diff mbox

[2/2] ASoC: Add driver for CX2092X I2S Audio DSP

Message ID 1487427991-18174-3-git-send-email-simon.ho@conexant.com (mailing list archive)
State New, archived
Headers show

Commit Message

simon.ho.cnxt@gmail.com Feb. 18, 2017, 2:26 p.m. UTC
From: Simon Ho <simon.ho@conexant.com>

Initial commit of the Conexant CX20921/CX20924 I2S audio DSP driver

The CX2092X is a far field voice input processor SoC with ADC.

Signed-off-by: Simon Ho <simon.ho@conexant.com>
---
 sound/soc/codecs/Kconfig       |  17 ++
 sound/soc/codecs/Makefile      |   6 +
 sound/soc/codecs/cx2092x-i2c.c |  54 ++++++
 sound/soc/codecs/cx2092x-spi.c |  57 ++++++
 sound/soc/codecs/cx2092x.c     | 419 +++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/cx2092x.h     |  26 +++
 6 files changed, 579 insertions(+)
 create mode 100644 sound/soc/codecs/cx2092x-i2c.c
 create mode 100644 sound/soc/codecs/cx2092x-spi.c
 create mode 100644 sound/soc/codecs/cx2092x.c
 create mode 100644 sound/soc/codecs/cx2092x.h

Comments

Mark Brown Feb. 19, 2017, 4:27 p.m. UTC | #1
On Sat, Feb 18, 2017 at 10:26:31PM +0800, simon.ho.cnxt@gmail.com wrote:

> +static const struct snd_kcontrol_new cx2092x_snd_controls[] = {
> +	CX2092X_CONTROL("SendCmd", cmd_info, cmd_get, cmd_put,
> +		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
> +		SNDRV_CTL_ELEM_ACCESS_VOLATILE),

This is just tunnels commands from some magic userspace application
straight through to the device, taking all the control out of standard
Linux.  What are these controls doing and why aren't we managing them
through standard interfaces?  This tends to end up creating problems
with things like power management as for example userspace might not
figure out that things like suspend and resume are happening.

> +static int cx2092x_reset(struct snd_soc_codec *codec)
> +{
> +	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
> +
> +	if (gpio_is_valid(cx2092x->gpio_reset)) {
> +		gpio_set_value(cx2092x->gpio_reset, 0);
> +		mdelay(10);
> +		gpio_set_value(cx2092x->gpio_reset, 1);

Use the _cansleep() versions unless you've got a good reason not to,
that way GPIOs on slow buses can be used.

> +	if (of_match_device(cx2092x_dt_ids, dev))
> +		cx2092x->gpio_reset =
> +			of_get_named_gpio(dev->of_node, "reset-gpio", 0);

Why do we care if we managed to match the device ID?  The GPIO is
optional anyway.  It's also better to use the gpiod_ APIs if you can,
that's more modern and removes the need to special case DT.

> +	if (gpio_is_valid(cx2092x->gpio_reset)) {
> +		int ret;

Don't declare variables in the middle of functions.
simon.ho.cnxt@gmail.com Feb. 20, 2017, 2:33 a.m. UTC | #2
On Sun, Feb 19, 2017 at 04:27:17PM +0000, Mark Brown wrote:
> On Sat, Feb 18, 2017 at 10:26:31PM +0800, simon.ho.cnxt@gmail.com wrote:
> 
> > +static const struct snd_kcontrol_new cx2092x_snd_controls[] = {
> > +	CX2092X_CONTROL("SendCmd", cmd_info, cmd_get, cmd_put,
> > +		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
> > +		SNDRV_CTL_ELEM_ACCESS_VOLATILE),
> 
> This is just tunnels commands from some magic userspace application
> straight through to the device, taking all the control out of standard
> Linux.  What are these controls doing and why aren't we managing them
> through standard interfaces?  This tends to end up creating problems
> with things like power management as for example userspace might not
> figure out that things like suspend and resume are happening.
> 

This device is designed for virtual assisant application need to be always
open, listening for users to summon it. There is no any power saving mode 
support on this device. The processed voice data will be sent to automatic 
speech recognition (ASR) application for further processing and the
processed voice data will be optimized for ASR rather than a human being.
So such as mute and volume gain control are not necessary. These tunnels 
commands are actucally for debugging purpose only, they won't be used on
normal operation.  

