diff mbox

[v2,02/18] mfd: madera: Add common support for Cirrus Logic Madera codecs

Message ID 1493050124-5970-3-git-send-email-rf@opensource.wolfsonmicro.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Fitzgerald April 24, 2017, 4:08 p.m. UTC
This adds the generic core support for Cirrus Logic "Madera" class codecs.
These are complex audio codec SoCs with a variety of digital and analogue
I/O, onboard audio processing and DSPs, and other features.

These codecs are all based off a common set of hardware IP so can be
supported by a core of common code (with a few minor device-to-device
variations).


Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
Changes since V1:
- Moved dt binding into separate patch
- Fixed some errors with Kconfig options and select MADERA_IRQ directly
  from MFD
- Added custom parent supply information, mainly for re-using the Arizona
  regulators (which don't have their own DT node)
- re-ordered the error test and debug print in madera_wait_for_boot()
- re-worked the initialization of the reset gpio configuration from probe
- renamed madera_of_get_type() to madera_get_type_from_of() to make its
  purpose clearer
- removed reading of MICBIAS configuration
- ordered includes alphabetically
- added a header comment that struct madera is internal
- fixed pdata comments to be kerneldoc format

 MAINTAINERS                      |   3 +
 drivers/mfd/Kconfig              |  29 ++
 drivers/mfd/Makefile             |   4 +
 drivers/mfd/madera-core.c        | 635 +++++++++++++++++++++++++++++++++++++++
 drivers/mfd/madera-i2c.c         | 131 ++++++++
 drivers/mfd/madera-spi.c         | 132 ++++++++
 drivers/mfd/madera.h             |  52 ++++
 include/linux/mfd/madera/core.h  | 180 +++++++++++
 include/linux/mfd/madera/pdata.h |  61 ++++
 9 files changed, 1227 insertions(+)
 create mode 100644 drivers/mfd/madera-core.c
 create mode 100644 drivers/mfd/madera-i2c.c
 create mode 100644 drivers/mfd/madera-spi.c
 create mode 100644 drivers/mfd/madera.h
 create mode 100644 include/linux/mfd/madera/core.h
 create mode 100644 include/linux/mfd/madera/pdata.h

Comments

Lee Jones May 22, 2017, 5:39 p.m. UTC | #1
On Mon, 24 Apr 2017, Richard Fitzgerald wrote:

> This adds the generic core support for Cirrus Logic "Madera" class codecs.
> These are complex audio codec SoCs with a variety of digital and analogue
> I/O, onboard audio processing and DSPs, and other features.
> 
> These codecs are all based off a common set of hardware IP so can be
> supported by a core of common code (with a few minor device-to-device
> variations).
> 
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com>
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
> Changes since V1:
> - Moved dt binding into separate patch
> - Fixed some errors with Kconfig options and select MADERA_IRQ directly
>   from MFD
> - Added custom parent supply information, mainly for re-using the Arizona
>   regulators (which don't have their own DT node)
> - re-ordered the error test and debug print in madera_wait_for_boot()
> - re-worked the initialization of the reset gpio configuration from probe
> - renamed madera_of_get_type() to madera_get_type_from_of() to make its
>   purpose clearer
> - removed reading of MICBIAS configuration
> - ordered includes alphabetically
> - added a header comment that struct madera is internal
> - fixed pdata comments to be kerneldoc format
> 
>  MAINTAINERS                      |   3 +
>  drivers/mfd/Kconfig              |  29 ++
>  drivers/mfd/Makefile             |   4 +
>  drivers/mfd/madera-core.c        | 635 +++++++++++++++++++++++++++++++++++++++
>  drivers/mfd/madera-i2c.c         | 131 ++++++++
>  drivers/mfd/madera-spi.c         | 132 ++++++++
>  drivers/mfd/madera.h             |  52 ++++
>  include/linux/mfd/madera/core.h  | 180 +++++++++++
>  include/linux/mfd/madera/pdata.h |  61 ++++
>  9 files changed, 1227 insertions(+)
>  create mode 100644 drivers/mfd/madera-core.c
>  create mode 100644 drivers/mfd/madera-i2c.c
>  create mode 100644 drivers/mfd/madera-spi.c
>  create mode 100644 drivers/mfd/madera.h
>  create mode 100644 include/linux/mfd/madera/core.h
>  create mode 100644 include/linux/mfd/madera/pdata.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e07159..4a01a2a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3304,7 +3304,10 @@ L:	patches@opensource.wolfsonmicro.com
>  T:	git https://github.com/CirrusLogic/linux-drivers.git
>  W:	https://github.com/CirrusLogic/linux-drivers/wiki
>  S:	Supported
> +F:	Documentation/devicetree/bindings/mfd/madera.txt
>  F:	include/linux/mfd/madera/*
> +F:	drivers/mfd/madera*
> +F:	drivers/mfd/cs47l*
>  
>  CLEANCACHE API
>  M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..8128aaa 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -203,6 +203,35 @@ config MFD_CROS_EC_SPI
>  	  response time cannot be guaranteed, we support ignoring
>  	  'pre-amble' bytes before the response actually starts.
>  
> +config MFD_MADERA
> +	bool
> +
> +config MFD_MADERA_I2C
> +	bool "Cirrus Logic Madera codecs with I2C"
> +	select REGMAP
> +	select REGMAP_IRQ
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	select MFD_MADERA
> +	select MADERA_IRQ
> +	depends on I2C
> +	help
> +	  Support for the Cirrus Logic Madera platform audio SoC
> +	  core functionality controlled via I2C.
> +
> +config MFD_MADERA_SPI
> +	bool "Cirrus Logic Madera codecs with SPI"
> +	select REGMAP
> +	select REGMAP_IRQ
> +	select MFD_CORE
> +	select REGMAP_SPI
> +	select MFD_MADERA
> +	select MADERA_IRQ
> +	depends on SPI_MASTER

Suggest that you move all duplicates/common selects to MFD_MADERA.

And reorder them logically.

> +	help
> +	  Support for the Cirrus Logic Madera platform audio SoC
> +	  core functionality controlled via SPI.
> +
>  config MFD_ASIC3
>  	bool "Compaq ASIC3"
>  	depends on GPIOLIB && ARM
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..38b1514 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -72,6 +72,10 @@ obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
>  wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
>  obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
>  
> +obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
> +obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
> +obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
> +
>  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
>  obj-$(CONFIG_TPS65010)		+= tps65010.o
>  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
> new file mode 100644
> index 0000000..bed018d
> --- /dev/null
> +++ b/drivers/mfd/madera-core.c
> @@ -0,0 +1,635 @@
> +/*
> + * Core MFD support for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#include <linux/mfd/madera/core.h>
> +#include <linux/mfd/madera/registers.h>
> +
> +#include "madera.h"
> +
> +#define CS47L35_SILICON_ID	0x6360
> +#define CS47L85_SILICON_ID	0x6338
> +#define CS47L90_SILICON_ID	0x6364
> +
> +#define MADERA_32KZ_MCLK2	1
> +
> +static const char * const madera_core_supplies[] = {
> +	"AVDD",
> +	"DBVDD1",
> +};
> +
> +static const struct mfd_cell madera_ldo1_devs[] = {
> +	{ .name = "madera-ldo1" },
> +};
> +
> +static const char * const cs47l35_supplies[] = {
> +	"MICVDD",
> +	"DBVDD2",
> +	"CPVDD1",
> +	"CPVDD2",
> +	"SPKVDD",
> +};
> +
> +static const struct mfd_cell cs47l35_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },
> +	{ .name = "madera-micsupp", },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },

Place all the multi-attribute structs on separate lines.

Like this:

> +	{
> +		.name = "cs47l35-codec",
> +		.of_compatible = "cirrus,cs47l35-codec",
> +		.parent_supplies = cs47l35_supplies,
> +		.num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
> +	},
> +};
> +
> +static const char * const cs47l85_supplies[] = {
> +	"MICVDD",
> +	"DBVDD2",
> +	"DBVDD3",
> +	"DBVDD4",
> +	"CPVDD1",
> +	"CPVDD2",
> +	"SPKVDDL",
> +	"SPKVDDR",
> +};
> +
> +static const struct mfd_cell cs47l85_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },
> +	{ .name = "madera-micsupp" },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },

As above.

> +	{
> +		.name = "cs47l85-codec",
> +		.of_compatible = "cirrus,cs47l85-codec",
> +		.parent_supplies = cs47l85_supplies,
> +		.num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
> +	},
> +};
> +
> +static const char * const cs47l90_supplies[] = {
> +	"MICVDD",
> +	"DBVDD2",
> +	"DBVDD3",
> +	"DBVDD4",
> +	"CPVDD1",
> +	"CPVDD2",
> +};
> +
> +static const struct mfd_cell cs47l90_devs[] = {
> +	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
> +	{ .name = "madera-irq", },
> +	{ .name = "madera-micsupp", },
> +	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
> +	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },

As above.

