diff mbox series

[v5] ASoC: Add MediaTek MT6660 Speaker Amp Driver

Message ID 1578644496-16575-1-git-send-email-richtek.jeff.chang@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v5] ASoC: Add MediaTek MT6660 Speaker Amp Driver | expand

Commit Message

Jeff Chang Jan. 10, 2020, 8:21 a.m. UTC
From: Jeff Chang <jeff_chang@richtek.com>

The MT6660 is a boosted BTL class-D amplifier with V/I sensing.
A built-in DC-DC step-up converter is used to provide efficient
power for class-D amplifier with multi-level class-G operation.
The digital audio interface supports I2S, left-justified,
right-justified, TDM and DSP A/B format for audio in with a data
out used for chip information like voltage sense and current
sense, which are able to be monitored via DATAO through proper

Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
---
 Documentation/devicetree/bindings/sound/mt6660.txt |  53 ++
 sound/soc/codecs/Kconfig                           |  11 +
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/mt6660.c                          | 642 +++++++++++++++++++++
 sound/soc/codecs/mt6660.h                          |  77 +++
 5 files changed, 785 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/mt6660.txt
 create mode 100644 sound/soc/codecs/mt6660.c
 create mode 100644 sound/soc/codecs/mt6660.h

changelogs between v5 & v4
	- remove redundant initialization.
	- use packed structures.
	- remove useless switch case.
	- take care of memory allocation failures.

changelogs between v4 & v3
        - remove unnecessary kcontrols.
        - modify copy right header.
        - use dev_dbg instead of dev_info.
        - add necessary debug message.
        - add DT binding documentation.
        - add space before } at every table.

changelogs between v3 & v2

        - modify MT6660 Kconfig, remove unnecessary selection.
        - remove my own debug io interface. use standard regmap for debugging.
        - remove regmap volatile ops, we do not use cache.
        - remove component io read/write function, use snd_soc_component_init_regmap.
        - remove init setting write code. Using parsing dts to set them.
        - remove unnecessary pr_info log message.
        - remove mt6660_component_put_volsw. Using snd_soc_get_volsw.

Comments

Mark Brown Jan. 13, 2020, 3:53 p.m. UTC | #1
On Fri, Jan 10, 2020 at 04:21:36PM +0800, Jeff Chang wrote:

> +	- rt,init_setting_num : The initial register setting element number.
> +
> +	- rt,init_setting_addr : the addreses array for INIT Setting table.
> +
> +	- rt,init_setting_mask : the mask array for INIT Setting table.
> +
> +	- rt,init_setting_val : the value array for INIT Setting table.

I'm not 100% clear what this is indended to be used for but given
that it's just raw register writes it's hard to see how it can be
used well in a general driver - it basically means we have no
idea how the chip might be configured in any given system which
*might* be fine but it could break some assumption the driver
makes about the state of the system on some particular OS or
version.  If there are some system specific tuning parameters
that need to be set as raw values it would be safer to do that by
just including the data in DT (eg, "X bytes of data to be written
starting at register Y to tune component Z" type stuff) or by
exposing individual parameters for things that are documentable.
Allowing a completely unconstrained sequence of register writes
doesn't seem like a good idea.