> > +static int cx2092x_reset(struct snd_soc_codec *codec)
> > +{
> > +	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
> > +
> > +	if (gpio_is_valid(cx2092x->gpio_reset)) {
> > +		gpio_set_value(cx2092x->gpio_reset, 0);
> > +		mdelay(10);
> > +		gpio_set_value(cx2092x->gpio_reset, 1);
> 
> Use the _cansleep() versions unless you've got a good reason not to,
> that way GPIOs on slow buses can be used.
> 

Thanks for input, I changed it to _cansleep() version.

> > +	if (of_match_device(cx2092x_dt_ids, dev))
> > +		cx2092x->gpio_reset =
> > +			of_get_named_gpio(dev->of_node, "reset-gpio", 0);
> 
> Why do we care if we managed to match the device ID?  The GPIO is
> optional anyway.  It's also better to use the gpiod_ APIs if you can,
> that's more modern and removes the need to special case DT.
> 

No, we don't need to care the deivce ID. Remved.

Learned, will use gpiod_ APIs instead.

> > +	if (gpio_is_valid(cx2092x->gpio_reset)) {
> > +		int ret;
> 
> Don't declare variables in the middle of functions.

Understood. corrected it.
Mark Brown Feb. 21, 2017, 6:55 p.m. UTC | #3
On Mon, Feb 20, 2017 at 10:33:32AM +0800, Simon Ho wrote:
> On Sun, Feb 19, 2017 at 04:27:17PM +0000, Mark Brown wrote:

> > through standard interfaces?  This tends to end up creating problems
> > with things like power management as for example userspace might not
> > figure out that things like suspend and resume are happening.

> This device is designed for virtual assisant application need to be always
> open, listening for users to summon it. There is no any power saving mode 
> support on this device. The processed voice data will be sent to automatic 

Power management is just one example of system integration, and frankly
even there it's entirely possible that someone will want to disable the
functionality some of the time and hence power down the device.

> So such as mute and volume gain control are not necessary. These tunnels 
> commands are actucally for debugging purpose only, they won't be used on
> normal operation.  

So are they even needed in mainline?  How will the device function
within the system, there's no visible interface for reading back
status...?  Right now it's hard to see how this device functions
usefully in a system.
diff mbox

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 37a4a43..79b3512 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -63,6 +63,8 @@  config SND_SOC_ALL_CODECS
 	select SND_SOC_CS47L24 if MFD_CS47L24
 	select SND_SOC_CS53L30 if I2C
 	select SND_SOC_CX20442 if TTY
+	select SND_SOC_CX2092X_I2C if I2C
+	select SND_SOC_CX2092X_SPI if SPI_MASTER
 	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_DA7213 if I2C
 	select SND_SOC_DA7218 if I2C
@@ -491,6 +493,21 @@  config SND_SOC_CX20442
 	tristate
 	depends on TTY
 
