@@ -37,10 +37,21 @@ Optional properties:
- realtek,jd-src
0: No JD is used
1: using JD3 as JD source
+ 2: JD source for Intel HDA header
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+- sound-name-prefix: Please refer to name-prefix.txt
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+ interfaces on Codec side can be described under 'ports' or 'port'.
+ When the SoC or host device is connected to multiple interfaces of
+ the Codec, the connectivity can be described using 'ports' property.
+ If a single interface is used, then 'port' can be used. The usage
+ depends on the platform or board design.
+ Please refer to Documentation/devicetree/bindings/graph.txt
+
Pins on the device (for linking into audio routes) for RT5659/RT5658:
* DMIC L1
Update following in rt5659.txt binding doc - Add JD source for Intel HDA header: Commit 041e74b71491 ("ASoC: rt5659: Add the support of Intel HDA Header") added driver support. Add missing info here. - sound-name-prefix: Used to prefix component widgets/kcontrols with given prefix. - ports: Helps to use the Codec with audio graph card Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: Oder Chiou <oder_chiou@realtek.com> Cc: Bard Liao <bardliao@realtek.com> --- Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)