> +	{
> +		.name = "cs47l90-codec",
> +		 .of_compatible = "cirrus,cs47l90-codec",
> +		.parent_supplies = cs47l90_supplies,
> +		.num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
> +	},
> +};
> +
> +const char *madera_name_from_type(enum madera_type type)
> +{
> +	switch (type) {
> +	case CS47L35:
> +		return "CS47L35";
> +	case CS47L85:
> +		return "CS47L85";
> +	case CS47L90:
> +		return "CS47L90";
> +	case CS47L91:
> +		return "CS47L91";
> +	case WM1840:
> +		return "WM1840";
> +	default:
> +		return "Unknown";
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_name_from_type);
> +
> +#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
> +#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
> +
> +static int madera_wait_for_boot(struct madera *madera)
> +{
> +	unsigned int val;
> +	int ret;
> +
> +	/*
> +	 * We can't use an interrupt as we need to runtime resume to do so,
> +	 * so we poll the status bit. This won't race with the interrupt
> +	 * handler because it will be blocked on runtime resume.
> +	 */
> +	ret = regmap_read_poll_timeout(madera->regmap,
> +				       MADERA_IRQ1_RAW_STATUS_1,
> +				       val,
> +				       (val & MADERA_BOOT_DONE_STS1),
> +				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
> +				       MADERA_BOOT_POLL_TIMEOUT_US);
> +
> +	if (ret)
> +		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
> +
> +	/*
> +	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
> +	 * Do this unconditionally to avoid interrupt storms
> +	 */
> +	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
> +		     MADERA_BOOT_DONE_EINT1);
> +
> +	pm_runtime_mark_last_busy(madera->dev);
> +
> +	return ret;
> +}
> +
> +static int madera_soft_reset(struct madera *madera)
> +{
> +	int ret;
> +
> +	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
> +	if (ret != 0) {

if (!ret)

> +		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* Allow time for internal clocks to startup after reset */
> +	usleep_range(1000, 2000);

Are these timing from the datasheet?

If so, it's sometimes useful to quote it.

> +	return 0;
> +}
> +
> +static void madera_enable_hard_reset(struct madera *madera)
> +{
> +	if (madera->reset_gpio)
> +		gpiod_set_value_cansleep(madera->reset_gpio, 0);
> +}
> +
> +static void madera_disable_hard_reset(struct madera *madera)
> +{
> +	if (madera->reset_gpio) {
> +		gpiod_set_value_cansleep(madera->reset_gpio, 1);
> +		usleep_range(1000, 2000);
> +	}
> +}
> +
> +#ifdef CONFIG_PM
> +static int madera_runtime_resume(struct device *dev)
> +{
> +	struct madera *madera = dev_get_drvdata(dev);
> +	int ret;
> +
> +	dev_dbg(dev, "Leaving sleep mode\n");
> +
> +	ret = regulator_enable(madera->dcvdd);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> +		return ret;
> +	}
> +
> +	regcache_cache_only(madera->regmap, false);
> +	regcache_cache_only(madera->regmap_32bit, false);
> +
> +	ret = madera_wait_for_boot(madera);
> +	if (ret)
> +		goto err;
> +
> +	ret = regcache_sync(madera->regmap);
> +	if (ret) {
> +		dev_err(dev, "Failed to restore 16-bit register cache\n");
> +		goto err;
> +	}
> +
> +	ret = regcache_sync(madera->regmap_32bit);
> +	if (ret) {
> +		dev_err(dev, "Failed to restore 32-bit register cache\n");
> +		goto err;
> +	}
> +
> +	return 0;
> +
> +err:
> +	regcache_cache_only(madera->regmap_32bit, true);
> +	regcache_cache_only(madera->regmap, true);
> +	regulator_disable(madera->dcvdd);
> +
> +	return ret;
> +}
> +
> +static int madera_runtime_suspend(struct device *dev)
> +{
> +	struct madera *madera = dev_get_drvdata(dev);
> +
> +	dev_dbg(madera->dev, "Entering sleep mode\n");
> +
> +	regcache_cache_only(madera->regmap, true);
> +	regcache_mark_dirty(madera->regmap);
> +	regcache_cache_only(madera->regmap_32bit, true);
> +	regcache_mark_dirty(madera->regmap_32bit);
> +
> +	regulator_disable(madera->dcvdd);
> +
> +	return 0;
> +}
> +#endif
> +
> +const struct dev_pm_ops madera_pm_ops = {
> +	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
> +			   madera_runtime_resume,
> +			   NULL)
> +};
> +EXPORT_SYMBOL_GPL(madera_pm_ops);

Why aren't you using the helper MACRO which avoids having to declare
the struct?

> +unsigned int madera_get_num_micbias(struct madera *madera)
> +{
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +		return 2;
> +	case CS47L85:
> +	case WM1840:
> +		return 4;
> +	case CS47L90:
> +	case CS47L91:
> +		return 2;
> +	default:
> +		dev_warn(madera->dev, "No micbias known for codec %s\n",
> +			 madera_name_from_type(madera->type));
> +		return 0;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_get_num_micbias);

The magic numbers in this function need defining.

> +unsigned int madera_get_num_childbias(struct madera *madera,
> +				      unsigned int micbias)
> +{
> +	/*
> +	 * micbias argument reserved for future codecs that don't
> +	 * have the same number of children on each micbias
> +	 */
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +		return 2;
> +	case CS47L85:
> +	case WM1840:
> +		return 0;
> +	case CS47L90:
> +	case CS47L91:
> +		return 4;
> +	default:
> +		dev_warn(madera->dev, "No child micbias known for codec %s\n",
> +			 madera_name_from_type(madera->type));
> +		return 0;
> +	}
> +}
> +EXPORT_SYMBOL_GPL(madera_get_num_childbias);

As above.

> +#ifdef CONFIG_OF
> +const struct of_device_id madera_of_match[] = {
> +	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
> +	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
> +	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
> +	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
> +	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
> +	{},
> +};
> +EXPORT_SYMBOL_GPL(madera_of_match);
> +
> +unsigned long madera_get_type_from_of(struct device *dev)
> +{
> +	const struct of_device_id *id = of_match_device(madera_of_match, dev);
> +
> +	if (id)
> +		return (unsigned long)id->data;
> +	else
> +		return 0;
> +}
> +EXPORT_SYMBOL_GPL(madera_get_type_from_of);
> +#endif
> +
> +static int madera_get_reset_gpio(struct madera *madera)
> +{
> +	int ret;
> +
> +	/* We use 0 in pdata to indicate a GPIO has not been set */
> +	if (dev_get_platdata(madera->dev) && (madera->pdata.reset > 0)) {

Once you have a copy of pdata in your local struct, just use that
instead - like you do below.

> +		/* Start out with /RESET asserted */
> +		ret = devm_gpio_request_one(madera->dev,
> +					    madera->pdata.reset,
> +					    GPIOF_DIR_OUT | GPIOF_INIT_LOW,
> +					    "madera reset");
> +		if (!ret)
> +			madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
> +	} else {
> +		madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
> +							     "reset",
> +							     GPIOD_OUT_LOW);
> +		if (IS_ERR(madera->reset_gpio))
> +			ret = PTR_ERR(madera->reset_gpio);
> +		else
> +			ret = 0;
> +	}
> +
> +	if (ret == -EPROBE_DEFER)
> +		return ret;
> +
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to request /RESET: %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!madera->reset_gpio)
> +		dev_warn(madera->dev,
> +			 "Running without reset GPIO is not recommended\n");
> +
> +	return 0;
> +}

This function needs a rethink.

Can you please explain what's happening here in simple terms please?

> +int madera_dev_init(struct madera *madera)
> +{
> +	struct device *dev = madera->dev;
> +	const char *name;
> +	unsigned int hwid;
> +	int (*patch_fn)(struct madera *) = NULL;
> +	const struct mfd_cell *mfd_devs;
> +	int n_devs = 0;
> +	int i, ret;
> +
> +	dev_set_drvdata(madera->dev, madera);
> +	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
> +
> +	if (dev_get_platdata(madera->dev)) {
> +		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
> +		       sizeof(madera->pdata));

Why are you copying the whole of pdata?  Either take what you need
from it and place it in this device's struct or use dev->pdata directly.

> +	}
> +
> +	ret = madera_get_reset_gpio(madera);
> +	if (ret)
> +		return ret;
> +
> +	regcache_cache_only(madera->regmap, true);
> +	regcache_cache_only(madera->regmap_32bit, true);
> +
> +	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
> +		madera->core_supplies[i].supply = madera_core_supplies[i];
> +
> +	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
> +
> +	switch (madera->type) {
> +	case CS47L35:
> +	case CS47L90:
> +	case CS47L91:
> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		/* On these DCVDD could be supplied from the onboard LDO1 */
> +		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> +				      madera_ldo1_devs,
> +				      ARRAY_SIZE(madera_ldo1_devs),
> +				      NULL, 0, NULL);
> +		if (ret) {
> +			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
> +			return ret;
> +		}
> +		break;
> +	default:
> +		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
> +		return -ENODEV;
> +	}
> +
> +	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
> +				      madera->core_supplies);
> +	if (ret) {
> +		dev_err(dev, "Failed to request core supplies: %d\n", ret);
> +		goto err_devs;
> +	}
> +
> +	/*
> +	 * Don't use devres here because the only device we have to get
> +	 * against is the MFD device and DCVDD will likely be supplied by
> +	 * one of its children. Meaning that the regulator will be
> +	 * destroyed by the time devres calls regulator put.
> +	 */
> +	madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
> +	if (IS_ERR(madera->dcvdd)) {
> +		ret = PTR_ERR(madera->dcvdd);
> +		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
> +		goto err_devs;
> +	}
> +
> +	ret = regulator_bulk_enable(madera->num_core_supplies,
> +				    madera->core_supplies);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
> +		goto err_dcvdd;
> +	}
> +
> +	ret = regulator_enable(madera->dcvdd);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> +		goto err_enable;
> +	}
> +
> +	madera_disable_hard_reset(madera);
> +
> +	regcache_cache_only(madera->regmap, false);
> +	regcache_cache_only(madera->regmap_32bit, false);
> +
> +	/*
> +	 * Verify that this is a chip we know about before we
> +	 * starting doing any writes to its registers
> +	 */
> +	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
> +	if (ret) {
> +		dev_err(dev, "Failed to read ID register: %d\n", ret);
> +		goto err_reset;
> +	}

If you can do this then what is the point of supplying the IDs via DT?