+config SND_SOC_CX2092X
+	tristate
+
+config SND_SOC_CX2092X_I2C
+	tristate "Conexant CX20921/CX2094 CODEC (I2C)"
+	depends on I2C
+	select SND_SOC_CX2092X
+	select REGMAP_I2C
+
+config SND_SOC_CX2092X_SPI
+	tristate "Conexant CX20921/CX2094 CODEC (SPI)"
+	depends on SPI_MASTER
+	select SND_SOC_CX2092X
+	select REGMAP_SPI
+
 config SND_SOC_JZ4740_CODEC
 	select REGMAP_MMIO
 	tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 1796cb9..e30a398 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -56,6 +56,9 @@  snd-soc-cs4349-objs := cs4349.o
 snd-soc-cs47l24-objs := cs47l24.o
 snd-soc-cs53l30-objs := cs53l30.o
 snd-soc-cx20442-objs := cx20442.o
+snd-soc-cx2092x-objs := cx2092x.o
+snd-soc-cx2092x-i2c-objs := cx2092x-i2c.o
+snd-soc-cx2092x-spi-objs := cx2092x-spi.o
 snd-soc-da7210-objs := da7210.o
 snd-soc-da7213-objs := da7213.o
 snd-soc-da7218-objs := da7218.o
@@ -286,6 +289,9 @@  obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
 obj-$(CONFIG_SND_SOC_CS47L24)	+= snd-soc-cs47l24.o
 obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
+obj-$(CONFIG_SND_SOC_CX2092X)	+= snd-soc-cx2092x.o
+obj-$(CONFIG_SND_SOC_CX2092X_I2C)	+= snd-soc-cx2092x-i2c.o
+obj-$(CONFIG_SND_SOC_CX2092X_SPI)	+= snd-soc-cx2092x-spi.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o
 obj-$(CONFIG_SND_SOC_DA7213)	+= snd-soc-da7213.o
 obj-$(CONFIG_SND_SOC_DA7218)	+= snd-soc-da7218.o
diff --git a/sound/soc/codecs/cx2092x-i2c.c b/sound/soc/codecs/cx2092x-i2c.c
new file mode 100644
index 0000000..a07800e
--- /dev/null
+++ b/sound/soc/codecs/cx2092x-i2c.c
@@ -0,0 +1,54 @@ 
+/*
+ * cx2092x-i2c.c -- CX20921 and CX20924 I2C Audio driver
+ *
+ * Copyright:   (C) 2017 Conexant Systems, Inc.
+ *
+ * This is based on Alexander Sverdlin's CS4271 driver code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <sound/soc.h>
+#include "cx2092x.h"
+
+static int cx2092x_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	return cx2092x_dev_probe(&i2c->dev,
+			devm_regmap_init_i2c(i2c, &cx2092x_regmap_config));
+}
+static int cx2092x_i2c_remove(struct i2c_client *client)
+{
+	snd_soc_unregister_codec(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id cx2092x_i2c_id[] = {
+	{"cx20921", 0},
+	{"cx20924", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, cx2092x_i2c_id);
+
+static struct i2c_driver cx2092x_i2c_driver = {
+	.driver = {
+		.name = "cx2092x",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(cx2092x_dt_ids),
+	},
+	.id_table = cx2092x_i2c_id,
+	.probe = cx2092x_i2c_probe,
+	.remove = cx2092x_i2c_remove,
+};
+module_i2c_driver(cx2092x_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC CX2092X I2C Driver");
+MODULE_AUTHOR("Simon Ho <simon.ho@conexant.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/cx2092x-spi.c b/sound/soc/codecs/cx2092x-spi.c
new file mode 100644
index 0000000..3723909
--- /dev/null
+++ b/sound/soc/codecs/cx2092x-spi.c
@@ -0,0 +1,57 @@ 
+/*
+ * cx2092x-spi.c -- CX20921 and CX20924 SPI Audio driver
+ *
+ * Copyright:   (C) 2017 Conexant Systems, Inc.
+ *
+ * This is based on Alexander Sverdlin's CS4271 driver code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <sound/soc.h>
+#include "cx2092x.h"
+
+static int cx2092x_spi_probe(struct spi_device *spi)
+{
+	struct regmap_config config;
+
+	config = cx2092x_regmap_config;
+	config.write_flag_mask = 0x81;
+
+	return cx2092x_dev_probe(&spi->dev,
+			devm_regmap_init_spi(spi, &cx2092x_regmap_config));
+}
+
+static int cx2092x_spi_remove(struct spi_device *spi)
+{
+	snd_soc_unregister_codec(&spi->dev);
+	return 0;
+}
+
+static const struct spi_device_id cx2092x_spi_id[] = {
+	{"cx20921", 0},
+	{"cx20924", 0},
+	{}
+};
+
+static struct spi_driver cx2092x_spi_driver = {
+	.driver = {
+		.name = "cx2092x",
+		.of_match_table = of_match_ptr(cx2092x_dt_ids),
+	},
+	.id_table = cx2092x_spi_id,
+	.probe = cx2092x_spi_probe,
+	.remove = cx2092x_spi_remove,
