| Message ID | 1638459806-27600-9-git-send-email-srivasam@codeaurora.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for audio on SC7280 based targets | expand |
On Thu, 02 Dec 2021 21:13:24 +0530, Srinivasa Rao Mandadapu wrote: > From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > > Add bindings for sc7280 lpass cpu driver which supports > audio over i2s based speaker, soundwire based headset, msm dmics > and HDMI Port. > > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> > Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> > --- > .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 70 +++++++++++++++++++--- > 1 file changed, 62 insertions(+), 8 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: reg: [[0, 1658351616, 0, 425984], [0, 1659895808, 0, 167936]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: reg-names: ['lpass-hdmiif', 'lpass-lpaif'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: interrupts: [[0, 160, 1], [0, 268, 1]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: interrupt-names: ['lpass-irq-lpaif', 'lpass-irq-hdmi'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: lpass@62d80000: iommus: [[4294967295, 4128, 0], [4294967295, 4146, 0]] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1562819 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 1e23c0e..efaaa8ea 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -22,35 +22,36 @@ properties: - qcom,lpass-cpu - qcom,apq8016-lpass-cpu - qcom,sc7180-lpass-cpu + - qcom,sc7280-lpass-cpu reg: - maxItems: 2 + maxItems: 5 description: LPAIF core registers reg-names: - maxItems: 2 + maxItems: 5 clocks: minItems: 3 - maxItems: 6 + maxItems: 7 clock-names: minItems: 3 - maxItems: 6 + maxItems: 7 interrupts: - maxItems: 2 + maxItems: 4 description: LPAIF DMA buffer interrupt interrupt-names: - maxItems: 2 + maxItems: 4 qcom,adsp: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle for the audio DSP node iommus: - maxItems: 2 + maxItems: 3 description: Phandle to apps_smmu node with sid mask power-domains: @@ -69,7 +70,7 @@ patternProperties: "^dai-link@[0-9a-f]$": type: object description: | - LPASS CPU dai node for each I2S device. Bindings of each node + LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node depends on the specific driver providing the functionality and properties. properties: @@ -174,6 +175,59 @@ allOf: - iommus - power-domains + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpass-cpu + + then: + properties: + clock-names: + oneOf: + - items: #for I2S + - const: aon_cc_audio_hm_h + - const: core_cc_sysnoc_mport_core + - const: core_cc_ext_if1_ibit + - items: #for Soundwire + - const: aon_cc_audio_hm_h + - const: audio_cc_codec_mem0 + - const: audio_cc_codec_mem1 + - const: audio_cc_codec_mem2 + - items: #for HDMI + - const: aon_cc_audio_hm_h + + reg-names: + anyOf: + - items: #for I2S + - const: lpass-lpaif + - items: #for I2S and HDMI + - const: lpass-hdmiif + - const: lpass-lpaif + - items: #for I2S, soundwire and HDMI + - const: lpass-hdmiif + - const: lpass-lpaif + - const: lpass-rxtx-cdc-dma-lpm + - const: lpass-rxtx-lpaif + - const: lpass-va-lpaif + - const: lpass-va-cdc-dma-lpm + interrupt-names: + anyOf: + - items: #for I2S + - const: lpass-irq-lpaif + - items: #for I2S and HDMI + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi + - items: #for I2S, soundwire and HDMI + - const: lpass-irq-lpaif + - const: lpass-irq-hdmi + - const: lpass-irq-vaif + - const: lpass-irq-rxtxif + + required: + - iommus + - power-domains + examples: - | #include <dt-bindings/sound/sc7180-lpass.h>