diff mbox

[5/5] Input: arizona-haptics - Use SoC component pin control functions

Message ID 1480354350-24978-6-git-send-email-rf@opensource.wolfsonmicro.com (mailing list archive)
State Accepted
Commit 931afc4114c59b8fe8386db9fcdfe69a1322cae6
Headers show

Commit Message

Richard Fitzgerald Nov. 28, 2016, 5:32 p.m. UTC
The name of a codec pin can have an optional prefix string, which is
defined by the SoC machine driver. The snd_soc_dapm_x_pin functions
take the fully-specified name including the prefix and so the existing
code would fail to find the pin if the audio machine driver had added
a prefix.

Switch to using the snd_soc_component_x_pin equivalent functions that
take a specified SoC component and automatically add the name prefix to
the provided pin name.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/input/misc/arizona-haptics.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

Comments

Dmitry Torokhov Nov. 28, 2016, 6:53 p.m. UTC | #1
Hi Richard,

On Mon, Nov 28, 2016 at 05:32:30PM +0000, Richard Fitzgerald wrote:
> The name of a codec pin can have an optional prefix string, which is
> defined by the SoC machine driver. The snd_soc_dapm_x_pin functions
> take the fully-specified name including the prefix and so the existing
> code would fail to find the pin if the audio machine driver had added
> a prefix.
> 
> Switch to using the snd_soc_component_x_pin equivalent functions that
> take a specified SoC component and automatically add the name prefix to
> the provided pin name.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>

If ASOC folks are fine with this then I am otto. Please merge with the rest of
Arizona changes.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Thanks.
diff mbox

Patch

diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
index 9829363..07ec465 100644
--- a/drivers/input/misc/arizona-haptics.c
+++ b/drivers/input/misc/arizona-haptics.c
@@ -37,6 +37,8 @@  static void arizona_haptics_work(struct work_struct *work)
 						       struct arizona_haptics,
 						       work);
 	struct arizona *arizona = haptics->arizona;
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(arizona->dapm);
 	int ret;
 
 	if (!haptics->arizona->dapm) {
@@ -66,7 +68,7 @@  static void arizona_haptics_work(struct work_struct *work)
 			return;
 		}
 
-		ret = snd_soc_dapm_enable_pin(arizona->dapm, "HAPTICS");
+		ret = snd_soc_component_enable_pin(component, "HAPTICS");
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to start HAPTICS: %d\n",
 				ret);
@@ -81,7 +83,7 @@  static void arizona_haptics_work(struct work_struct *work)
 		}
 	} else {
 		/* This disable sequence will be a noop if already enabled */
-		ret = snd_soc_dapm_disable_pin(arizona->dapm, "HAPTICS");
+		ret = snd_soc_component_disable_pin(component, "HAPTICS");
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to disable HAPTICS: %d\n",
 				ret);
@@ -140,11 +142,14 @@  static int arizona_haptics_play(struct input_dev *input, void *data,
 static void arizona_haptics_close(struct input_dev *input)
 {
 	struct arizona_haptics *haptics = input_get_drvdata(input);
+	struct snd_soc_component *component;
 
 	cancel_work_sync(&haptics->work);
 
-	if (haptics->arizona->dapm)
-		snd_soc_dapm_disable_pin(haptics->arizona->dapm, "HAPTICS");
+	if (haptics->arizona->dapm) {
+		component = snd_soc_dapm_to_component(haptics->arizona->dapm);
+		snd_soc_component_disable_pin(component, "HAPTICS");
+	}
 }
 
 static int arizona_haptics_probe(struct platform_device *pdev)