+};
+
+module_spi_driver(cx2092x_spi_driver);
+
+MODULE_DESCRIPTION("ASoC CX2092X SPI Driver");
+MODULE_AUTHOR("Simon Ho <simon.ho@conexant.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/cx2092x.c b/sound/soc/codecs/cx2092x.c
new file mode 100644
index 0000000..a231ee1
--- /dev/null
+++ b/sound/soc/codecs/cx2092x.c
@@ -0,0 +1,419 @@ 
+/*
+ * cx2092x.c -- CX20921 and CX20924 ALSA SoC Audio driver
+ *
+ * Copyright:   (C) 2017 Conexant Systems, Inc.
+ *
+ * This is based on Alexander Sverdlin's CS4271 driver code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include "cx2092x.h"
+
+#define CX2092X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+			 SNDRV_PCM_FMTBIT_S24_LE | \
+			 SNDRV_PCM_FMTBIT_S32_LE)
+
+#define CX2092X_CAPE_ID(a, b, c, d)  (((a) - 0x20) << 8 | \
+				      ((b) - 0x20) << 14| \
+				      ((c) - 0x20) << 20| \
+				      ((d) - 0x20) << 26)
+
+#define CX2092X_ID2CH_A(id)  (((((unsigned int)(id)) >> 8) & 0x3f) + 0x20)
+#define CX2092X_ID2CH_B(id)  (((((unsigned int)(id)) >> 14) & 0x3f) + 0x20)
+#define CX2092X_ID2CH_C(id)  (((((unsigned int)(id)) >> 20) & 0x3f) + 0x20)
+#define CX2092X_ID2CH_D(id)  (((((unsigned int)(id)) >> 26) & 0x3f) + 0x20)
+
+#define CX2092X_CONTROL(xname, xinfo, xget, xput, xaccess) { \
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = xaccess, .info = xinfo, .get = xget, .put = xput, \
+	}
+
+#define CX2092X_CMD_GET(item)   ((item) |  0x0100)
+#define CX2092X_CMD_SIZE 13
+
+/*
+ * Defines the command format which is used to communicate with cx2092x device.
+ */
+struct cx2092x_cmd {
+	int	num_32b_words:16;   /* Indicates how many data to be sent.
+				     * If operation is successful, this will
+				     * be updated with the number of returned
+				     * data in word. one word == 4 bytes.
+				     */
+
+	u32	command_id:15;
+	u32	reply:1;            /* The device will set this flag once
+				     * the operation is complete.
+				     */
+	u32	app_module_id;
+	u32	data[CX2092X_CMD_SIZE]; /* Used for storing parameters and
+					 * receiving the returned data from
+					 * device.
+					 */
+};
+
+/* codec private data*/
+struct cx2092x_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	int gpio_reset;
+	struct cx2092x_cmd cmd;
+	int cmd_res;
+};
+
+/*
+ * This functions takes cx2092x_cmd structure as input and output parameters
+ * to communicate CX2092X. If operation is successfully, it returns number of
+ * returned data and stored the returned data in "cmd->data" array.
+ * Otherwise, it returns the error code.
+ */
+static int cx2092x_sendcmd(struct snd_soc_codec *codec,
+			   struct cx2092x_cmd *cmd)
+{
+	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
+	int ret = 0;
+	int num_32b_words = cmd->num_32b_words;
+	unsigned long time_out;
+	u32 *i2c_data = (u32 *)cmd;
+	int size = num_32b_words + 2;
+
+	/* calculate how many WORD that will be wrote to device*/
+	cmd->num_32b_words = cmd->command_id & CX2092X_CMD_GET(0) ?
+			     CX2092X_CMD_SIZE : num_32b_words;
+
+
+	/* write all command data except fo frist 4 bytes*/
+	ret = regmap_bulk_write(cx2092x->regmap, 4, &i2c_data[1], size - 1);
+	if (ret < 0) {
+		dev_err(cx2092x->dev, "Failed to write command data\n");
+		goto LEAVE;
+	}
+
+	/* write first 4 bytes command data*/
+	ret = regmap_bulk_write(cx2092x->regmap, 0, i2c_data, 1);
+	if (ret < 0) {
+		dev_err(cx2092x->dev, "Failed to write command\n");
+		goto LEAVE;
+	}
+
+	/* continuously read the first bytes data from device until
+	 * either timeout or the flag 'reply' is set.
+	 */
+	time_out = msecs_to_jiffies(2000);
+	time_out += jiffies;
+	do {
+		regmap_bulk_read(cx2092x->regmap, 0, &i2c_data[0], 1);
+		if (cmd->reply == 1)
+			break;
+		mdelay(10);
+
+	} while (!time_after(jiffies, time_out));
+
+	if (cmd->reply == 1) {
+		/* check if there is returned data. If yes copy the returned
+		 * data to cmd->data array
