diff mbox

[v2,1/3] ASoC: cs42xx8: Mark chip ID as volatile and remove cache bypass

Message ID 1477410151-17515-1-git-send-email-ckeepax@opensource.wolfsonmicro.com (mailing list archive)
State Accepted
Commit 03d2ec460f126d8f4409d137b5865bc4eca253c0
Headers show

Commit Message

Charles Keepax Oct. 25, 2016, 3:42 p.m. UTC 
Rather than manually enabling cache bypass when reading the ID registers
simply remove the default which will cause the first read to go to the
hardware. The old code worked this is simply the more standard way to
implement this. There is a comment included in the code that claims the
chip ID register also contains the right input volume, however this is
clearly not the case from the rest of the driver. Further investigation
reveals exactly the same comment in the wm8962 driver, where this is the
case, so this is almost certainly a copy and paste error from when the
driver was created.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
---

Changes since v1:
 - Don't mark the ID register as volatile.

Thanks,
Charles

 sound/soc/codecs/cs42xx8.c | 10 ----------
 1 file changed, 10 deletions(-)
diff mbox

Patch

diff --git a/sound/soc/codecs/cs42xx8.c b/sound/soc/codecs/cs42xx8.c
index b4d8737..c1785bd 100644
--- a/sound/soc/codecs/cs42xx8.c
+++ b/sound/soc/codecs/cs42xx8.c
@@ -321,7 +321,6 @@  static struct snd_soc_dai_driver cs42xx8_dai = {
 };
 
 static const struct reg_default cs42xx8_reg[] = {
-	{ 0x01, 0x01 },   /* Chip I.D. and Revision Register */
 	{ 0x02, 0x00 },   /* Power Control */
 	{ 0x03, 0xF0 },   /* Functional Mode */
 	{ 0x04, 0x46 },   /* Interface Formats */
@@ -498,13 +497,6 @@  int cs42xx8_probe(struct device *dev, struct regmap *regmap)
 	/* Make sure hardware reset done */
 	msleep(5);
 
-	/*
-	 * We haven't marked the chip revision as volatile due to
-	 * sharing a register with the right input volume; explicitly
-	 * bypass the cache to read it.
-	 */
-	regcache_cache_bypass(cs42xx8->regmap, true);
-
 	/* Validate the chip ID */
 	ret = regmap_read(cs42xx8->regmap, CS42XX8_CHIPID, &val);
 	if (ret < 0) {
@@ -523,8 +515,6 @@  int cs42xx8_probe(struct device *dev, struct regmap *regmap)
 	dev_info(dev, "found device, revision %X\n",
 			val & CS42XX8_CHIPID_REV_ID_MASK);
 
-	regcache_cache_bypass(cs42xx8->regmap, false);
-
 	cs42xx8_dai.name = cs42xx8->drvdata->name;
 
 	/* Each adc supports stereo input */