> +	switch (hwid) {
> +	case CS47L35_SILICON_ID:
> +	case CS47L85_SILICON_ID:
> +	case CS47L90_SILICON_ID:
> +		break;
> +	default:
> +		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
> +		ret = -EINVAL;
> +		goto err_reset;
> +	}
> +
> +	/* If we don't have a reset GPIO use a soft reset */
> +	if (!madera->reset_gpio) {
> +		ret = madera_soft_reset(madera);
> +		if (ret)
> +			goto err_reset;
> +	}
> +
> +	ret = madera_wait_for_boot(madera);
> +	if (ret) {
> +		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
> +		goto err_reset;
> +	}
> +
> +	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
> +			  &madera->rev);
> +	if (ret) {
> +		dev_err(dev, "Failed to read revision register: %d\n", ret);
> +		goto err_reset;
> +	}
> +	madera->rev &= MADERA_HW_REVISION_MASK;
> +
> +	name = madera_name_from_type(madera->type);
> +
> +	switch (hwid) {
> +	case CS47L35_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			switch (madera->type) {
> +			case CS47L35:
> +				patch_fn = cs47l35_patch;
> +				mfd_devs = cs47l35_devs;
> +				n_devs = ARRAY_SIZE(cs47l35_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	case CS47L85_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			switch (madera->type) {
> +			case CS47L85:
> +			case WM1840:
> +				patch_fn = cs47l85_patch;
> +				mfd_devs = cs47l85_devs;
> +				n_devs = ARRAY_SIZE(cs47l85_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	case CS47L90_SILICON_ID:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			switch (madera->type) {
> +			case CS47L90:
> +			case CS47L91:
> +				patch_fn = cs47l90_patch;
> +				mfd_devs = cs47l90_devs;
> +				n_devs = ARRAY_SIZE(cs47l90_devs);
> +				break;
> +			default:
> +				break;
> +			}
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (!n_devs) {
> +		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
> +		ret = -ENODEV;
> +		goto err_reset;
> +	}
> +
> +	dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
> +
> +	/* Apply hardware patch */
> +	if (patch_fn) {
> +		ret = patch_fn(madera);
> +		if (ret) {
> +			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
> +			goto err_reset;
> +		}
> +	}

What does the HW patch do exactly?

> +	/* Init 32k clock sourced from MCLK2 */
> +	ret = regmap_update_bits(madera->regmap,
> +			MADERA_CLOCK_32K_1,
> +			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
> +			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
> +		goto err_reset;
> +	}
> +
> +	pm_runtime_set_active(madera->dev);
> +	pm_runtime_enable(madera->dev);
> +	pm_runtime_set_autosuspend_delay(madera->dev, 100);
> +	pm_runtime_use_autosuspend(madera->dev);
> +
> +	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> +			      mfd_devs, n_devs,
> +			      NULL, 0, NULL);
> +	if (ret) {
> +		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
> +		goto err_pm_runtime;
> +	}
> +
> +	return 0;
> +
> +err_pm_runtime:
> +	pm_runtime_disable(madera->dev);
> +err_reset:
> +	madera_enable_hard_reset(madera);
> +	regulator_disable(madera->dcvdd);
> +err_enable:
> +	regulator_bulk_disable(madera->num_core_supplies,
> +			       madera->core_supplies);
> +err_dcvdd:
> +	regulator_put(madera->dcvdd);
> +err_devs:
> +	mfd_remove_devices(dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_init);
> +
> +int madera_dev_exit(struct madera *madera)
> +{
> +	/* Prevent any IRQs being serviced while we clean up */
> +	disable_irq(madera->irq);
> +
> +	/*
> +	 * DCVDD could be supplied by a child node, we must disable it before
> +	 * removing the children, and prevent PM runtime from turning it back on
> +	 */
> +	pm_runtime_disable(madera->dev);
> +
> +	regulator_disable(madera->dcvdd);
> +	regulator_put(madera->dcvdd);
> +
> +	mfd_remove_devices(madera->dev);
> +	madera_enable_hard_reset(madera);
> +
> +	regulator_bulk_disable(madera->num_core_supplies,
> +			       madera->core_supplies);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_exit);
> diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
> new file mode 100644
> index 0000000..20e4cd4
> --- /dev/null
> +++ b/drivers/mfd/madera-i2c.c
> @@ -0,0 +1,131 @@
> +/*
> + * I2C bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>

These should be alphabetical.

> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_i2c_probe(struct i2c_client *i2c,
> +			    const struct i2c_device_id *id)
> +{
> +	struct madera *madera;
> +	const struct regmap_config *regmap_16bit_config = NULL;
> +	const struct regmap_config *regmap_32bit_config = NULL;
> +	unsigned long type;
> +	int ret;
> +
> +	if (i2c->dev.of_node)
> +		type = madera_get_type_from_of(&i2c->dev);
> +	else
> +		type = id->driver_data;
> +
> +	switch (type) {
> +	case CS47L35:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
> +		}
> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
> +		}
> +		break;
> +	case CS47L90:
> +	case CS47L91:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
> +			regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
> +		}
> +		break;
> +	default:
> +		dev_err(&i2c->dev,
> +			"Unknown Madera I2C device type %ld\n", type);
> +		return -EINVAL;
> +	}
> +
> +	if (!regmap_16bit_config) {
> +		dev_err(&i2c->dev,
> +			"Kernel does not include support for %s\n",
> +			madera_name_from_type(type));
> +		return -EINVAL;
> +	}
> +
> +	madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
> +	if (!madera)
> +		return -ENOMEM;
> +
> +	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
> +	if (IS_ERR(madera->regmap)) {
> +		ret = PTR_ERR(madera->regmap);
> +		dev_err(&i2c->dev,
> +			"Failed to allocate 16-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
> +	if (IS_ERR(madera->regmap_32bit)) {
> +		ret = PTR_ERR(madera->regmap_32bit);
> +		dev_err(&i2c->dev,
> +			"Failed to allocate 32-bit register map: %d\n", ret);
> +		return ret;
> +	}
> +
> +	madera->type = type;
> +	madera->dev = &i2c->dev;
> +	madera->irq = i2c->irq;
> +
> +	return madera_dev_init(madera);
> +}
> +
> +static int madera_i2c_remove(struct i2c_client *i2c)
> +{
> +	struct madera *madera = dev_get_drvdata(&i2c->dev);
> +
> +	madera_dev_exit(madera);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id madera_i2c_id[] = {
> +	{ "cs47l35", CS47L35 },
> +	{ "cs47l85", CS47L85 },
> +	{ "cs47l90", CS47L90 },
> +	{ "cs47l91", CS47L91 },
> +	{ "wm1840", WM1840 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
> +
> +static struct i2c_driver madera_i2c_driver = {
> +	.driver = {
> +		.name	= "madera",
> +		.pm	= &madera_pm_ops,
> +		.of_match_table	= of_match_ptr(madera_of_match),
> +	},
> +	.probe		= madera_i2c_probe,
> +	.remove		= madera_i2c_remove,
> +	.id_table	= madera_i2c_id,
> +};
> +
> +module_i2c_driver(madera_i2c_driver);
> +
> +MODULE_DESCRIPTION("Madera I2C bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.wolfsonmicro.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
> new file mode 100644
> index 0000000..375bb36
> --- /dev/null
> +++ b/drivers/mfd/madera-spi.c
> @@ -0,0 +1,132 @@
> +/*
> + * SPI bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +#include <linux/spi/spi.h>

Alphabetical.

> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_spi_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +	struct madera *madera;
> +	const struct regmap_config *regmap_16bit_config = NULL;
> +	const struct regmap_config *regmap_32bit_config = NULL;
> +	unsigned long type;
> +	int ret;
> +
> +	if (spi->dev.of_node)
> +		type = madera_get_type_from_of(&spi->dev);
> +	else
> +		type = id->driver_data;

You should probe the device for this.

> +	switch (type) {
> +	case CS47L35:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> +			regmap_16bit_config = &cs47l35_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l35_32bit_spi_regmap;
> +		}
> +		break;
> +	case CS47L85:
> +	case WM1840:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> +			regmap_16bit_config = &cs47l85_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l85_32bit_spi_regmap;
> +		}
> +		break;
> +	case CS47L90:
> +	case CS47L91:
> +		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> +			regmap_16bit_config = &cs47l90_16bit_spi_regmap;
> +			regmap_32bit_config = &cs47l90_32bit_spi_regmap;
> +		}
> +		break;
> +	default:
> +		dev_err(&spi->dev,
> +			"Unknown Madera SPI device type %ld\n", type);
> +		return -EINVAL;
> +	}
> +
> +	if (!regmap_16bit_config) {
> +		dev_err(&spi->dev,
> +			"Kernel does not include support for %s\n",
> +			madera_name_from_type(type));
> +		return -EINVAL;

-ENODEV?

> +	}
> +
> +	madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
> +	if (!madera)
> +		return -ENOMEM;
> +
> +	madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
> +	if (IS_ERR(madera->regmap)) {
> +		ret = PTR_ERR(madera->regmap);
> +		dev_err(&spi->dev,
> +			"Failed to allocate 16-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
> +	if (IS_ERR(madera->regmap_32bit)) {
> +		ret = PTR_ERR(madera->regmap_32bit);
> +		dev_err(&spi->dev,
> +			"Failed to allocate 32-bit register map: %d\n",	ret);
> +		return ret;
> +	}
> +
> +	madera->type = type;
> +	madera->dev = &spi->dev;
> +	madera->irq = spi->irq;
> +
> +	return madera_dev_init(madera);
> +}
> +
> +static int madera_spi_remove(struct spi_device *spi)
> +{
> +	struct madera *madera = spi_get_drvdata(spi);
> +
> +	madera_dev_exit(madera);
> +
> +	return 0;
> +}
> +
> +static const struct spi_device_id madera_spi_ids[] = {
> +	{ "cs47l35", CS47L35 },
> +	{ "cs47l85", CS47L85 },
> +	{ "cs47l90", CS47L90 },
> +	{ "cs47l91", CS47L91 },
> +	{ "wm1840", WM1840 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(spi, madera_spi_ids);
> +
> +static struct spi_driver madera_spi_driver = {
> +	.driver = {
> +		.name	= "madera",
> +		.owner	= THIS_MODULE,

Drop this line, it's taken care of else where.