If possible it might be best to send a version of the driver that
doesn't let this stuff be configured at all then a patch on top
of that which configures all this stuff, the rest of the driver
looks good now.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/mt6660.txt b/Documentation/devicetree/bindings/sound/mt6660.txt
new file mode 100644
index 0000000..2a1736b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6660.txt
@@ -0,0 +1,53 @@ 
+MT6660 MediaTek Speaker Amplifier
+
+This device supports I2C mode only.
+
+Required properties:
+
+	- compatible : "mediatek,mt6660"
+	
+	- reg : The I2C slave address
+
+Optional properties:
+
+	- rt,init_setting_num : The initial register setting element number.
+
+	- rt,init_setting_addr : the addreses array for INIT Setting table.
+
+	- rt,init_setting_mask : the mask array for INIT Setting table.
+
+	- rt,init_setting_val : the value array for INIT Setting table.
+
+Example:
+
+	mt6660@34 {
+		status = "ok";
+		compatible = "mediatek,mt6660";
+		reg = <0x34>;
+		rt,init_setting_num = <26>;
+		rt,init_setting_addr =
+			<0x20 0x30 0x50 0xB1
+			 0xD3 0xE0 0x98 0xB9
+			 0xB7 0xB6 0x6B 0x07
+			 0xBB 0x69 0xBD 0x70
+			 0x7C 0x46 0x1A 0x1B
+			 0x51 0xA2 0x33 0x4C
+			 0x15 0x68>;
+		rt,init_setting_mask =
+			<0x80 0x01 0x1c 0x0c
+			 0x03 0x01 0x44 0xff
+			 0x7777 0x07 0xe0 0xff
+			 0xff 0xff 0xffff 0xff
+			 0xff 0xff 0xffffffff 0xffffffff
+			 0xff 0xff 0xffff 0xffff
+			 0x1800 0x1f>;
+		rt,init_setting_val =
+			<0x00 0x00 0x04 0x00
+			 0x03 0x00 0x04 0x82
+			 0x7273 0x03 0x20 0x70
+			 0x20 0x40 0x17f8 0x15
+			 0x00 0x1d 0x7fdb7ffe 0x7fdb7ffe
+			 0x58 0xce 0x7fff 0x0116
+			 0x0800 0x07>;
+	};
+
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 229cc89..f135fbb 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -122,6 +122,7 @@  config SND_SOC_ALL_CODECS
 	select SND_SOC_ML26124 if I2C
 	select SND_SOC_MT6351 if MTK_PMIC_WRAP
 	select SND_SOC_MT6358 if MTK_PMIC_WRAP
+	select SND_SOC_MT6660 if I2C
 	select SND_SOC_NAU8540 if I2C
 	select SND_SOC_NAU8810 if I2C
 	select SND_SOC_NAU8822 if I2C
@@ -1465,6 +1466,16 @@  config SND_SOC_MT6358
 	  Enable support for the platform which uses MT6358 as
 	  external codec device.
 
