diff mbox

[2/3] ASoC: Intel: Skylake: Reset DSP pipe in skl_pcm_hw_free

Message ID 1522651550-27236-3-git-send-email-sriramx.periyasamy@intel.com (mailing list archive)
State Accepted
Commit 179c2e86328c3d7e07f87f9c45a216cda626e9ee
Headers show

Commit Message

Sriram Periyasamy April 2, 2018, 6:45 a.m. UTC 
From: Divya Prakash <divya1.prakash@intel.com>

Currently during destroy pipeline the gateway is disabled
before DMA completion. This leads to improper draining of
data and subsequently causing issues on HD-Audio DMA.
Hence added a new pipe reset IPC in skl_pcm_hw_free in
which the Gateway Enable(GEN bit) is reset to 0 after
DMA completion in skl_pcm_trigger.

Signed-off-by: Divya Prakash <divya1.prakash@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
---
 sound/soc/intel/skylake/skl-pcm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox

Patch

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 5ac0a12007c2..afa86b9e4dcf 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -382,9 +382,21 @@  static int skl_pcm_hw_free(struct snd_pcm_substream *substream,
 {
 	struct hdac_ext_bus *ebus = dev_get_drvdata(dai->dev);
 	struct hdac_ext_stream *stream = get_hdac_ext_stream(substream);
+	struct skl *skl = get_skl_ctx(dai->dev);
+	struct skl_module_cfg *mconfig;
+	int ret;
 
 	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
 
+	mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream);
+
+	if (mconfig) {
+		ret = skl_reset_pipe(skl->skl_sst, mconfig->pipe);
+		if (ret < 0)
+			dev_err(dai->dev, "%s:Reset failed ret =%d",
+						__func__, ret);
+	}
+
 	snd_hdac_stream_cleanup(hdac_stream(stream));
 	hdac_stream(stream)->prepared = 0;