@@ -119,15 +119,6 @@ config SND_SOC_SAMSUNG_SMDK_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
-config SND_SOC_SMDK_WM8580_PCM
- tristate "SoC PCM Audio support for WM8580 on SMDK"
- depends on MACH_SMDKV210 || MACH_SMDKC110
- depends on I2C
- select SND_SOC_WM8580
- select SND_SAMSUNG_PCM
- help
- Say Y if you want to add support for SoC audio on the SMDK.
-
config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
depends on I2C=y
@@ -34,7 +34,6 @@ snd-soc-snow-objs := snow.o
snd-soc-smdk-wm9713-objs := smdk_wm9713.o
snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
snd-soc-smdk-spdif-objs := smdk_spdif.o
-snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
snd-soc-speyside-objs := speyside.o
snd-soc-tobermory-objs := tobermory.o
@@ -59,7 +58,6 @@ obj-$(CONFIG_SND_SOC_SNOW) += snd-soc-snow.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o
obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
-obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
obj-$(CONFIG_SND_SOC_TOBERMORY) += snd-soc-tobermory.o
deleted file mode 100644
@@ -1,175 +0,0 @@
-/*
- * sound/soc/samsung/smdk_wm8580pcm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co. Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <sound/soc.h>
-#include <sound/pcm_params.h>
-#include <sound/pcm.h>
-
-#include <asm/mach-types.h>
-
-#include "../codecs/wm8580.h"
-#include "pcm.h"
-
-/*
- * Board Settings:
- * o '1' means 'ON'
- * o '0' means 'OFF'
- * o 'X' means 'Don't care'
- *
- * SMDK6410 Base B/D: CFG1-0000, CFG2-1111
- * SMDKC110, SMDKV210: CFGB11-100100, CFGB12-0000
- */
-
-#define SMDK_WM8580_EXT_OSC 12000000
-#define SMDK_WM8580_EXT_MCLK 4096000
-#define SMDK_WM8580_EXT_VOICE 2048000
-
-static unsigned long mclk_freq;
-static unsigned long xtal_freq;
-
-/*
- * If MCLK clock directly gets from XTAL, we don't have to use PLL
- * to make MCLK, but if XTAL clock source connects with other codec
- * pin (like XTI), we should have to set codec's PLL to make MCLK.
- * Because Samsung SoC does not support pcmcdclk output like I2S.
- */
-
-static int smdk_wm8580_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int rfs, ret;
-
- switch (params_rate(params)) {
- case 8000:
- break;
- default:
- printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n",
- __func__, __LINE__, params_rate(params));
- return -EINVAL;
- }
-
- rfs = mclk_freq / params_rate(params) / 2;
-
- if (mclk_freq == xtal_freq) {
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_MCLK,
- mclk_freq, SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
- WM8580_CLKSRC_MCLK);
- if (ret < 0)
- return ret;
- } else {
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
- mclk_freq, SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
- WM8580_CLKSRC_PLLA);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
- xtal_freq, mclk_freq);
- if (ret < 0)
- return ret;
- }
-
- /* Set PCM source clock on CPU */
- ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
- mclk_freq, SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* Set SCLK_DIV for making bclk */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static struct snd_soc_ops smdk_wm8580_pcm_ops = {
- .hw_params = smdk_wm8580_pcm_hw_params,
-};
-
-#define SMDK_DAI_FMT (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | \
- SND_SOC_DAIFMT_CBS_CFS)
-
-static struct snd_soc_dai_link smdk_dai[] = {
- {
- .name = "WM8580 PAIF PCM RX",
- .stream_name = "Playback",
- .cpu_dai_name = "samsung-pcm.0",
- .codec_dai_name = "wm8580-hifi-playback",
- .platform_name = "samsung-audio",
- .codec_name = "wm8580.0-001b",
- .dai_fmt = SMDK_DAI_FMT,
- .ops = &smdk_wm8580_pcm_ops,
- }, {
- .name = "WM8580 PAIF PCM TX",
- .stream_name = "Capture",
- .cpu_dai_name = "samsung-pcm.0",
- .codec_dai_name = "wm8580-hifi-capture",
- .platform_name = "samsung-pcm.0",
- .codec_name = "wm8580.0-001b",
- .dai_fmt = SMDK_DAI_FMT,
- .ops = &smdk_wm8580_pcm_ops,
- },
-};
-
-static struct snd_soc_card smdk_pcm = {
- .name = "SMDK-PCM",
- .owner = THIS_MODULE,
- .dai_link = smdk_dai,
- .num_links = 2,
-};
-
-/*
- * After SMDKC110 Base Board's Rev is '0.1', 12MHz External OSC(X1)
- * is absent (or not connected), so we connect EXT_VOICE_CLK(OSC4),
- * 2.0484Mhz, directly with MCLK both Codec and SoC.
- */
-static int snd_smdk_probe(struct platform_device *pdev)
-{
- int ret = 0;
-
- xtal_freq = SMDK_WM8580_EXT_OSC;
- mclk_freq = SMDK_WM8580_EXT_MCLK;
-
- if (machine_is_smdkc110() || machine_is_smdkv210())
- xtal_freq = mclk_freq = SMDK_WM8580_EXT_VOICE;
-
- smdk_pcm.dev = &pdev->dev;
- ret = devm_snd_soc_register_card(&pdev->dev, &smdk_pcm);
- if (ret)
- dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
-
- return ret;
-}
-
-static struct platform_driver snd_smdk_driver = {
- .driver = {
- .name = "samsung-smdk-pcm",
- },
- .probe = snd_smdk_probe,
-};
-
-module_platform_driver(snd_smdk_driver);
-
-MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("ALSA SoC SMDK WM8580 for PCM");
-MODULE_LICENSE("GPL");
The SND_SOC_SMDK_WM8580_PCM Kconfig entry depends on either MACH_SMDKV210 or MACH_SMDKC110. Both of which were removed in commit 28c8331d386a ("ARM: S5PV210: Remove support for board files") over two years ago. The driver has been unselectable ever since. Considering the lack of complaints about this it can be concluded that the driver is unused and can be removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> --- sound/soc/samsung/Kconfig | 9 -- sound/soc/samsung/Makefile | 2 - sound/soc/samsung/smdk_wm8580pcm.c | 175 ------------------------------------- 3 files changed, 186 deletions(-) delete mode 100644 sound/soc/samsung/smdk_wm8580pcm.c