC I2S Audio support for WM8580 on SMDK"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+	depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
 	depends on I2C
 	select SND_SOC_WM8580
 	select SND_SAMSUNG_I2S
@@ -60,7 +62,6 @@  config SND_SOC_SAMSUNG_SMDK_WM8580
 
 config SND_SOC_SAMSUNG_SMDK_WM8994
 	tristate "SoC I2S Audio support for WM8994 on SMDK"
-	depends on SND_SOC_SAMSUNG
 	depends on I2C=y
 	select MFD_WM8994
 	select SND_SOC_WM8994
@@ -70,7 +71,7 @@  config SND_SOC_SAMSUNG_SMDK_WM8994
 
 config SND_SOC_SAMSUNG_SMDK2443_WM9710
 	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
-	depends on SND_SOC_SAMSUNG && MACH_SMDK2443
+	depends on MACH_SMDK2443
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
 	select SND_SAMSUNG_AC97
@@ -80,7 +81,7 @@  config SND_SOC_SAMSUNG_SMDK2443_WM9710
 
 config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	depends on ARCH_S3C24XX
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
 	select SND_SAMSUNG_AC97
@@ -90,7 +91,7 @@  config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 
 config SND_SOC_SAMSUNG_S3C24XX_UDA134X
 	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+	depends on ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_L3
 	select SND_SOC_UDA134X
@@ -102,21 +103,21 @@  config SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
 	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+	depends on ARCH_S3C24XX && I2C
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC23_I2C
 	select SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_HERMES
 	tristate "SoC I2S Audio support for Simtec Hermes board"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+	depends on ARCH_S3C24XX && I2C
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC3X
 	select SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_H1940_UDA1380
 	tristate "Audio support for the HP iPAQ H1940"
-	depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C
+	depends on ARCH_H1940 && I2C
 	select SND_S3C24XX_I2S
 	select SND_SOC_UDA1380
 	help
@@ -124,7 +125,7 @@  config SND_SOC_SAMSUNG_H1940_UDA1380
 
 config SND_SOC_SAMSUNG_RX1950_UDA1380
 	tristate "Audio support for the HP iPAQ RX1950"
-	depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C
+	depends on MACH_RX1950 && I2C
 	select SND_S3C24XX_I2S
 	select SND_SOC_UDA1380
 	help
@@ -132,7 +133,7 @@  config SND_SOC_SAMSUNG_RX1950_UDA1380
 
 config SND_SOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+	depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
 	select SND_SOC_WM9713
 	select SND_SAMSUNG_AC97
 	help
@@ -140,20 +141,19 @@  config SND_SOC_SAMSUNG_SMDK_WM9713
 
 config SND_SOC_SMARTQ
 	tristate "SoC I2S Audio support for SmartQ board"
-	depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C
+	depends on MACH_SMARTQ && I2C
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8750
 
 config SND_SOC_SAMSUNG_SMDK_SPDIF
 	tristate "SoC S/PDIF Audio support for SMDK"
-	depends on SND_SOC_SAMSUNG
 	select SND_SAMSUNG_SPDIF
 	help
 	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
 
 config SND_SOC_SMDK_WM8580_PCM
 	tristate "SoC PCM Audio support for WM8580 on SMDK"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110)
+	depends on MACH_SMDKV210 || MACH_SMDKC110
 	depends on I2C
 	select SND_SOC_WM8580
 	select SND_SAMSUNG_PCM
@@ -162,7 +162,6 @@  config SND_SOC_SMDK_WM8580_PCM
 
 config SND_SOC_SMDK_WM8994_PCM
 	tristate "SoC PCM Audio support for WM8994 on SMDK"
-	depends on SND_SOC_SAMSUNG
 	depends on I2C=y
 	select MFD_WM8994
 	select SND_SOC_WM8994
@@ -172,7 +171,7 @@  config SND_SOC_SMDK_WM8994_PCM
 
 config SND_SOC_SPEYSIDE
 	tristate "Audio support for Wolfson Speyside"
-	depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+	depends on I2C && SPI_MASTER
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8996
@@ -182,14 +181,14 @@  config SND_SOC_SPEYSIDE
 
 config SND_SOC_TOBERMORY
 	tristate "Audio support for Wolfson Tobermory"
-	depends on SND_SOC_SAMSUNG && INPUT && I2C
+	depends on INPUT && I2C
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8962
 
 config SND_SOC_BELLS
 	tristate "Audio support for Wolfson Bells"
-	depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+	depends on MFD_ARIZONA && I2C && SPI_MASTER
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM5102
@@ -200,7 +199,7 @@  config SND_SOC_BELLS
 
 config SND_SOC_LOWLAND
 	tristate "Audio support for Wolfson Lowland"
-	depends on SND_SOC_SAMSUNG && I2C
+	depends on I2C
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM5100
@@ -208,7 +207,7 @@  config SND_SOC_LOWLAND
 
 config SND_SOC_LITTLEMILL
 	tristate "Audio support for Wolfson Littlemill"
-	depends on SND_SOC_SAMSUNG && I2C
+	depends on I2C
 	depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
 	select SND_SAMSUNG_I2S
 	select MFD_WM8994
@@ -216,7 +215,7 @@  config SND_SOC_LITTLEMILL
 
 config SND_SOC_SNOW
 	tristate "Audio support for Google Snow boards"
-	depends on SND_SOC_SAMSUNG && I2C
+	depends on I2C
 	select SND_SOC_MAX98090
 	select SND_SOC_MAX98095
 	select SND_SAMSUNG_I2S
@@ -226,6 +225,8 @@  config SND_SOC_SNOW
 
 config SND_SOC_ARNDALE_RT5631_ALC5631
         tristate "Audio support for RT5631(ALC5631) on Arndale Board"
-        depends on SND_SOC_SAMSUNG && I2C
+        depends on I2C
         select SND_SAMSUNG_I2S
         select SND_SOC_RT5631
+
+endif #SND_SOC_SAMSUNG