Message ID | 1646737394-4740-5-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add pin control support for lpass sc7280 | expand |
On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote: > Update lpi group structure with core group_desc structure > to avoid redundant struct params. > This fails to express why you're doing that, please see below. > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > --- > drivers/pinctrl/qcom/Kconfig | 1 + > drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++----------------- > 2 files changed, 22 insertions(+), 23 deletions(-) > > diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig > index ca6f68a..31c4aa6 100644 > --- a/drivers/pinctrl/qcom/Kconfig > +++ b/drivers/pinctrl/qcom/Kconfig > @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI > select PINMUX > select PINCONF > select GENERIC_PINCONF > + select GENERIC_PINCTRL_GROUPS This allow you to use struct group_desc, but what does that give you? I don't see a change where you're moving to use the common group_desc helpers that the framework supplies. Without that this just replace 3 entries in struct lpi_pingroup with 4 entries in struct group_desc. Change looks good, iff it's followed by a transition to replace the driver's custom functions with pinctrl_generic_get_group_*(). Regards, Bjorn > depends on GPIOLIB > help > This is the pinctrl, pinmux, pinconf and gpiolib driver for the > diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > index 3c15f80..54750ba 100644 > --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > @@ -51,11 +51,11 @@ > > #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ > { \ > - .name = "gpio" #id, \ > - .pins = gpio##id##_pins, \ > + .group.name = "gpio" #id, \ > + .group.pins = gpio##id##_pins, \ > .pin = id, \ > .slew_offset = soff, \ > - .npins = ARRAY_SIZE(gpio##id##_pins), \ > + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ > .funcs = (int[]){ \ > LPI_MUX_gpio, \ > LPI_MUX_##f1, \ > @@ -67,9 +67,7 @@ > } > > struct lpi_pingroup { > - const char *name; > - const unsigned int *pins; > - unsigned int npins; > + struct group_desc group; > unsigned int pin; > /* Bit offset in slew register for SoundWire pins only */ > int slew_offset; > @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { > LPI_MUX__, > }; > > -static const unsigned int gpio0_pins[] = { 0 }; > -static const unsigned int gpio1_pins[] = { 1 }; > -static const unsigned int gpio2_pins[] = { 2 }; > -static const unsigned int gpio3_pins[] = { 3 }; > -static const unsigned int gpio4_pins[] = { 4 }; > -static const unsigned int gpio5_pins[] = { 5 }; > -static const unsigned int gpio6_pins[] = { 6 }; > -static const unsigned int gpio7_pins[] = { 7 }; > -static const unsigned int gpio8_pins[] = { 8 }; > -static const unsigned int gpio9_pins[] = { 9 }; > -static const unsigned int gpio10_pins[] = { 10 }; > -static const unsigned int gpio11_pins[] = { 11 }; > -static const unsigned int gpio12_pins[] = { 12 }; > -static const unsigned int gpio13_pins[] = { 13 }; > +static int gpio0_pins[] = { 0 }; > +static int gpio1_pins[] = { 1 }; > +static int gpio2_pins[] = { 2 }; > +static int gpio3_pins[] = { 3 }; > +static int gpio4_pins[] = { 4 }; > +static int gpio5_pins[] = { 5 }; > +static int gpio6_pins[] = { 6 }; > +static int gpio7_pins[] = { 7 }; > +static int gpio8_pins[] = { 8 }; > +static int gpio9_pins[] = { 9 }; > +static int gpio10_pins[] = { 10 }; > +static int gpio11_pins[] = { 11 }; > +static int gpio12_pins[] = { 12 }; > +static int gpio13_pins[] = { 13 }; > static const char * const swr_tx_clk_groups[] = { "gpio0" }; > static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; > static const char * const swr_rx_clk_groups[] = { "gpio3" }; > @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, > { > struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); > > - return pctrl->data->groups[group].name; > + return pctrl->data->groups[group].group.name; > } > > static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, > @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, > { > struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); > > - *pins = pctrl->data->groups[group].pins; > - *num_pins = pctrl->data->groups[group].npins; > + *pins = pctrl->data->groups[group].group.pins; > + *num_pins = pctrl->data->groups[group].group.num_pins; > > return 0; > } > -- > 2.7.4 >
On 3/8/2022 11:25 PM, Bjorn Andersson wrote: Thanks for Your Time Bjorn!!! > On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote: > >> Update lpi group structure with core group_desc structure >> to avoid redundant struct params. >> > This fails to express why you're doing that, please see below. > >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> --- >> drivers/pinctrl/qcom/Kconfig | 1 + >> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++----------------- >> 2 files changed, 22 insertions(+), 23 deletions(-) >> >> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig >> index ca6f68a..31c4aa6 100644 >> --- a/drivers/pinctrl/qcom/Kconfig >> +++ b/drivers/pinctrl/qcom/Kconfig >> @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI >> select PINMUX >> select PINCONF >> select GENERIC_PINCONF >> + select GENERIC_PINCTRL_GROUPS > This allow you to use struct group_desc, but what does that give you? > > I don't see a change where you're moving to use the common group_desc > helpers that the framework supplies. Without that this just replace 3 > entries in struct lpi_pingroup with 4 entries in struct group_desc. > > > Change looks good, iff it's followed by a transition to replace the > driver's custom functions with pinctrl_generic_get_group_*(). > > Regards, > Bjorn Okay. Will change and re send the patch set. > >> depends on GPIOLIB >> help >> This is the pinctrl, pinmux, pinconf and gpiolib driver for the >> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> index 3c15f80..54750ba 100644 >> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> @@ -51,11 +51,11 @@ >> >> #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ >> { \ >> - .name = "gpio" #id, \ >> - .pins = gpio##id##_pins, \ >> + .group.name = "gpio" #id, \ >> + .group.pins = gpio##id##_pins, \ >> .pin = id, \ >> .slew_offset = soff, \ >> - .npins = ARRAY_SIZE(gpio##id##_pins), \ >> + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ >> .funcs = (int[]){ \ >> LPI_MUX_gpio, \ >> LPI_MUX_##f1, \ >> @@ -67,9 +67,7 @@ >> } >> >> struct lpi_pingroup { >> - const char *name; >> - const unsigned int *pins; >> - unsigned int npins; >> + struct group_desc group; >> unsigned int pin; >> /* Bit offset in slew register for SoundWire pins only */ >> int slew_offset; >> @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { >> LPI_MUX__, >> }; >> >> -static const unsigned int gpio0_pins[] = { 0 }; >> -static const unsigned int gpio1_pins[] = { 1 }; >> -static const unsigned int gpio2_pins[] = { 2 }; >> -static const unsigned int gpio3_pins[] = { 3 }; >> -static const unsigned int gpio4_pins[] = { 4 }; >> -static const unsigned int gpio5_pins[] = { 5 }; >> -static const unsigned int gpio6_pins[] = { 6 }; >> -static const unsigned int gpio7_pins[] = { 7 }; >> -static const unsigned int gpio8_pins[] = { 8 }; >> -static const unsigned int gpio9_pins[] = { 9 }; >> -static const unsigned int gpio10_pins[] = { 10 }; >> -static const unsigned int gpio11_pins[] = { 11 }; >> -static const unsigned int gpio12_pins[] = { 12 }; >> -static const unsigned int gpio13_pins[] = { 13 }; >> +static int gpio0_pins[] = { 0 }; >> +static int gpio1_pins[] = { 1 }; >> +static int gpio2_pins[] = { 2 }; >> +static int gpio3_pins[] = { 3 }; >> +static int gpio4_pins[] = { 4 }; >> +static int gpio5_pins[] = { 5 }; >> +static int gpio6_pins[] = { 6 }; >> +static int gpio7_pins[] = { 7 }; >> +static int gpio8_pins[] = { 8 }; >> +static int gpio9_pins[] = { 9 }; >> +static int gpio10_pins[] = { 10 }; >> +static int gpio11_pins[] = { 11 }; >> +static int gpio12_pins[] = { 12 }; >> +static int gpio13_pins[] = { 13 }; >> static const char * const swr_tx_clk_groups[] = { "gpio0" }; >> static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; >> static const char * const swr_rx_clk_groups[] = { "gpio3" }; >> @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, >> { >> struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); >> >> - return pctrl->data->groups[group].name; >> + return pctrl->data->groups[group].group.name; >> } >> >> static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, >> @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, >> { >> struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); >> >> - *pins = pctrl->data->groups[group].pins; >> - *num_pins = pctrl->data->groups[group].npins; >> + *pins = pctrl->data->groups[group].group.pins; >> + *num_pins = pctrl->data->groups[group].group.num_pins; >> >> return 0; >> } >> -- >> 2.7.4 >>
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index ca6f68a..31c4aa6 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI select PINMUX select PINCONF select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS depends on GPIOLIB help This is the pinctrl, pinmux, pinconf and gpiolib driver for the diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 3c15f80..54750ba 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -51,11 +51,11 @@ #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ .pin = id, \ .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ .funcs = (int[]){ \ LPI_MUX_gpio, \ LPI_MUX_##f1, \ @@ -67,9 +67,7 @@ } struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; + struct group_desc group; unsigned int pin; /* Bit offset in slew register for SoundWire pins only */ int slew_offset; @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { LPI_MUX__, }; -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; static const char * const swr_tx_clk_groups[] = { "gpio0" }; static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; static const char * const swr_rx_clk_groups[] = { "gpio3" }; @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - return pctrl->data->groups[group].name; + return pctrl->data->groups[group].group.name; } static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - *pins = pctrl->data->groups[group].pins; - *num_pins = pctrl->data->groups[group].npins; + *pins = pctrl->data->groups[group].group.pins; + *num_pins = pctrl->data->groups[group].group.num_pins; return 0; }