+config SND_SOC_MT6660
+	tristate "Mediatek MT6660 Speaker Amplifier"
+	depends on I2C
+	help
+	  MediaTek MT6660 is a smart power amplifier which contain
+	  speaker protection, multi-band DRC, equalizer functions.
+	  Select N if you don't have MT6660 on board.
+	  Select M to build this as module.
+
+
 config SND_SOC_NAU8540
        tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
        depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index c498373..2b6814c 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -119,6 +119,7 @@  snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
 snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o
 snd-soc-mt6351-objs := mt6351.o
 snd-soc-mt6358-objs := mt6358.o
+snd-soc-mt6660-objs := mt6660.o
 snd-soc-nau8540-objs := nau8540.o
 snd-soc-nau8810-objs := nau8810.o
 snd-soc-nau8822-objs := nau8822.o
@@ -403,6 +404,7 @@  obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
 obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o
 obj-$(CONFIG_SND_SOC_MT6351)	+= snd-soc-mt6351.o
 obj-$(CONFIG_SND_SOC_MT6358)	+= snd-soc-mt6358.o
+obj-$(CONFIG_SND_SOC_MT6660)	+= snd-soc-mt6660.o
 obj-$(CONFIG_SND_SOC_NAU8540)   += snd-soc-nau8540.o
 obj-$(CONFIG_SND_SOC_NAU8810)   += snd-soc-nau8810.o
 obj-$(CONFIG_SND_SOC_NAU8822)   += snd-soc-nau8822.o
diff --git a/sound/soc/codecs/mt6660.c b/sound/soc/codecs/mt6660.c
new file mode 100644
index 0000000..5f79044
--- /dev/null
+++ b/sound/soc/codecs/mt6660.c
@@ -0,0 +1,642 @@ 
+// SPDX-License-Identifier: GPL-2.0 //
+
+// Copyright (c) 2019 MediaTek Inc.
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <sound/pcm_params.h>
+#include <linux/debugfs.h>
+
+#include "mt6660.h"
+
+#pragma pack(push, 1)
+struct codec_reg_val {
+	u32 addr;
+	u32 mask;
+	u32 data;
+};
+
+struct reg_size_table {
+	u32 addr;
+	u8 size;
+};
+#pragma pack(pop)
+
+static const struct reg_size_table mt6660_reg_size_table[] = {
+	{ MT6660_REG_HPF1_COEF, 4 },
+	{ MT6660_REG_HPF2_COEF, 4 },
+	{ MT6660_REG_TDM_CFG3, 2 },
+	{ MT6660_REG_RESV17, 2 },
+	{ MT6660_REG_RESV23, 2 },
+	{ MT6660_REG_SIGMAX, 2 },
+	{ MT6660_REG_DEVID, 2 },
+	{ MT6660_REG_HCLIP_CTRL, 2 },
+	{ MT6660_REG_DA_GAIN, 2 },
+};
+
+static int mt6660_get_reg_size(uint32_t addr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mt6660_reg_size_table); i++) {
+		if (mt6660_reg_size_table[i].addr == addr)
+			return mt6660_reg_size_table[i].size;
+	}
+	return 1;
+}
+
+static int mt6660_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct mt6660_chip *chip = context;
+	int size = mt6660_get_reg_size(reg);
+	u8 reg_data[4];
+	int i, ret;
+
+	for (i = 0; i < size; i++)
+		reg_data[size - i - 1] = (val >> (8 * i)) & 0xff;
+
+	ret = i2c_smbus_write_i2c_block_data(chip->i2c, reg, size, reg_data);
+	return ret;
+}
+
+static int mt6660_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct mt6660_chip *chip = context;
+	int size = mt6660_get_reg_size(reg);
+	int i, ret;
+	u8 data[4];
+	u32 reg_data = 0;
+
+	ret = i2c_smbus_read_i2c_block_data(chip->i2c, reg, size, data);
+	if (ret < 0)
+		return ret;
+	for (i = 0; i < size; i++) {
+		reg_data <<= 8;
+		reg_data |= data[i];
+	}
+	*val = reg_data;
+	return 0;
+}
+
+static struct regmap_config mt6660_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_write = mt6660_reg_write,
+	.reg_read = mt6660_reg_read,
+};
+
+static int mt6660_codec_dac_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+
+	if (event == SND_SOC_DAPM_POST_PMU)
+		usleep_range(1000, 1100);