+		 */
+		if (cmd->num_32b_words > 0)
+			regmap_bulk_read(cx2092x->regmap, 8, &i2c_data[2],
+					 cmd->num_32b_words);
+		/* return error code if operation is not successful.*/
+		else if (cmd->num_32b_words < 0)
+			dev_err(cx2092x->dev, "SendCmd failed, err = %d\n",
+				cmd->num_32b_words);
+
+		ret = cmd->num_32b_words;
+	} else {
+		dev_err(cx2092x->dev, "SendCmd timeout\n");
+		ret = -EBUSY;
+	}
+
+LEAVE:
+	return ret;
+}
+
+
+static int cmd_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = sizeof(struct cx2092x_cmd);
+
+	return 0;
+}
+
+static int cmd_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct cx2092x_priv *cx2092x =
+		snd_soc_component_get_drvdata(component);
+
+	memcpy(ucontrol->value.bytes.data, &cx2092x->cmd,
+			sizeof(cx2092x->cmd));
+
+	return 0;
+}
+
+static int cmd_put(struct snd_kcontrol *kcontrol,
+		   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct cx2092x_priv *cx2092x = snd_soc_component_get_drvdata(component);
+	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
+
+	memcpy(&cx2092x->cmd, ucontrol->value.bytes.data,
+			sizeof(cx2092x->cmd));
+
+	cx2092x->cmd_res = cx2092x_sendcmd(codec, &cx2092x->cmd);
+
+	if (cx2092x->cmd_res < 0)
+		dev_err(codec->dev, "Failed to send cmd, ret = %d\n",
+			cx2092x->cmd_res);
+
+	return cx2092x->cmd_res < 0 ? cx2092x->cmd_res : 0;
+}
+
+
+static int mode_info(struct snd_kcontrol *kcontrol,
+		     struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = 4;
+
+	return 0;
+}
+
+static int mode_get(struct snd_kcontrol *kcontrol,
+		    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
+	struct cx2092x_cmd cmd;
+	int ret = 0;
+
+	cmd.command_id = 0x12f; /*CX2092X_CMD_GET(SOS_RESOURCE);*/
+	cmd.reply = 0;
+	cmd.app_module_id = CX2092X_CAPE_ID('S', 'O', 'S', ' ');
+	cmd.num_32b_words = 1;
+	cmd.data[0] = CX2092X_CAPE_ID('C', 'T', 'R', 'L');
+
+	ret = cx2092x_sendcmd(codec, &cmd);
+	if (ret <= 0)
+		dev_err(codec->dev, "Failed to get current mode, ret = %d\n",
+			ret);
+	else {
+		ucontrol->value.bytes.data[0] = CX2092X_ID2CH_A(cmd.data[0]);
+		ucontrol->value.bytes.data[1] = CX2092X_ID2CH_B(cmd.data[0]);
+		ucontrol->value.bytes.data[2] = CX2092X_ID2CH_C(cmd.data[0]);
+		ucontrol->value.bytes.data[3] = CX2092X_ID2CH_D(cmd.data[0]);
+
+		dev_dbg(codec->dev, "Current mode = %c%c%c%c\n",
+			ucontrol->value.bytes.data[0],
+			ucontrol->value.bytes.data[1],
+			ucontrol->value.bytes.data[2],
+			ucontrol->value.bytes.data[3]);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int mode_put(struct snd_kcontrol *kcontrol,
+		    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
+	struct cx2092x_cmd cmd;
+	int ret = -1;
+
+	cmd.command_id = 4;
+	cmd.reply = 0;
+	cmd.app_module_id = CX2092X_CAPE_ID('C', 'T', 'R', 'L');
+	cmd.num_32b_words = 1;
+	cmd.data[0] = CX2092X_CAPE_ID(ucontrol->value.bytes.data[0],
+				      ucontrol->value.bytes.data[1],
+				      ucontrol->value.bytes.data[2],
+				      ucontrol->value.bytes.data[3]);
+
+	ret = cx2092x_sendcmd(codec, &cmd);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set mode, ret =%d\n", ret);
+	} else {
+		dev_dbg(codec->dev, "Set mode successfully, ret = %d\n", ret);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static const struct snd_kcontrol_new cx2092x_snd_controls[] = {
+	CX2092X_CONTROL("SendCmd", cmd_info, cmd_get, cmd_put,
+		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE),
+	CX2092X_CONTROL("Mode", mode_info, mode_get, mode_put,
+		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE),
+};
+
+
+static const struct snd_soc_dapm_widget cx2092x_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_OUT("Mic AIF", "Capture", 0,
+			     SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_INPUT("MIC"),
+};
+
+static const struct snd_soc_dapm_route cx2092x_intercon[] = {
+	{"Mic AIF", NULL, "MIC"},
+};
+
+
+static struct snd_soc_dai_driver soc_codec_cx2092x_dai[] = {