> +		.pm	= &madera_pm_ops,
> +		.of_match_table	= of_match_ptr(madera_of_match),
> +	},
> +	.probe		= madera_spi_probe,
> +	.remove		= madera_spi_remove,
> +	.id_table	= madera_spi_ids,
> +};
> +
> +module_spi_driver(madera_spi_driver);
> +
> +MODULE_DESCRIPTION("Madera SPI bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.wolfsonmicro.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
> new file mode 100644
> index 0000000..6d1b5b8
> --- /dev/null
> +++ b/drivers/mfd/madera.h
> @@ -0,0 +1,52 @@
> +/*
> + * MFD internals for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_MFD_H
> +#define MADERA_MFD_H
> +
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +
> +struct madera;
> +
> +extern const struct dev_pm_ops madera_pm_ops;
> +extern const struct of_device_id madera_of_match[];
> +
> +int madera_dev_init(struct madera *madera);
> +int madera_dev_exit(struct madera *madera);
> +
> +#ifdef CONFIG_OF
> +unsigned long madera_get_type_from_of(struct device *dev);
> +#else
> +static inline unsigned long madera_get_type_from_of(struct device *dev)
> +{
> +	return 0;
> +}
> +#endif
> +
> +extern const struct regmap_config cs47l35_16bit_spi_regmap;
> +extern const struct regmap_config cs47l35_32bit_spi_regmap;
> +extern const struct regmap_config cs47l35_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l35_32bit_i2c_regmap;
> +int cs47l35_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l85_16bit_spi_regmap;
> +extern const struct regmap_config cs47l85_32bit_spi_regmap;
> +extern const struct regmap_config cs47l85_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l85_32bit_i2c_regmap;
> +int cs47l85_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l90_16bit_spi_regmap;
> +extern const struct regmap_config cs47l90_32bit_spi_regmap;
> +extern const struct regmap_config cs47l90_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l90_32bit_i2c_regmap;
> +int cs47l90_patch(struct madera *madera);

Do you really need 3 copies of these regmap configs?

Why can't you use a generic one for all of them?

> +#endif
> diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
> new file mode 100644
> index 0000000..6609e3c
> --- /dev/null
> +++ b/include/linux/mfd/madera/core.h
> @@ -0,0 +1,180 @@
> +/*
> + * MFD internals for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_CORE_H
> +#define MADERA_CORE_H
> +
> +#include <linux/interrupt.h>
> +#include <linux/notifier.h>
> +#include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/irqchip/irq-madera.h>
> +#include <linux/mfd/madera/pdata.h>
> +#include <linux/regulator/consumer.h>
> +#include <sound/madera-pdata.h>

Alphabetical.

> +enum madera_type {
> +	CS47L35 = 1,
> +	CS47L85 = 2,
> +	CS47L90 = 3,
> +	CS47L91 = 4,
> +	WM1840 = 7,
> +};
> +
> +#define MADERA_MAX_CORE_SUPPLIES	2
> +#define MADERA_MAX_GPIOS		40
> +
> +#define CS47L35_NUM_GPIOS		16
> +#define CS47L85_NUM_GPIOS		40
> +#define CS47L90_NUM_GPIOS		38
> +
> +
> +/* Notifier events */
> +#define MADERA_NOTIFY_VOICE_TRIGGER	0x1
> +#define MADERA_NOTIFY_HPDET		0x2
> +#define MADERA_NOTIFY_MICDET		0x4
> +
> +/* GPIO Function Definitions */
> +#define MADERA_GP_FN_ALTERNATE		0x00
> +#define MADERA_GP_FN_GPIO		0x01
> +#define MADERA_GP_FN_DSP_GPIO		0x02
> +#define MADERA_GP_FN_IRQ1		0x03
> +#define MADERA_GP_FN_IRQ2		0x04
> +#define MADERA_GP_FN_FLL1_CLOCK		0x10
> +#define MADERA_GP_FN_FLL2_CLOCK		0x11
> +#define MADERA_GP_FN_FLL3_CLOCK		0x12
> +#define MADERA_GP_FN_FLLAO_CLOCK	0x13
> +#define MADERA_GP_FN_FLL1_LOCK		0x18
> +#define MADERA_GP_FN_FLL2_LOCK		0x19
> +#define MADERA_GP_FN_FLL3_LOCK		0x1A
> +#define MADERA_GP_FN_FLLAO_LOCK		0x1B
> +#define MADERA_GP_FN_OPCLK_OUT		0x40
> +#define MADERA_GP_FN_OPCLK_ASYNC_OUT	0x41
> +#define MADERA_GP_FN_PWM1		0x48
> +#define MADERA_GP_FN_PWM2		0x49
> +#define MADERA_GP_FN_SPDIF_OUT		0x4C
> +#define MADERA_GP_FN_HEADPHONE_DET	0x50
> +#define MADERA_GP_FN_MIC_DET		0x58
> +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT	0x80
> +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT	0x81
> +#define MADERA_GP_FN_ASRC1_IN1_LOCK	0x88
> +#define MADERA_GP_FN_ASRC1_IN2_LOCK	0x89
> +#define MADERA_GP_FN_ASRC2_IN1_LOCK	0x8A
> +#define MADERA_GP_FN_ASRC2_IN2_LOCK	0x8B
> +#define MADERA_GP_FN_DSP_IRQ1		0xA0
> +#define MADERA_GP_FN_DSP_IRQ2		0xA1
> +#define MADERA_GP_FN_DSP_IRQ3		0xA2
> +#define MADERA_GP_FN_DSP_IRQ4		0xA3
> +#define MADERA_GP_FN_DSP_IRQ5		0xA4
> +#define MADERA_GP_FN_DSP_IRQ6		0xA5
> +#define MADERA_GP_FN_DSP_IRQ7		0xA6
> +#define MADERA_GP_FN_DSP_IRQ8		0xA7
> +#define MADERA_GP_FN_DSP_IRQ9		0xA8
> +#define MADERA_GP_FN_DSP_IRQ10		0xA9
> +#define MADERA_GP_FN_DSP_IRQ11		0xAA
> +#define MADERA_GP_FN_DSP_IRQ12		0xAB
> +#define MADERA_GP_FN_DSP_IRQ13		0xAC
> +#define MADERA_GP_FN_DSP_IRQ14		0xAD
> +#define MADERA_GP_FN_DSP_IRQ15		0xAE
> +#define MADERA_GP_FN_DSP_IRQ16		0xAF
> +#define MADERA_GP_FN_HPOUT1L_SC		0xB0
> +#define MADERA_GP_FN_HPOUT1R_SC		0xB1
> +#define MADERA_GP_FN_HPOUT2L_SC		0xB2
> +#define MADERA_GP_FN_HPOUT2R_SC		0xB3
> +#define MADERA_GP_FN_HPOUT3L_SC		0xB4
> +#define MADERA_GP_FN_HPOUT4R_SC		0xB5
> +#define MADERA_GP_FN_SPKOUTL_SC		0xB6
> +#define MADERA_GP_FN_SPKOUTR_SC		0xB7
> +#define MADERA_GP_FN_HPOUT1L_ENA	0xC0
> +#define MADERA_GP_FN_HPOUT1R_ENA	0xC1
> +#define MADERA_GP_FN_HPOUT2L_ENA	0xC2
> +#define MADERA_GP_FN_HPOUT2R_ENA	0xC3
> +#define MADERA_GP_FN_HPOUT3L_ENA	0xC4
> +#define MADERA_GP_FN_HPOUT4R_ENA	0xC5
> +#define MADERA_GP_FN_SPKOUTL_ENA	0xC6
> +#define MADERA_GP_FN_SPKOUTR_ENA	0xC7
> +#define MADERA_GP_FN_HPOUT1L_DIS	0xD0
> +#define MADERA_GP_FN_HPOUT1R_DIS	0xD1
> +#define MADERA_GP_FN_HPOUT2L_DIS	0xD2
> +#define MADERA_GP_FN_HPOUT2R_DIS	0xD3
> +#define MADERA_GP_FN_HPOUT3L_DIS	0xD4
> +#define MADERA_GP_FN_HPOUT4R_DIS	0xD5
> +#define MADERA_GP_FN_SPKOUTL_DIS	0xD6
> +#define MADERA_GP_FN_SPKOUTR_DIS	0xD7
> +#define MADERA_GP_FN_SPK_SHUTDOWN	0xE0
> +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN	0xE1
> +#define MADERA_GP_FN_SPK_OVH_WARN	0xE2
> +#define MADERA_GP_FN_TIMER1_STATUS	0x140
> +#define MADERA_GP_FN_TIMER2_STATUS	0x141
> +#define MADERA_GP_FN_TIMER3_STATUS	0x142
> +#define MADERA_GP_FN_TIMER4_STATUS	0x143
> +#define MADERA_GP_FN_TIMER5_STATUS	0x144
> +#define MADERA_GP_FN_TIMER6_STATUS	0x145
> +#define MADERA_GP_FN_TIMER7_STATUS	0x146
> +#define MADERA_GP_FN_TIMER8_STATUS	0x147
> +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS	0x150
> +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS	0x151
> +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS	0x152
> +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS	0x153
> +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS	0x154
> +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS	0x155
> +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS	0x156
> +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS	0x157
> +
> +struct snd_soc_dapm_context;
> +
> +/*
> + * struct madera
> + *
> + * This should not be used by anything except child drivers of the Madera MFD
> + */
> +struct madera {
> +	struct regmap *regmap;
> +	struct regmap *regmap_32bit;
> +
> +	struct device *dev;
> +
> +	enum madera_type type;
> +	unsigned int rev;
> +
> +	struct gpio_desc *reset_gpio;
> +
> +	int num_core_supplies;
> +	struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
> +	struct regulator *dcvdd;
> +	bool internal_dcvdd;
> +
> +	struct madera_pdata pdata;
> +
> +	struct device *irq_dev;
> +	int irq;
> +
> +	unsigned int out_clamp[MADERA_MAX_OUTPUT];
> +	unsigned int out_shorted[MADERA_MAX_OUTPUT];
> +	unsigned int hp_ena;
> +
> +	struct snd_soc_dapm_context *dapm;
> +
> +	struct blocking_notifier_head notifier;
> +};

Please supply a kerneldoc header for this struct.