+	return 0;
+}
+
+static int mt6660_codec_classd_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	int ret;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		dev_dbg(component->dev,
+			"%s: before classd turn on\n", __func__);
+		/* config to adaptive mode */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_BST_CTRL, 0x03, 0x03);
+		if (ret < 0) {
+			dev_err(component->dev, "config mode adaptive fail\n");
+			return ret;
+		}
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		/* voltage sensing enable */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_RESV7, 0x04, 0x04);
+		if (ret < 0) {
+			dev_err(component->dev,
+				"enable voltage sensing fail\n");
+			return ret;
+		}
+		dev_dbg(component->dev, "Amp on\n");
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		dev_dbg(component->dev, "Amp off\n");
+		/* voltage sensing disable */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_RESV7, 0x04, 0x00);
+		if (ret < 0) {
+			dev_err(component->dev,
+				"disable voltage sensing fail\n");
+			return ret;
+		}
+		/* pop-noise improvement 1 */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_RESV10, 0x10, 0x10);
+		if (ret < 0) {
+			dev_err(component->dev,
+				"pop-noise improvement 1 fail\n");
+			return ret;
+		}
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		dev_dbg(component->dev,
+			"%s: after classd turn off\n", __func__);
+		/* pop-noise improvement 2 */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_RESV10, 0x10, 0x00);
+		if (ret < 0) {
+			dev_err(component->dev,
+				"pop-noise improvement 2 fail\n");
+			return ret;
+		}
+		/* config to off mode */
+		ret = snd_soc_component_update_bits(component,
+			MT6660_REG_BST_CTRL, 0x03, 0x00);
+		if (ret < 0) {
+			dev_err(component->dev, "config mode off fail\n");
+			return ret;
+		}
+		break;
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget mt6660_component_dapm_widgets[] = {
+	SND_SOC_DAPM_DAC_E("DAC", NULL, MT6660_REG_PLL_CFG1,
+		0, 1, mt6660_codec_dac_event, SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_ADC("VI ADC", NULL, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_PGA("PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_OUT_DRV_E("ClassD", MT6660_REG_SYSTEM_CTRL, 2, 0,
+			       NULL, 0, mt6660_codec_classd_event,
+			       SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+			       SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUTPUT("OUTP"),
+	SND_SOC_DAPM_OUTPUT("OUTN"),
+};
+
+static const struct snd_soc_dapm_route mt6660_component_dapm_routes[] = {
+	{ "DAC", NULL, "aif_playback" },
+	{ "PGA", NULL, "DAC" },
+	{ "ClassD", NULL, "PGA" },
+	{ "OUTP", NULL, "ClassD" },
+	{ "OUTN", NULL, "ClassD" },
+	{ "VI ADC", NULL, "ClassD" },
+	{ "aif_capture", NULL, "VI ADC" },
+};
+
+static int mt6660_component_get_volsw(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct mt6660_chip *chip = (struct mt6660_chip *)
+		snd_soc_component_get_drvdata(component);
+	int ret = -EINVAL;
+
+	if (!strcmp(kcontrol->id.name, "Chip Rev")) {
+		ucontrol->value.integer.value[0] = chip->chip_rev & 0x0f;
+		ret = 0;
+	}
+	return ret;
+}
+
+static const DECLARE_TLV_DB_SCALE(vol_ctl_tlv, -1155, 5, 0);
+
+static const struct snd_kcontrol_new mt6660_component_snd_controls[] = {
+	SOC_SINGLE_TLV("Digital Volume", MT6660_REG_VOL_CTRL, 0, 255,
+			   1, vol_ctl_tlv),
+	SOC_SINGLE("Hard Clip Switch", MT6660_REG_HCLIP_CTRL, 8, 1, 0),
+	SOC_SINGLE("Clip Switch", MT6660_REG_SPS_CTRL, 0, 1, 0),