+	{
+		.name = "cx2092x-aif",
+		.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = CX2092X_FORMATS,
+		},
+	},
+	{
+		.name = "cx2092x-dsp",
+		.capture = {
+		.stream_name = "AEC Ref",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = CX2092X_FORMATS,
+		},
+	},
+};
+
+static int cx2092x_reset(struct snd_soc_codec *codec)
+{
+	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
+
+	if (gpio_is_valid(cx2092x->gpio_reset)) {
+		gpio_set_value(cx2092x->gpio_reset, 0);
+		mdelay(10);
+		gpio_set_value(cx2092x->gpio_reset, 1);
+	}
+
+	return 0;
+}
+
+const struct of_device_id cx2092x_dt_ids[] = {
+	{ .compatible = "cnxt,cx20921", },
+	{ .compatible = "cnxt,cx20924", },
+	{ }
+};
+EXPORT_SYMBOL_GPL(cx2092x_dt_ids);
+MODULE_DEVICE_TABLE(of, cx2092x_dt_ids);
+
+static int cx2092x_probe(struct snd_soc_codec *codec)
+{
+	return cx2092x_reset(codec);
+}
+
+static int cx2092x_remove(struct snd_soc_codec *codec)
+{
+	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
+
+	if (gpio_is_valid(cx2092x->gpio_reset))
+		/* Set codec to the reset state */
+		gpio_set_value(cx2092x->gpio_reset, 0);
+
+	return 0;
+}
+
+
+static struct snd_soc_codec_driver soc_codec_driver_cx2092x = {
+	.probe = cx2092x_probe,
+	.remove = cx2092x_remove,
+
+	.component_driver = {
+		.controls = cx2092x_snd_controls,
+		.num_controls = ARRAY_SIZE(cx2092x_snd_controls),
+		.dapm_widgets = cx2092x_dapm_widgets,
+		.num_dapm_widgets = ARRAY_SIZE(cx2092x_dapm_widgets),
+		.dapm_routes = cx2092x_intercon,
+		.num_dapm_routes = ARRAY_SIZE(cx2092x_intercon),
+	},
+};
+EXPORT_SYMBOL_GPL(soc_codec_driver_cx2092x);
+
+static bool cx2092x_volatile_register(struct device *dev, unsigned int reg)
+{
+	return true; /*all register are volatile*/
+}
+
+const struct regmap_config cx2092x_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = CX2092X_REG_MAX,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = cx2092x_volatile_register,
+	.val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+EXPORT_SYMBOL_GPL(cx2092x_regmap_config);
+
+int cx2092x_dev_probe(struct device *dev, struct regmap *regmap)
+{
+	struct cx2092x_priv *cx2092x;
+	int ret;
+
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	cx2092x = devm_kzalloc(dev, sizeof(*cx2092x), GFP_KERNEL);
+	if (!cx2092x)
+		return -ENOMEM;
+
+	if (of_match_device(cx2092x_dt_ids, dev))
+		cx2092x->gpio_reset =
+			of_get_named_gpio(dev->of_node, "reset-gpio", 0);
+
+	if (gpio_is_valid(cx2092x->gpio_reset)) {
+		int ret;
+
+		ret = devm_gpio_request(dev, cx2092x->gpio_reset,
+					"CX2092X Reset");
+		if (ret < 0)
+			return ret;
+	}
+
+	dev_set_drvdata(dev, cx2092x);
+	cx2092x->regmap = regmap;
+	cx2092x->dev = dev;
+
+	ret = snd_soc_register_codec(cx2092x->dev, &soc_codec_driver_cx2092x,
+				soc_codec_cx2092x_dai,
+				ARRAY_SIZE(soc_codec_cx2092x_dai));
+	if (ret < 0)
+		dev_err(dev, "Failed to register codec: %d\n", ret);
+	else
+		dev_dbg(dev, "%s: Register codec.\n", __func__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cx2092x_dev_probe);
+
+MODULE_DESCRIPTION("ASoC CX2092X ALSA SoC Driver");
+MODULE_AUTHOR("Simon Ho <simon.ho@conexant.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/cx2092x.h b/sound/soc/codecs/cx2092x.h
new file mode 100644
index 0000000..9577be8
--- /dev/null
+++ b/sound/soc/codecs/cx2092x.h
@@ -0,0 +1,26 @@ 
+/*
+ * cx2092x.h -- CX20921 and CX20924 Audio driver
+ *
+ * Copyright:   (C) 2017 Conexant Systems, Inc.
+ *
+ * This is based on Alexander Sverdlin's CS4271 driver code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __CX2092X_PRIV_H__
+#define __CX2092X_PRIV_H__
+
+#include <linux/regmap.h>
+
+extern const struct of_device_id cx2092x_dt_ids[];
+extern const struct regmap_config cx2092x_regmap_config;
+
+int cx2092x_dev_probe(struct device *dev, struct regmap *regmap);
+
+#define CX2092X_REG_MAX 0x2000
+
+#endif