> +unsigned int madera_get_num_micbias(struct madera *madera);
> +unsigned int madera_get_num_childbias(struct madera *madera,
> +				      unsigned int micbias);
> +
> +const char *madera_name_from_type(enum madera_type type);
> +
> +static inline int madera_call_notifiers(struct madera *madera,
> +					unsigned long event,
> +					void *data)
> +{
> +	return blocking_notifier_call_chain(&madera->notifier, event, data);
> +}

Why do you need this function?

Why can't you just invoke blocking_notifier_call_chain() from the call
site?

> +#endif
> diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
> new file mode 100644
> index 0000000..b3af47c
> --- /dev/null
> +++ b/include/linux/mfd/madera/pdata.h
> @@ -0,0 +1,61 @@
> +/*
> + * Platform data for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2017 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_PDATA_H
> +#define MADERA_PDATA_H
> +
> +#include <linux/kernel.h>
> +#include <linux/irqchip/irq-madera-pdata.h>
> +#include <linux/regulator/arizona-ldo1.h>
> +#include <linux/regulator/arizona-micsupp.h>
> +#include <linux/regulator/machine.h>
> +#include <sound/madera-pdata.h>

Alphabetical.

> +#define MADERA_MAX_MICBIAS		4
> +#define MADERA_MAX_CHILD_MICBIAS	4
> +
> +#define MADERA_MAX_GPSW			2
> +
> +struct pinctrl_map;

Why is this here?

> +/**
> + * struct madera_pdata - Configuration data for Madera devices
> + *
> + * @reset:	    GPIO controlling /RESET (0 = none)
> + * @ldo1:	    Substruct of pdata for the LDO1 regulator
> + * @micvdd:	    Substruct of pdata for the MICVDD regulator
> + * @irqchip:	    Substruct of pdata for the irqchip driver
> + * @gpio_base:	    Base GPIO number
> + * @gpio_configs:   Array of GPIO configurations (See Documentation/pinctrl.txt)
> + * @n_gpio_configs: Number of entries in gpio_configs
> + * @codec:	    Substructure of pdata for the ASoC codec driver
> + *		    See include/sound/madera-pdata.h
> + * @gpsw:	    General purpose switch mode setting (See the SW1_MODE field
> + *		    in the datasheet for the available values for your codec)
> + */
> +struct madera_pdata {
> +	int reset;
> +
> +	struct arizona_ldo1_pdata ldo1;
> +	struct arizona_micsupp_pdata micvdd;
> +
> +	struct madera_irqchip_pdata irqchip;
> +
> +	int gpio_base;
> +
> +	const struct pinctrl_map *gpio_configs;
> +	int n_gpio_configs;
> +
> +	struct madera_codec_pdata codec;
> +
> +	u32 gpsw[MADERA_MAX_GPSW];
> +};
> +
> +#endif
diff mbox

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 4e07159..4a01a2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3304,7 +3304,10 @@  L:	patches@opensource.wolfsonmicro.com
 T:	git https://github.com/CirrusLogic/linux-drivers.git
 W:	https://github.com/CirrusLogic/linux-drivers/wiki
 S:	Supported
+F:	Documentation/devicetree/bindings/mfd/madera.txt
 F:	include/linux/mfd/madera/*
+F:	drivers/mfd/madera*
+F:	drivers/mfd/cs47l*
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..8128aaa 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -203,6 +203,35 @@  config MFD_CROS_EC_SPI
 	  response time cannot be guaranteed, we support ignoring
 	  'pre-amble' bytes before the response actually starts.
 