+	SOC_SINGLE("Boost Mode", MT6660_REG_BST_CTRL, 0, 3, 0),
+	SOC_SINGLE("DRE Switch", MT6660_REG_DRE_CTRL, 0, 1, 0),
+	SOC_SINGLE("DC Protect Switch",	MT6660_REG_DC_PROTECT_CTRL, 3, 1, 0),
+	SOC_SINGLE("Data Output Left Channel Selection",
+		   MT6660_REG_DATAO_SEL, 3, 7, 0),
+	SOC_SINGLE("Data Output Right Channel Selection",
+		   MT6660_REG_DATAO_SEL, 0, 7, 0),
+	SOC_SINGLE_EXT("T0 SEL", MT6660_REG_CALI_T0, 0, 7, 0,
+		       snd_soc_get_volsw, NULL),
+	SOC_SINGLE_EXT("Chip Rev", MT6660_REG_DEVID, 8, 15, 0,
+		       mt6660_component_get_volsw, NULL),
+};
+
+static int _mt6660_chip_power_on(struct mt6660_chip *chip, int on_off)
+{
+	u8 reg_data;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(chip->i2c, MT6660_REG_SYSTEM_CTRL);
+	if (ret < 0)
+		return ret;
+	reg_data = (u8)ret;
+	if (on_off)
+		reg_data &= (~0x01);
+	else
+		reg_data |= 0x01;
+	return regmap_write(chip->regmap, MT6660_REG_SYSTEM_CTRL, reg_data);
+}
+
+static int mt6660_apply_plat_data(struct mt6660_chip *chip,
+		struct snd_soc_component *component)
+{
+	size_t i;
+	int num = chip->plat_data.init_setting_num;
+	int ret;
+
+	ret = _mt6660_chip_power_on(chip, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s power on failed\n", __func__);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		ret = snd_soc_component_update_bits(component,
+				chip->plat_data.init_setting_addr[i],
+				chip->plat_data.init_setting_mask[i],
+				chip->plat_data.init_setting_val[i]);
+		if (ret < 0)
+			return ret;
+	}
+	ret = _mt6660_chip_power_on(chip, 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s power on failed\n", __func__);
+		return ret;
+	}
+	return 0;
+}
+
+static int mt6660_component_probe(struct snd_soc_component *component)
+{
+	struct mt6660_chip *chip = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	dev_dbg(component->dev, "%s\n", __func__);
+	snd_soc_component_init_regmap(component, chip->regmap);
+
+	ret = mt6660_apply_plat_data(chip, component);
+	if (ret < 0)
+		dev_err(chip->dev, "mt6660 apply plat data failed\n");
+
+	return ret;
+}
+
+static void mt6660_component_remove(struct snd_soc_component *component)
+{
+	dev_dbg(component->dev, "%s\n", __func__);
+	snd_soc_component_exit_regmap(component);
+}
+
+static const struct snd_soc_component_driver mt6660_component_driver = {
+	.probe = mt6660_component_probe,
+	.remove = mt6660_component_remove,
+
+	.controls = mt6660_component_snd_controls,
+	.num_controls = ARRAY_SIZE(mt6660_component_snd_controls),
+	.dapm_widgets = mt6660_component_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mt6660_component_dapm_widgets),
+	.dapm_routes = mt6660_component_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(mt6660_component_dapm_routes),
+
+	.idle_bias_on = false, /* idle_bias_off = true */
+};
+
+static int mt6660_component_aif_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *dai)
+{
+	int word_len = params_physical_width(hw_params);
+	int aud_bit = params_width(hw_params);
+	u16 reg_data = 0;
+	int ret;
+
+	dev_dbg(dai->dev, "%s: ++\n", __func__);
+	dev_dbg(dai->dev, "format: 0x%08x\n", params_format(hw_params));
+	dev_dbg(dai->dev, "rate: 0x%08x\n", params_rate(hw_params));
+	dev_dbg(dai->dev, "word_len: %d, aud_bit: %d\n", word_len, aud_bit);
+	if (word_len > 32 || word_len < 16) {
+		dev_err(dai->dev, "not supported word length\n");
+		return -ENOTSUPP;
+	}
+	switch (aud_bit) {
+	case 16:
+		reg_data = 3;
+		break;
+	case 18:
+		reg_data = 2;
+		break;
+	case 20:
