@@ -58,7 +58,8 @@ static const struct reg_sequence rt5514_i2c_patch[] = {
};
static const struct reg_sequence rt5514_patch[] = {
- {RT5514_DIG_IO_CTRL, 0x00000040},
+ {RT5514_DIG_IO_CTRL, 0x00000240},
+ {RT5514_GPIO_CTRL1, 0x04000000},
{RT5514_CLK_CTRL1, 0x38020041},
{RT5514_SRC_CTRL, 0x44000eee},
{RT5514_ANA_CTRL_LDO10, 0x00028604},
@@ -74,7 +75,8 @@ static const struct reg_default rt5514_reg[] = {
{RT5514_I2S_CTRL2, 0x20000000},
{RT5514_VAD_CTRL6, 0xc00007d2},
{RT5514_EXT_VAD_CTRL, 0x80000080},
- {RT5514_DIG_IO_CTRL, 0x00000040},
+ {RT5514_DIG_IO_CTRL, 0x00000240},
+ {RT5514_GPIO_CTRL1, 0x04000000},
{RT5514_PAD_CTRL1, 0x00804000},
{RT5514_DMIC_DATA_CTRL, 0x00000005},
{RT5514_DIG_SOURCE_CTRL, 0x00000002},
@@ -25,6 +25,7 @@
#define RT5514_VAD_CTRL6 0x2030
#define RT5514_EXT_VAD_CTRL 0x206c
#define RT5514_DIG_IO_CTRL 0x2070
+#define RT5514_GPIO_CTRL1 0x2074
#define RT5514_PAD_CTRL1 0x2080
#define RT5514_DMIC_DATA_CTRL 0x20a0
#define RT5514_DIG_SOURCE_CTRL 0x20a4
The patch set the pin GPIO6(IRQ) to output low as default to prevent the IRQ pin to trigger the IRQ function continuously in the float status. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> --- sound/soc/codecs/rt5514.c | 6 ++++-- sound/soc/codecs/rt5514.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-)