+config MFD_MADERA
+	bool
+
+config MFD_MADERA_I2C
+	bool "Cirrus Logic Madera codecs with I2C"
+	select REGMAP
+	select REGMAP_IRQ
+	select MFD_CORE
+	select REGMAP_I2C
+	select MFD_MADERA
+	select MADERA_IRQ
+	depends on I2C
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via I2C.
+
+config MFD_MADERA_SPI
+	bool "Cirrus Logic Madera codecs with SPI"
+	select REGMAP
+	select REGMAP_IRQ
+	select MFD_CORE
+	select REGMAP_SPI
+	select MFD_MADERA
+	select MADERA_IRQ
+	depends on SPI_MASTER
+	help
+	  Support for the Cirrus Logic Madera platform audio SoC
+	  core functionality controlled via SPI.
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..38b1514 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -72,6 +72,10 @@  obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
 obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 
+obj-$(CONFIG_MFD_MADERA)	+= madera-core.o
+obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
+obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
+
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
new file mode 100644
index 0000000..bed018d
--- /dev/null
+++ b/drivers/mfd/madera-core.c
@@ -0,0 +1,635 @@ 
+/*
+ * Core MFD support for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/registers.h>
+
+#include "madera.h"
+
+#define CS47L35_SILICON_ID	0x6360
+#define CS47L85_SILICON_ID	0x6338
+#define CS47L90_SILICON_ID	0x6364
+
+#define MADERA_32KZ_MCLK2	1
+
+static const char * const madera_core_supplies[] = {
+	"AVDD",
+	"DBVDD1",
+};
+
+static const struct mfd_cell madera_ldo1_devs[] = {
+	{ .name = "madera-ldo1" },
+};
+
+static const char * const cs47l35_supplies[] = {
+	"MICVDD",
+	"DBVDD2",
+	"CPVDD1",
+	"CPVDD2",
+	"SPKVDD",
+};
+
+static const struct mfd_cell cs47l35_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp", },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{
+		.name = "cs47l35-codec",
+		.of_compatible = "cirrus,cs47l35-codec",
+		.parent_supplies = cs47l35_supplies,
+		.num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
+	},
+};
+
+static const char * const cs47l85_supplies[] = {
+	"MICVDD",
+	"DBVDD2",
+	"DBVDD3",
+	"DBVDD4",
+	"CPVDD1",
+	"CPVDD2",
+	"SPKVDDL",
+	"SPKVDDR",
+};
+
+static const struct mfd_cell cs47l85_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp" },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{
+		.name = "cs47l85-codec",
+		.of_compatible = "cirrus,cs47l85-codec",
+		.parent_supplies = cs47l85_supplies,
+		.num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
+	},
+};
+
+static const char * const cs47l90_supplies[] = {
+	"MICVDD",
+	"DBVDD2",
+	"DBVDD3",
+	"DBVDD4",
+	"CPVDD1",
+	"CPVDD2",
+};
+
+static const struct mfd_cell cs47l90_devs[] = {
+	{ .name = "madera-pinctrl", .of_compatible = "cirrus,madera-pinctrl" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-micsupp", },
+	{ .name = "madera-gpio",    .of_compatible = "cirrus,madera-gpio" },
+	{ .name = "madera-extcon",  .of_compatible = "cirrus,madera-extcon" },
+	{
+		.name = "cs47l90-codec",
+		 .of_compatible = "cirrus,cs47l90-codec",
+		.parent_supplies = cs47l90_supplies,
+		.num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
+	},
+};
+
+const char *madera_name_from_type(enum madera_type type)
+{
+	switch (type) {
+	case CS47L35:
+		return "CS47L35";
+	case CS47L85:
+		return "CS47L85";
+	case CS47L90:
+		return "CS47L90";
+	case CS47L91:
+		return "CS47L91";
+	case WM1840:
+		return "WM1840";
+	default:
+		return "Unknown";
+	}
+}
+EXPORT_SYMBOL_GPL(madera_name_from_type);
+
+#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
+#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
+
+static int madera_wait_for_boot(struct madera *madera)
+{
+	unsigned int val;
+	int ret;
+
+	/*
+	 * We can't use an interrupt as we need to runtime resume to do so,
+	 * so we poll the status bit. This won't race with the interrupt
+	 * handler because it will be blocked on runtime resume.
+	 */
+	ret = regmap_read_poll_timeout(madera->regmap,
+				       MADERA_IRQ1_RAW_STATUS_1,
+				       val,
+				       (val & MADERA_BOOT_DONE_STS1),
+				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
+				       MADERA_BOOT_POLL_TIMEOUT_US);
+
+	if (ret)
+		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
+
+	/*
+	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
+	 * Do this unconditionally to avoid interrupt storms
+	 */
+	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
+		     MADERA_BOOT_DONE_EINT1);
+
+	pm_runtime_mark_last_busy(madera->dev);
+
+	return ret;
+}
+
+static int madera_soft_reset(struct madera *madera)
+{
+	int ret;
+
+	ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
+	if (ret != 0) {
+		dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
+		return ret;
+	}
+
+	/* Allow time for internal clocks to startup after reset */
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static void madera_enable_hard_reset(struct madera *madera)
+{
+	if (madera->reset_gpio)
+		gpiod_set_value_cansleep(madera->reset_gpio, 0);
+}
+
+static void madera_disable_hard_reset(struct madera *madera)
+{
+	if (madera->reset_gpio) {
+		gpiod_set_value_cansleep(madera->reset_gpio, 1);
+		usleep_range(1000, 2000);
+	}
+}
+
+#ifdef CONFIG_PM
+static int madera_runtime_resume(struct device *dev)
+{
+	struct madera *madera = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "Leaving sleep mode\n");
+
+	ret = regulator_enable(madera->dcvdd);
+	if (ret) {
+		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
+		return ret;
+	}
+
+	regcache_cache_only(madera->regmap, false);
+	regcache_cache_only(madera->regmap_32bit, false);
+
+	ret = madera_wait_for_boot(madera);
+	if (ret)
+		goto err;
+
+	ret = regcache_sync(madera->regmap);
+	if (ret) {
+		dev_err(dev, "Failed to restore 16-bit register cache\n");
+		goto err;
+	}
+
+	ret = regcache_sync(madera->regmap_32bit);
+	if (ret) {
+		dev_err(dev, "Failed to restore 32-bit register cache\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	regcache_cache_only(madera->regmap_32bit, true);
+	regcache_cache_only(madera->regmap, true);
+	regulator_disable(madera->dcvdd);
+
+	return ret;
+}
+
+static int madera_runtime_suspend(struct device *dev)
+{
+	struct madera *madera = dev_get_drvdata(dev);
+
+	dev_dbg(madera->dev, "Entering sleep mode\n");
+
+	regcache_cache_only(madera->regmap, true);
+	regcache_mark_dirty(madera->regmap);
+	regcache_cache_only(madera->regmap_32bit, true);
+	regcache_mark_dirty(madera->regmap_32bit);
+
+	regulator_disable(madera->dcvdd);
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops madera_pm_ops = {
+	SET_RUNTIME_PM_OPS(madera_runtime_suspend,
+			   madera_runtime_resume,
+			   NULL)
+};
+EXPORT_SYMBOL_GPL(madera_pm_ops);
+
+unsigned int madera_get_num_micbias(struct madera *madera)
+{
+
+	switch (madera->type) {
+	case CS47L35:
+		return 2;
+	case CS47L85:
+	case WM1840:
+		return 4;
+	case CS47L90:
+	case CS47L91:
+		return 2;
+	default:
+		dev_warn(madera->dev, "No micbias known for codec %s\n",
+			 madera_name_from_type(madera->type));
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(madera_get_num_micbias);
+
+unsigned int madera_get_num_childbias(struct madera *madera,
+				      unsigned int micbias)
+{
+	/*
+	 * micbias argument reserved for future codecs that don't
+	 * have the same number of children on each micbias
+	 */
+
+	switch (madera->type) {
+	case CS47L35:
+		return 2;
+	case CS47L85:
+	case WM1840:
+		return 0;
+	case CS47L90:
+	case CS47L91:
+		return 4;
+	default:
+		dev_warn(madera->dev, "No child micbias known for codec %s\n",
+			 madera_name_from_type(madera->type));
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(madera_get_num_childbias);
+
+#ifdef CONFIG_OF
+const struct of_device_id madera_of_match[] = {
+	{ .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
+	{ .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
+	{ .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
+	{ .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
+	{ .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
+	{},
+};
+EXPORT_SYMBOL_GPL(madera_of_match);
+
+unsigned long madera_get_type_from_of(struct device *dev)
+{
+	const struct of_device_id *id = of_match_device(madera_of_match, dev);
+
+	if (id)
+		return (unsigned long)id->data;
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(madera_get_type_from_of);
+#endif
+
+static int madera_get_reset_gpio(struct madera *madera)
+{
+	int ret;
+
+	/* We use 0 in pdata to indicate a GPIO has not been set */
+	if (dev_get_platdata(madera->dev) && (madera->pdata.reset > 0)) {
+		/* Start out with /RESET asserted */
+		ret = devm_gpio_request_one(madera->dev,
+					    madera->pdata.reset,
+					    GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+					    "madera reset");
+		if (!ret)
+			madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
+	} else {
+		madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
+							     "reset",
+							     GPIOD_OUT_LOW);
+		if (IS_ERR(madera->reset_gpio))
+			ret = PTR_ERR(madera->reset_gpio);
+		else
+			ret = 0;
+	}
+
+	if (ret == -EPROBE_DEFER)
+		return ret;
+
+	if (ret) {
+		dev_err(madera->dev, "Failed to request /RESET: %d\n", ret);
+		return ret;
+	}
+
+	if (!madera->reset_gpio)
+		dev_warn(madera->dev,
+			 "Running without reset GPIO is not recommended\n");
+
+	return 0;
+}
+
+int madera_dev_init(struct madera *madera)
+{
+	struct device *dev = madera->dev;
+	const char *name;
+	unsigned int hwid;
+	int (*patch_fn)(struct madera *) = NULL;
+	const struct mfd_cell *mfd_devs;
+	int n_devs = 0;
+	int i, ret;
+
+	dev_set_drvdata(madera->dev, madera);
+	BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
+
+	if (dev_get_platdata(madera->dev)) {
+		memcpy(&madera->pdata, dev_get_platdata(madera->dev),
+		       sizeof(madera->pdata));
+	}
+
+	ret = madera_get_reset_gpio(madera);
+	if (ret)
+		return ret;
+
+	regcache_cache_only(madera->regmap, true);
+	regcache_cache_only(madera->regmap_32bit, true);
+
+	for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