+		reg_data = 1;
+		break;
+	case 24:
+	case 32:
+		reg_data = 0;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+	ret = snd_soc_component_update_bits(dai->component,
+		MT6660_REG_SERIAL_CFG1, 0xc0, (reg_data << 6));
+	if (ret < 0) {
+		dev_err(dai->dev, "config aud bit fail\n");
+		return ret;
+	}
+	ret = snd_soc_component_update_bits(dai->component,
+		MT6660_REG_TDM_CFG3, 0x3f0, word_len << 4);
+	if (ret < 0) {
+		dev_err(dai->dev, "config word len fail\n");
+		return ret;
+	}
+	dev_dbg(dai->dev, "%s: --\n", __func__);
+	return 0;
+}
+
+static const struct snd_soc_dai_ops mt6660_component_aif_ops = {
+	.hw_params = mt6660_component_aif_hw_params,
+};
+
+#define STUB_RATES	SNDRV_PCM_RATE_8000_192000
+#define STUB_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | \
+			SNDRV_PCM_FMTBIT_U16_LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | \
+			SNDRV_PCM_FMTBIT_U24_LE | \
+			SNDRV_PCM_FMTBIT_S32_LE | \
+			SNDRV_PCM_FMTBIT_U32_LE)
+
+static struct snd_soc_dai_driver mt6660_codec_dai = {
+	.name = "mt6660-aif",
+	.playback = {
+		.stream_name	= "aif_playback",
+		.channels_min	= 1,
+		.channels_max	= 2,
+		.rates		= STUB_RATES,
+		.formats	= STUB_FORMATS,
+	},
+	.capture = {
+		.stream_name	= "aif_capture",
+		.channels_min	= 1,
+		.channels_max	= 2,
+		.rates = STUB_RATES,
+		.formats = STUB_FORMATS,
+	},
+	/* dai properties */
+	.symmetric_rates = 1,
+	.symmetric_channels = 1,
+	.symmetric_samplebits = 1,
+	/* dai operations */
+	.ops = &mt6660_component_aif_ops,
+};
+
+static inline int _mt6660_chip_id_check(struct mt6660_chip *chip)
+{
+	u8 id[2];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(chip->i2c, MT6660_REG_DEVID, 2, id);
+	if (ret < 0)
+		return ret;
+	ret = (id[0] << 8) + id[1];
+	ret &= 0x0ff0;
+	if (ret != 0x00e0 && ret != 0x01e0) {
+		dev_err(chip->dev, "%s id(%x) not match\n", __func__, ret);
+		return -ENODEV;
+	}
+	return ret;
+}
+
+static inline int _mt6660_chip_sw_reset(struct mt6660_chip *chip)
+{
+	int ret;
+
+	/* turn on main pll first, then trigger reset */
+	ret = regmap_write(chip->regmap, 0x03, 0x00);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(chip->regmap, MT6660_REG_SYSTEM_CTRL, 0x80);
+	if (ret < 0)
+		return ret;
+	msleep(30);
+	return 0;
+}
+
+static inline int _mt6660_read_chip_revision(struct mt6660_chip *chip)
+{
+	u8 reg_data[2];
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(
+		chip->i2c, MT6660_REG_DEVID, 2, reg_data);
+	if (ret < 0) {
+		dev_err(chip->dev, "get chip revision fail\n");
+		return ret;
+	}
+	chip->chip_rev = reg_data[1];
+	return 0;
+}
+
+static int mt6660_parse_dt(struct mt6660_chip *chip, struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	u32 val;
+	size_t i;
+
+	if (!np) {
+		dev_err(dev, "no device node\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "rt,init_setting_num", &val)) {
+		dev_err(dev, "no init setting\n");
+		chip->plat_data.init_setting_num = 0;
+	} else {
+		chip->plat_data.init_setting_num = val;
+	}
+
+	if (chip->plat_data.init_setting_num) {
+		chip->plat_data.init_setting_addr =
+			devm_kzalloc(dev, sizeof(u32) *
+			chip->plat_data.init_setting_num, GFP_KERNEL);
+		if (!chip->plat_data.init_setting_addr) {
+			dev_err(dev, "%s addr memory alloc failed\n", __func__);
+			return -ENOMEM;
+		}
+		chip->plat_data.init_setting_mask =
+			devm_kzalloc(dev, sizeof(u32) *
+			chip->plat_data.init_setting_num, GFP_KERNEL);
+		if (!chip->plat_data.init_setting_mask) {
