| Message ID | 1665637711-13300-1-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | c9a3545b1d771fb7b06a487796c40288c02c41c5 |
| Headers | show |
| Series | [v2] ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile | expand |
On Thu, 13 Oct 2022 10:38:31 +0530, Srinivasa Rao Mandadapu wrote: > Update HDMI volatile registers list as DMA, Channel Selection registers, > vbit control registers are being reflected by hardware DP port > disconnection. > > This update is required to fix no display and no sound issue observed > after reconnecting TAMA/SANWA DP cables. > Once DP cable is unplugged, DMA control registers are being reset by > hardware, however at second plugin, new dma control values does not > updated to the dma hardware registers since new register value and > cached values at the time of first plugin are same. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile commit: c9a3545b1d771fb7b06a487796c40288c02c41c5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
Quoting Srinivasa Rao Mandadapu (2022-10-12 22:08:31) > Update HDMI volatile registers list as DMA, Channel Selection registers, > vbit control registers are being reflected by hardware DP port > disconnection. > > This update is required to fix no display and no sound issue observed > after reconnecting TAMA/SANWA DP cables. > Once DP cable is unplugged, DMA control registers are being reset by > hardware, however at second plugin, new dma control values does not > updated to the dma hardware registers since new register value and > cached values at the time of first plugin are same. > > Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- I found that another patch in this area hasn't been applied[1]. Is it still relevant? We're still carrying it in the chromium tree. If it is relevant can you please resend it. [1] https://lore.kernel.org/all/1602596728-11783-1-git-send-email-srivasam@codeaurora.org/
On 10/15/2022 2:41 AM, Stephen Boyd wrote: > Quoting Srinivasa Rao Mandadapu (2022-10-12 22:08:31) >> Update HDMI volatile registers list as DMA, Channel Selection registers, >> vbit control registers are being reflected by hardware DP port >> disconnection. >> >> This update is required to fix no display and no sound issue observed >> after reconnecting TAMA/SANWA DP cables. >> Once DP cable is unplugged, DMA control registers are being reset by >> hardware, however at second plugin, new dma control values does not >> updated to the dma hardware registers since new register value and >> cached values at the time of first plugin are same. >> >> Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") >> >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- > I found that another patch in this area hasn't been applied[1]. Is it > still relevant? We're still carrying it in the chromium tree. If it is > relevant can you please resend it. > > [1] https://lore.kernel.org/all/1602596728-11783-1-git-send-email-srivasam@codeaurora.org/ Thanks for Notifying this untracked patch. Resent the patch. - https://patchwork.kernel.org/project/alsa-devel/patch/1665825530-7593-1-git-send-email-quic_srivasam@quicinc.com/
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 8a56f38..99a3b44 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -782,10 +782,18 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg) return true; if (reg == LPASS_HDMI_TX_LEGACY_ADDR(v)) return true; + if (reg == LPASS_HDMI_TX_VBIT_CTL_ADDR(v)) + return true; for (i = 0; i < v->hdmi_rdma_channels; ++i) { if (reg == LPAIF_HDMI_RDMACURR_REG(v, i)) return true; + if (reg == LPASS_HDMI_TX_DMA_ADDR(v, i)) + return true; + if (reg == LPASS_HDMI_TX_CH_LSB_ADDR(v, i)) + return true; + if (reg == LPASS_HDMI_TX_CH_MSB_ADDR(v, i)) + return true; } return false; }
Update HDMI volatile registers list as DMA, Channel Selection registers, vbit control registers are being reflected by hardware DP port disconnection. This update is required to fix no display and no sound issue observed after reconnecting TAMA/SANWA DP cables. Once DP cable is unplugged, DMA control registers are being reset by hardware, however at second plugin, new dma control values does not updated to the dma hardware registers since new register value and cached values at the time of first plugin are same. Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- sound/soc/qcom/lpass-cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+)