+		madera->core_supplies[i].supply = madera_core_supplies[i];
+
+	madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
+
+	switch (madera->type) {
+	case CS47L35:
+	case CS47L90:
+	case CS47L91:
+		break;
+	case CS47L85:
+	case WM1840:
+		/* On these DCVDD could be supplied from the onboard LDO1 */
+		ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
+				      madera_ldo1_devs,
+				      ARRAY_SIZE(madera_ldo1_devs),
+				      NULL, 0, NULL);
+		if (ret) {
+			dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
+			return ret;
+		}
+		break;
+	default:
+		dev_err(madera->dev, "Unknown device type %d\n", madera->type);
+		return -ENODEV;
+	}
+
+	ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
+				      madera->core_supplies);
+	if (ret) {
+		dev_err(dev, "Failed to request core supplies: %d\n", ret);
+		goto err_devs;
+	}
+
+	/*
+	 * Don't use devres here because the only device we have to get
+	 * against is the MFD device and DCVDD will likely be supplied by
+	 * one of its children. Meaning that the regulator will be
+	 * destroyed by the time devres calls regulator put.
+	 */
+	madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
+	if (IS_ERR(madera->dcvdd)) {
+		ret = PTR_ERR(madera->dcvdd);
+		dev_err(dev, "Failed to request DCVDD: %d\n", ret);
+		goto err_devs;
+	}
+
+	ret = regulator_bulk_enable(madera->num_core_supplies,
+				    madera->core_supplies);
+	if (ret) {
+		dev_err(dev, "Failed to enable core supplies: %d\n", ret);
+		goto err_dcvdd;
+	}
+
+	ret = regulator_enable(madera->dcvdd);
+	if (ret) {
+		dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
+		goto err_enable;
+	}
+
+	madera_disable_hard_reset(madera);
+
+	regcache_cache_only(madera->regmap, false);
+	regcache_cache_only(madera->regmap_32bit, false);
+
+	/*
+	 * Verify that this is a chip we know about before we
+	 * starting doing any writes to its registers
+	 */
+	ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
+	if (ret) {
+		dev_err(dev, "Failed to read ID register: %d\n", ret);
+		goto err_reset;
+	}
+
+	switch (hwid) {
+	case CS47L35_SILICON_ID:
+	case CS47L85_SILICON_ID:
+	case CS47L90_SILICON_ID:
+		break;
+	default:
+		dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
+		ret = -EINVAL;
+		goto err_reset;
+	}
+
+	/* If we don't have a reset GPIO use a soft reset */
+	if (!madera->reset_gpio) {
+		ret = madera_soft_reset(madera);
+		if (ret)
+			goto err_reset;
+	}
+
+	ret = madera_wait_for_boot(madera);
+	if (ret) {
+		dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
+		goto err_reset;
+	}
+
+	ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
+			  &madera->rev);
+	if (ret) {
+		dev_err(dev, "Failed to read revision register: %d\n", ret);
+		goto err_reset;
+	}
+	madera->rev &= MADERA_HW_REVISION_MASK;
+
+	name = madera_name_from_type(madera->type);
+
+	switch (hwid) {
+	case CS47L35_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			switch (madera->type) {
+			case CS47L35:
+				patch_fn = cs47l35_patch;
+				mfd_devs = cs47l35_devs;
+				n_devs = ARRAY_SIZE(cs47l35_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	case CS47L85_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			switch (madera->type) {
+			case CS47L85:
+			case WM1840:
+				patch_fn = cs47l85_patch;
+				mfd_devs = cs47l85_devs;
+				n_devs = ARRAY_SIZE(cs47l85_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	case CS47L90_SILICON_ID:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			switch (madera->type) {
+			case CS47L90:
+			case CS47L91:
+				patch_fn = cs47l90_patch;
+				mfd_devs = cs47l90_devs;
+				n_devs = ARRAY_SIZE(cs47l90_devs);
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	default:
+		break;
+	}
+
+	if (!n_devs) {
+		dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
+		ret = -ENODEV;
+		goto err_reset;
+	}
+
+	dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
+
+	/* Apply hardware patch */
+	if (patch_fn) {
+		ret = patch_fn(madera);
+		if (ret) {
+			dev_err(madera->dev, "Failed to apply patch %d\n", ret);
+			goto err_reset;
+		}
+	}
+
+	/* Init 32k clock sourced from MCLK2 */
+	ret = regmap_update_bits(madera->regmap,
+			MADERA_CLOCK_32K_1,
+			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
+			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
+	if (ret) {
+		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
+		goto err_reset;
+	}
+
+	pm_runtime_set_active(madera->dev);
+	pm_runtime_enable(madera->dev);
+	pm_runtime_set_autosuspend_delay(madera->dev, 100);
+	pm_runtime_use_autosuspend(madera->dev);
+
+	ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
+			      mfd_devs, n_devs,
+			      NULL, 0, NULL);
+	if (ret) {
+		dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
+		goto err_pm_runtime;
+	}
+
+	return 0;
+
+err_pm_runtime:
+	pm_runtime_disable(madera->dev);
+err_reset:
+	madera_enable_hard_reset(madera);
+	regulator_disable(madera->dcvdd);
+err_enable:
+	regulator_bulk_disable(madera->num_core_supplies,
+			       madera->core_supplies);
+err_dcvdd:
+	regulator_put(madera->dcvdd);
+err_devs:
+	mfd_remove_devices(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(madera_dev_init);
+
+int madera_dev_exit(struct madera *madera)
+{
+	/* Prevent any IRQs being serviced while we clean up */
+	disable_irq(madera->irq);
+
+	/*
+	 * DCVDD could be supplied by a child node, we must disable it before
+	 * removing the children, and prevent PM runtime from turning it back on
+	 */
+	pm_runtime_disable(madera->dev);
+
+	regulator_disable(madera->dcvdd);
+	regulator_put(madera->dcvdd);
+
+	mfd_remove_devices(madera->dev);
+	madera_enable_hard_reset(madera);
+
+	regulator_bulk_disable(madera->num_core_supplies,
+			       madera->core_supplies);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(madera_dev_exit);
diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
new file mode 100644
index 0000000..20e4cd4
--- /dev/null
+++ b/drivers/mfd/madera-i2c.c
@@ -0,0 +1,131 @@ 
+/*
+ * I2C bus interface to Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#include <linux/mfd/madera/core.h>
+
+#include "madera.h"
+
+static int madera_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct madera *madera;
+	const struct regmap_config *regmap_16bit_config = NULL;
+	const struct regmap_config *regmap_32bit_config = NULL;
+	unsigned long type;
+	int ret;
+
+	if (i2c->dev.of_node)
+		type = madera_get_type_from_of(&i2c->dev);
+	else
+		type = id->driver_data;
+
+	switch (type) {
+	case CS47L35:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
+		}
+		break;
+	case CS47L85:
+	case WM1840:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
+		}
+		break;
+	case CS47L90:
+	case CS47L91:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
+			regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
+		}
+		break;
+	default:
+		dev_err(&i2c->dev,
+			"Unknown Madera I2C device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_16bit_config) {
+		dev_err(&i2c->dev,
+			"Kernel does not include support for %s\n",
+			madera_name_from_type(type));
+		return -EINVAL;
+	}
+
+	madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
+	if (!madera)
+		return -ENOMEM;
+
+	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
+	if (IS_ERR(madera->regmap)) {
+		ret = PTR_ERR(madera->regmap);
+		dev_err(&i2c->dev,
+			"Failed to allocate 16-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
+	if (IS_ERR(madera->regmap_32bit)) {
+		ret = PTR_ERR(madera->regmap_32bit);
+		dev_err(&i2c->dev,
+			"Failed to allocate 32-bit register map: %d\n", ret);
+		return ret;
+	}
+
+	madera->type = type;
+	madera->dev = &i2c->dev;
+	madera->irq = i2c->irq;
+
+	return madera_dev_init(madera);
+}
+
+static int madera_i2c_remove(struct i2c_client *i2c)
+{
+	struct madera *madera = dev_get_drvdata(&i2c->dev);
+
+	madera_dev_exit(madera);
+
+	return 0;
+}
+
+static const struct i2c_device_id madera_i2c_id[] = {
+	{ "cs47l35", CS47L35 },
+	{ "cs47l85", CS47L85 },
+	{ "cs47l90", CS47L90 },
+	{ "cs47l91", CS47L91 },
+	{ "wm1840", WM1840 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
+
+static struct i2c_driver madera_i2c_driver = {
+	.driver = {
+		.name	= "madera",
+		.pm	= &madera_pm_ops,
+		.of_match_table	= of_match_ptr(madera_of_match),
+	},
+	.probe		= madera_i2c_probe,
+	.remove		= madera_i2c_remove,
+	.id_table	= madera_i2c_id,
+};
+
+module_i2c_driver(madera_i2c_driver);
+
+MODULE_DESCRIPTION("Madera I2C bus interface");
+MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
new file mode 100644
index 0000000..375bb36
--- /dev/null
+++ b/drivers/mfd/madera-spi.c
@@ -0,0 +1,132 @@ 
+/*
+ * SPI bus interface to Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mfd/madera/core.h>
+
+#include "madera.h"
+
+static int madera_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct madera *madera;
+	const struct regmap_config *regmap_16bit_config = NULL;
+	const struct regmap_config *regmap_32bit_config = NULL;
+	unsigned long type;
+	int ret;
+
+	if (spi->dev.of_node)
+		type = madera_get_type_from_of(&spi->dev);
+	else
+		type = id->driver_data;
+
+	switch (type) {
+	case CS47L35:
+		if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
+			regmap_16bit_config = &cs47l35_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l35_32bit_spi_regmap;
+		}
+		break;
+	case CS47L85:
+	case WM1840:
+		if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
+			regmap_16bit_config = &cs47l85_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l85_32bit_spi_regmap;
+		}
+		break;
+	case CS47L90:
+	case CS47L91:
+		if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
+			regmap_16bit_config = &cs47l90_16bit_spi_regmap;
+			regmap_32bit_config = &cs47l90_32bit_spi_regmap;
+		}
+		break;
+	default:
+		dev_err(&spi->dev,
+			"Unknown Madera SPI device type %ld\n", type);
+		return -EINVAL;
+	}
+
+	if (!regmap_16bit_config) {
+		dev_err(&spi->dev,
+			"Kernel does not include support for %s\n",
+			madera_name_from_type(type));
+		return -EINVAL;
+	}
+
+	madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
+	if (!madera)