+			dev_err(dev, "%s mask memory alloc failed\n", __func__);
+			return -ENOMEM;
+		}
+		chip->plat_data.init_setting_val =
+			devm_kzalloc(dev, sizeof(u32) *
+			chip->plat_data.init_setting_num, GFP_KERNEL);
+		if (!chip->plat_data.init_setting_val) {
+			dev_err(dev, "%s val memory alloc failed\n", __func__);
+			return -ENOMEM;
+		}
+
+		if (of_property_read_u32_array(np, "rt,init_setting_addr",
+					chip->plat_data.init_setting_addr,
+					chip->plat_data.init_setting_num)) {
+			dev_err(dev, "no init setting addr\n");
+		}
+		if (of_property_read_u32_array(np, "rt,init_setting_mask",
+					chip->plat_data.init_setting_mask,
+					chip->plat_data.init_setting_num)) {
+			dev_err(dev, "no init setting mask\n");
+		}
+		if (of_property_read_u32_array(np, "rt,init_setting_val",
+					chip->plat_data.init_setting_val,
+					chip->plat_data.init_setting_num)) {
+			dev_err(dev, "no init setting val\n");
+		}
+	}
+
+	dev_dbg(dev, "%s, init stting table, num = %d\n", __func__,
+		chip->plat_data.init_setting_num);
+	for (i = 0; i < chip->plat_data.init_setting_num; i++) {
+		dev_dbg(dev, "0x%02x, 0x%08x, 0x%08x\n",
+				chip->plat_data.init_setting_addr[i],
+				chip->plat_data.init_setting_mask[i],
+				chip->plat_data.init_setting_val[i]);
+	}
+	return 0;
+}
+
+static int mt6660_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct mt6660_chip *chip = NULL;
+	int ret;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	chip->i2c = client;
+	chip->dev = &client->dev;
+	mutex_init(&chip->io_lock);
+	i2c_set_clientdata(client, chip);
+
+	ret = mt6660_parse_dt(chip, &client->dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "parsing dts failed\n");
+		return ret;
+	}
+
+	chip->regmap = devm_regmap_init(&client->dev,
+		NULL, chip, &mt6660_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(&client->dev, "failed to initialise regmap: %d\n", ret);
+		return ret;
+	}
+
+	/* chip reset first */
+	ret = _mt6660_chip_sw_reset(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "chip reset fail\n");
+		goto probe_fail;
+	}
+	/* chip power on */
+	ret = _mt6660_chip_power_on(chip, 1);
+	if (ret < 0) {
+		dev_err(chip->dev, "chip power on 2 fail\n");
+		goto probe_fail;
+	}
+	/* chip devid check */
+	ret = _mt6660_chip_id_check(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "chip id check fail\n");
+		goto probe_fail;
+	}
+	/* chip revision get */
+	ret = _mt6660_read_chip_revision(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "read chip revision fail\n");
+		goto probe_fail;
+	}
+	pm_runtime_set_active(chip->dev);
+	pm_runtime_enable(chip->dev);
+
+	ret = devm_snd_soc_register_component(chip->dev,
+					       &mt6660_component_driver,
+					       &mt6660_codec_dai, 1);
+	return ret;
+probe_fail:
+	_mt6660_chip_power_on(chip, 0);
+	mutex_destroy(&chip->io_lock);
+	return ret;
+}
+
+static int mt6660_i2c_remove(struct i2c_client *client)
+{
+	struct mt6660_chip *chip = i2c_get_clientdata(client);
+
+	pm_runtime_disable(chip->dev);
+	pm_runtime_set_suspended(chip->dev);
+	mutex_destroy(&chip->io_lock);
+	return 0;
+}
+
+static int __maybe_unused mt6660_i2c_runtime_suspend(struct device *dev)
+{
+	struct mt6660_chip *chip = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "enter low power mode\n");
+	return regmap_update_bits(chip->regmap,
+		MT6660_REG_SYSTEM_CTRL, 0x01, 0x01);
+}
+
+static int __maybe_unused mt6660_i2c_runtime_resume(struct device *dev)
+{
+	struct mt6660_chip *chip = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "exit low power mode\n");
+	return regmap_update_bits(chip->regmap,
+		MT6660_REG_SYSTEM_CTRL, 0x01, 0x00);
+}
+
+static const struct dev_pm_ops mt6660_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(mt6660_i2c_runtime_suspend,
+			   mt6660_i2c_runtime_resume, NULL)
+};
+
+static const struct of_device_id __maybe_unused mt6660_of_id[] = {
+	{ .compatible = "mediatek,mt6660",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6660_of_id);
+
+static const struct i2c_device_id mt6660_i2c_id[] = {
+	{"mt6660", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, mt6660_i2c_id);
+
+static struct i2c_driver mt6660_i2c_driver = {
+	.driver = {
+		.name = "mt6660",
+		.of_match_table = of_match_ptr(mt6660_of_id),
+		.pm = &mt6660_dev_pm_ops,
+	},
+	.probe = mt6660_i2c_probe,
+	.remove = mt6660_i2c_remove,
+	.id_table = mt6660_i2c_id,
+};
+module_i2c_driver(mt6660_i2c_driver);
+
+MODULE_AUTHOR("Jeff Chang <jeff_chang@richtek.com>");
+MODULE_DESCRIPTION("MT6660 SPKAMP Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.7_G");
diff --git a/sound/soc/codecs/mt6660.h b/sound/soc/codecs/mt6660.h
new file mode 100644
index 0000000..054a3c5
--- /dev/null
+++ b/sound/soc/codecs/mt6660.h
@@ -0,0 +1,77 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __SND_SOC_MT6660_H
+#define __SND_SOC_MT6660_H
+
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#pragma pack(push, 1)
+struct mt6660_platform_data {
+	u8 init_setting_num;
+	u32 *init_setting_addr;
+	u32 *init_setting_mask;
+	u32 *init_setting_val;
+};
+
+struct mt6660_chip {
+	struct i2c_client *i2c;
+	struct device *dev;
+	struct platform_device *param_dev;
+	struct mt6660_platform_data plat_data;
+	struct mutex io_lock;
+	struct regmap *regmap;
+	u16 chip_rev;
+};
+#pragma pack(pop)
+
+#define MT6660_REG_DEVID		(0x00)
+#define MT6660_REG_SYSTEM_CTRL		(0x03)
+#define MT6660_REG_IRQ_STATUS1		(0x05)
+#define MT6660_REG_ADDA_CLOCK		(0x07)
+#define MT6660_REG_SERIAL_CFG1		(0x10)
+#define MT6660_REG_DATAO_SEL		(0x12)
+#define MT6660_REG_TDM_CFG3		(0x15)
+#define MT6660_REG_HPF_CTRL		(0x18)
+#define MT6660_REG_HPF1_COEF		(0x1A)
+#define MT6660_REG_HPF2_COEF		(0x1B)
+#define MT6660_REG_PATH_BYPASS		(0x1E)
+#define MT6660_REG_WDT_CTRL		(0x20)
+#define MT6660_REG_HCLIP_CTRL		(0x24)
+#define MT6660_REG_VOL_CTRL		(0x29)
+#define MT6660_REG_SPS_CTRL		(0x30)
+#define MT6660_REG_SIGMAX		(0x33)
+#define MT6660_REG_CALI_T0		(0x3F)
+#define MT6660_REG_BST_CTRL		(0x40)
+#define MT6660_REG_PROTECTION_CFG	(0x46)
+#define MT6660_REG_DA_GAIN		(0x4c)
+#define MT6660_REG_AUDIO_IN2_SEL	(0x50)
+#define MT6660_REG_SIG_GAIN		(0x51)
+#define MT6660_REG_PLL_CFG1		(0x60)
+#define MT6660_REG_DRE_CTRL		(0x68)
+#define MT6660_REG_DRE_THDMODE		(0x69)
+#define MT6660_REG_DRE_CORASE		(0x6B)
+#define MT6660_REG_PWM_CTRL		(0x70)
+#define MT6660_REG_DC_PROTECT_CTRL	(0x74)
+#define MT6660_REG_ADC_USB_MODE		(0x7c)
+#define MT6660_REG_INTERNAL_CFG		(0x88)
+#define MT6660_REG_RESV0		(0x98)
+#define MT6660_REG_RESV1		(0x99)
+#define MT6660_REG_RESV2		(0x9A)
+#define MT6660_REG_RESV3		(0x9B)
+#define MT6660_REG_RESV6		(0xA2)
+#define MT6660_REG_RESV7		(0xA3)
+#define MT6660_REG_RESV10		(0xB0)
+#define MT6660_REG_RESV11		(0xB1)
+#define MT6660_REG_RESV16		(0xB6)
+#define MT6660_REG_RESV17		(0xB7)
+#define MT6660_REG_RESV19		(0xB9)
+#define MT6660_REG_RESV21		(0xBB)
+#define MT6660_REG_RESV23		(0xBD)
+#define MT6660_REG_RESV31		(0xD3)
+#define MT6660_REG_RESV40		(0xE0)
+
+#endif /* __SND_SOC_MT6660_H */