+		return -ENOMEM;
+
+	madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
+	if (IS_ERR(madera->regmap)) {
+		ret = PTR_ERR(madera->regmap);
+		dev_err(&spi->dev,
+			"Failed to allocate 16-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
+	if (IS_ERR(madera->regmap_32bit)) {
+		ret = PTR_ERR(madera->regmap_32bit);
+		dev_err(&spi->dev,
+			"Failed to allocate 32-bit register map: %d\n",	ret);
+		return ret;
+	}
+
+	madera->type = type;
+	madera->dev = &spi->dev;
+	madera->irq = spi->irq;
+
+	return madera_dev_init(madera);
+}
+
+static int madera_spi_remove(struct spi_device *spi)
+{
+	struct madera *madera = spi_get_drvdata(spi);
+
+	madera_dev_exit(madera);
+
+	return 0;
+}
+
+static const struct spi_device_id madera_spi_ids[] = {
+	{ "cs47l35", CS47L35 },
+	{ "cs47l85", CS47L85 },
+	{ "cs47l90", CS47L90 },
+	{ "cs47l91", CS47L91 },
+	{ "wm1840", WM1840 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, madera_spi_ids);
+
+static struct spi_driver madera_spi_driver = {
+	.driver = {
+		.name	= "madera",
+		.owner	= THIS_MODULE,
+		.pm	= &madera_pm_ops,
+		.of_match_table	= of_match_ptr(madera_of_match),
+	},
+	.probe		= madera_spi_probe,
+	.remove		= madera_spi_remove,
+	.id_table	= madera_spi_ids,
+};
+
+module_spi_driver(madera_spi_driver);
+
+MODULE_DESCRIPTION("Madera SPI bus interface");
+MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
new file mode 100644
index 0000000..6d1b5b8
--- /dev/null
+++ b/drivers/mfd/madera.h
@@ -0,0 +1,52 @@ 
+/*
+ * MFD internals for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_MFD_H
+#define MADERA_MFD_H
+
+#include <linux/of.h>
+#include <linux/pm.h>
+
+struct madera;
+
+extern const struct dev_pm_ops madera_pm_ops;
+extern const struct of_device_id madera_of_match[];
+
+int madera_dev_init(struct madera *madera);
+int madera_dev_exit(struct madera *madera);
+
+#ifdef CONFIG_OF
+unsigned long madera_get_type_from_of(struct device *dev);
+#else
+static inline unsigned long madera_get_type_from_of(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+extern const struct regmap_config cs47l35_16bit_spi_regmap;
+extern const struct regmap_config cs47l35_32bit_spi_regmap;
+extern const struct regmap_config cs47l35_16bit_i2c_regmap;
+extern const struct regmap_config cs47l35_32bit_i2c_regmap;
+int cs47l35_patch(struct madera *madera);
+
+extern const struct regmap_config cs47l85_16bit_spi_regmap;
+extern const struct regmap_config cs47l85_32bit_spi_regmap;
+extern const struct regmap_config cs47l85_16bit_i2c_regmap;
+extern const struct regmap_config cs47l85_32bit_i2c_regmap;
+int cs47l85_patch(struct madera *madera);
+
+extern const struct regmap_config cs47l90_16bit_spi_regmap;
+extern const struct regmap_config cs47l90_32bit_spi_regmap;
+extern const struct regmap_config cs47l90_16bit_i2c_regmap;
+extern const struct regmap_config cs47l90_32bit_i2c_regmap;
+int cs47l90_patch(struct madera *madera);
+
+#endif
diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
new file mode 100644
index 0000000..6609e3c
--- /dev/null
+++ b/include/linux/mfd/madera/core.h
@@ -0,0 +1,180 @@ 
+/*
+ * MFD internals for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_CORE_H
+#define MADERA_CORE_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include <linux/irqchip/irq-madera.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/regulator/consumer.h>
+#include <sound/madera-pdata.h>
+
+enum madera_type {
+	CS47L35 = 1,
+	CS47L85 = 2,
+	CS47L90 = 3,
+	CS47L91 = 4,
+	WM1840 = 7,
+};
+
+#define MADERA_MAX_CORE_SUPPLIES	2
+#define MADERA_MAX_GPIOS		40
+
+#define CS47L35_NUM_GPIOS		16
+#define CS47L85_NUM_GPIOS		40
+#define CS47L90_NUM_GPIOS		38
+
+
+/* Notifier events */
+#define MADERA_NOTIFY_VOICE_TRIGGER	0x1
+#define MADERA_NOTIFY_HPDET		0x2
+#define MADERA_NOTIFY_MICDET		0x4
+
+/* GPIO Function Definitions */
+#define MADERA_GP_FN_ALTERNATE		0x00
+#define MADERA_GP_FN_GPIO		0x01
+#define MADERA_GP_FN_DSP_GPIO		0x02
+#define MADERA_GP_FN_IRQ1		0x03
+#define MADERA_GP_FN_IRQ2		0x04
+#define MADERA_GP_FN_FLL1_CLOCK		0x10
+#define MADERA_GP_FN_FLL2_CLOCK		0x11
+#define MADERA_GP_FN_FLL3_CLOCK		0x12
+#define MADERA_GP_FN_FLLAO_CLOCK	0x13
+#define MADERA_GP_FN_FLL1_LOCK		0x18
+#define MADERA_GP_FN_FLL2_LOCK		0x19
+#define MADERA_GP_FN_FLL3_LOCK		0x1A
+#define MADERA_GP_FN_FLLAO_LOCK		0x1B
+#define MADERA_GP_FN_OPCLK_OUT		0x40
+#define MADERA_GP_FN_OPCLK_ASYNC_OUT	0x41
+#define MADERA_GP_FN_PWM1		0x48
+#define MADERA_GP_FN_PWM2		0x49
+#define MADERA_GP_FN_SPDIF_OUT		0x4C
+#define MADERA_GP_FN_HEADPHONE_DET	0x50
+#define MADERA_GP_FN_MIC_DET		0x58
+#define MADERA_GP_FN_DRC1_SIGNAL_DETECT	0x80
+#define MADERA_GP_FN_DRC2_SIGNAL_DETECT	0x81
+#define MADERA_GP_FN_ASRC1_IN1_LOCK	0x88
+#define MADERA_GP_FN_ASRC1_IN2_LOCK	0x89
+#define MADERA_GP_FN_ASRC2_IN1_LOCK	0x8A
+#define MADERA_GP_FN_ASRC2_IN2_LOCK	0x8B
+#define MADERA_GP_FN_DSP_IRQ1		0xA0
+#define MADERA_GP_FN_DSP_IRQ2		0xA1
+#define MADERA_GP_FN_DSP_IRQ3		0xA2
+#define MADERA_GP_FN_DSP_IRQ4		0xA3
+#define MADERA_GP_FN_DSP_IRQ5		0xA4
+#define MADERA_GP_FN_DSP_IRQ6		0xA5
+#define MADERA_GP_FN_DSP_IRQ7		0xA6
+#define MADERA_GP_FN_DSP_IRQ8		0xA7
+#define MADERA_GP_FN_DSP_IRQ9		0xA8
+#define MADERA_GP_FN_DSP_IRQ10		0xA9
+#define MADERA_GP_FN_DSP_IRQ11		0xAA
+#define MADERA_GP_FN_DSP_IRQ12		0xAB
+#define MADERA_GP_FN_DSP_IRQ13		0xAC
+#define MADERA_GP_FN_DSP_IRQ14		0xAD
+#define MADERA_GP_FN_DSP_IRQ15		0xAE
+#define MADERA_GP_FN_DSP_IRQ16		0xAF
+#define MADERA_GP_FN_HPOUT1L_SC		0xB0
+#define MADERA_GP_FN_HPOUT1R_SC		0xB1
+#define MADERA_GP_FN_HPOUT2L_SC		0xB2
+#define MADERA_GP_FN_HPOUT2R_SC		0xB3
+#define MADERA_GP_FN_HPOUT3L_SC		0xB4
+#define MADERA_GP_FN_HPOUT4R_SC		0xB5
+#define MADERA_GP_FN_SPKOUTL_SC		0xB6
+#define MADERA_GP_FN_SPKOUTR_SC		0xB7
+#define MADERA_GP_FN_HPOUT1L_ENA	0xC0
+#define MADERA_GP_FN_HPOUT1R_ENA	0xC1
+#define MADERA_GP_FN_HPOUT2L_ENA	0xC2
+#define MADERA_GP_FN_HPOUT2R_ENA	0xC3
+#define MADERA_GP_FN_HPOUT3L_ENA	0xC4
+#define MADERA_GP_FN_HPOUT4R_ENA	0xC5
+#define MADERA_GP_FN_SPKOUTL_ENA	0xC6
+#define MADERA_GP_FN_SPKOUTR_ENA	0xC7
+#define MADERA_GP_FN_HPOUT1L_DIS	0xD0
+#define MADERA_GP_FN_HPOUT1R_DIS	0xD1
+#define MADERA_GP_FN_HPOUT2L_DIS	0xD2
+#define MADERA_GP_FN_HPOUT2R_DIS	0xD3
+#define MADERA_GP_FN_HPOUT3L_DIS	0xD4
+#define MADERA_GP_FN_HPOUT4R_DIS	0xD5
+#define MADERA_GP_FN_SPKOUTL_DIS	0xD6
+#define MADERA_GP_FN_SPKOUTR_DIS	0xD7
+#define MADERA_GP_FN_SPK_SHUTDOWN	0xE0
+#define MADERA_GP_FN_SPK_OVH_SHUTDOWN	0xE1
+#define MADERA_GP_FN_SPK_OVH_WARN	0xE2
+#define MADERA_GP_FN_TIMER1_STATUS	0x140
+#define MADERA_GP_FN_TIMER2_STATUS	0x141
+#define MADERA_GP_FN_TIMER3_STATUS	0x142
+#define MADERA_GP_FN_TIMER4_STATUS	0x143
+#define MADERA_GP_FN_TIMER5_STATUS	0x144
+#define MADERA_GP_FN_TIMER6_STATUS	0x145
+#define MADERA_GP_FN_TIMER7_STATUS	0x146
+#define MADERA_GP_FN_TIMER8_STATUS	0x147
+#define MADERA_GP_FN_EVENTLOG1_FIFO_STS	0x150
+#define MADERA_GP_FN_EVENTLOG2_FIFO_STS	0x151
+#define MADERA_GP_FN_EVENTLOG3_FIFO_STS	0x152
+#define MADERA_GP_FN_EVENTLOG4_FIFO_STS	0x153
+#define MADERA_GP_FN_EVENTLOG5_FIFO_STS	0x154
+#define MADERA_GP_FN_EVENTLOG6_FIFO_STS	0x155
+#define MADERA_GP_FN_EVENTLOG7_FIFO_STS	0x156
+#define MADERA_GP_FN_EVENTLOG8_FIFO_STS	0x157
+
+struct snd_soc_dapm_context;
+
+/*
+ * struct madera
+ *
+ * This should not be used by anything except child drivers of the Madera MFD
+ */
+struct madera {
+	struct regmap *regmap;
+	struct regmap *regmap_32bit;
+
+	struct device *dev;
+
+	enum madera_type type;
+	unsigned int rev;
+
+	struct gpio_desc *reset_gpio;
+
+	int num_core_supplies;
+	struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
+	struct regulator *dcvdd;
+	bool internal_dcvdd;
+
+	struct madera_pdata pdata;
+
+	struct device *irq_dev;
+	int irq;
+
+	unsigned int out_clamp[MADERA_MAX_OUTPUT];
+	unsigned int out_shorted[MADERA_MAX_OUTPUT];
+	unsigned int hp_ena;
+
+	struct snd_soc_dapm_context *dapm;
+
+	struct blocking_notifier_head notifier;
+};
+
+unsigned int madera_get_num_micbias(struct madera *madera);
+unsigned int madera_get_num_childbias(struct madera *madera,
+				      unsigned int micbias);
+
+const char *madera_name_from_type(enum madera_type type);
+
+static inline int madera_call_notifiers(struct madera *madera,
+					unsigned long event,
+					void *data)
+{
+	return blocking_notifier_call_chain(&madera->notifier, event, data);
+}
+#endif
diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
new file mode 100644
index 0000000..b3af47c
--- /dev/null
+++ b/include/linux/mfd/madera/pdata.h
@@ -0,0 +1,61 @@ 
+/*
+ * Platform data for Cirrus Logic Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_PDATA_H
+#define MADERA_PDATA_H
+
+#include <linux/kernel.h>
+#include <linux/irqchip/irq-madera-pdata.h>
+#include <linux/regulator/arizona-ldo1.h>
+#include <linux/regulator/arizona-micsupp.h>
+#include <linux/regulator/machine.h>
+#include <sound/madera-pdata.h>
+
+#define MADERA_MAX_MICBIAS		4
+#define MADERA_MAX_CHILD_MICBIAS	4
+
+#define MADERA_MAX_GPSW			2
+
+struct pinctrl_map;
+
+/**
+ * struct madera_pdata - Configuration data for Madera devices
+ *
+ * @reset:	    GPIO controlling /RESET (0 = none)
+ * @ldo1:	    Substruct of pdata for the LDO1 regulator
+ * @micvdd:	    Substruct of pdata for the MICVDD regulator
+ * @irqchip:	    Substruct of pdata for the irqchip driver
+ * @gpio_base:	    Base GPIO number
+ * @gpio_configs:   Array of GPIO configurations (See Documentation/pinctrl.txt)
+ * @n_gpio_configs: Number of entries in gpio_configs
+ * @codec:	    Substructure of pdata for the ASoC codec driver
+ *		    See include/sound/madera-pdata.h
+ * @gpsw:	    General purpose switch mode setting (See the SW1_MODE field
+ *		    in the datasheet for the available values for your codec)
+ */
+struct madera_pdata {
+	int reset;
+
+	struct arizona_ldo1_pdata ldo1;
+	struct arizona_micsupp_pdata micvdd;
+
+	struct madera_irqchip_pdata irqchip;
+
+	int gpio_base;
+
+	const struct pinctrl_map *gpio_configs;
+	int n_gpio_configs;
+
+	struct madera_codec_pdata codec;
+
+	u32 gpsw[MADERA_MAX_GPSW];
+};
+
+#endif