| Message ID | 20150522111040.e517d4743fb51514762f1e61@ao2.it (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
Thank you for your answer, 2015-05-22 11:10 GMT+02:00 Antonio Ospite <ao2@ao2.it>: > On Thu, 21 May 2015 12:28:00 +0200 > jean-noël chardron <rondrach@gmail.com> wrote: > > > hello, > > > > Last week I got a Komplet Audio 6 from Native intruments. > > The driver exist in ALSA driver for this king of interface audio > > (snd-usb-audio) (thanks for the team who write this) but for the model > > where Id Vendor is 0x17cc and Id product is 0x1000. > > > > The KA6 that I got has not the same ID product (0x1001) therefore I don't > > have any device capture even with the driver snd-usb-audio. > > > > The challenge is to write the modification for this new model. > > Who could do that ? > > You can try yourself. > hum, it's indeed beyond my knowledge > > If you know or suspect that your device is similar to the supported ones > look where the 0x17cc vendor id is used and try to follow the existing > code, and try to come up with the _minimum_ amount of changes required to > make the device work. > > For instance, after a "git grep 0x17cc -- sound/" I came up with this > diff: > > diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h > index 2f6d3e9..d254b14 100644 > --- a/sound/usb/quirks-table.h > +++ b/sound/usb/quirks-table.h > @@ -2740,6 +2740,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), > .idProduct = 0x1000, > }, > { > + /* Komplete Audio 6 */ > + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, > + .idVendor = 0x17cc, > + .idProduct = 0x1001, > +}, > +{ > /* Traktor Audio 6 */ > .match_flags = USB_DEVICE_ID_MATCH_DEVICE, > .idVendor = 0x17cc, > diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c > index 7c5a701..2f9ee824 100644 > --- a/sound/usb/quirks.c > +++ b/sound/usb/quirks.c > @@ -1007,6 +1007,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, > return snd_usb_accessmusic_boot_quirk(dev); > > case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ > + case USB_ID(0x17cc, 0x1001): /* Komplete Audio 6 */ > case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ > case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ > return snd_usb_nativeinstruments_boot_quirk(dev); > > However without knowing the device I am not sure if the second change is > strictly necessary, or if the two are even enough. > > So please try to apply one of them at the time, recompile, test, and let > us know. > > I have tried that you write in first with no luck. I edit the files : edit :quirks.c and | or quirks-table.h -> result edit : yes and yes -> err = -11 in snd-usb-audio edit : no yes -> driver not loading edit : yes no -> err =-22 edit : no no -> driver load but no device capture > > If necessary I could send log, compile kernel source and so on. > > thanks, > > Keep logs before and after changes you make so that you can compare the > result of the changes. > > Ciao, > Antonio > > -- > Antonio Ospite > http://ao2.it > > A: Because it messes up the order in which people normally read text. > See http://en.wikipedia.org/wiki/Posting_style > Q: Why is top-posting such a bad thing? >
2015-05-22 12:04 GMT+02:00 jean-noël chardron <rondrach@gmail.com>: > Thank you for your answer, > > > 2015-05-22 11:10 GMT+02:00 Antonio Ospite <ao2@ao2.it>: > >> On Thu, 21 May 2015 12:28:00 +0200 >> jean-noël chardron <rondrach@gmail.com> wrote: >> >> > hello, >> > >> > Last week I got a Komplet Audio 6 from Native intruments. >> > The driver exist in ALSA driver for this king of interface audio >> > (snd-usb-audio) (thanks for the team who write this) but for the model >> > where Id Vendor is 0x17cc and Id product is 0x1000. >> > >> > The KA6 that I got has not the same ID product (0x1001) therefore I >> don't >> > have any device capture even with the driver snd-usb-audio. >> > >> > The challenge is to write the modification for this new model. >> > Who could do that ? >> >> You can try yourself. >> > hum, it's indeed beyond my knowledge > > >> >> If you know or suspect that your device is similar to the supported ones >> look where the 0x17cc vendor id is used and try to follow the existing >> code, and try to come up with the _minimum_ amount of changes required to >> make the device work. >> >> For instance, after a "git grep 0x17cc -- sound/" I came up with this >> diff: >> >> diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h >> index 2f6d3e9..d254b14 100644 >> --- a/sound/usb/quirks-table.h >> +++ b/sound/usb/quirks-table.h >> @@ -2740,6 +2740,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), >> .idProduct = 0x1000, >> }, >> { >> + /* Komplete Audio 6 */ >> + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, >> + .idVendor = 0x17cc, >> + .idProduct = 0x1001, >> +}, >> +{ >> /* Traktor Audio 6 */ >> .match_flags = USB_DEVICE_ID_MATCH_DEVICE, >> .idVendor = 0x17cc, >> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c >> index 7c5a701..2f9ee824 100644 >> --- a/sound/usb/quirks.c >> +++ b/sound/usb/quirks.c >> @@ -1007,6 +1007,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, >> return snd_usb_accessmusic_boot_quirk(dev); >> >> case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ >> + case USB_ID(0x17cc, 0x1001): /* Komplete Audio 6 */ >> case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ >> case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ >> return snd_usb_nativeinstruments_boot_quirk(dev); >> > > > > >> However without knowing the device I am not sure if the second change is >> strictly necessary, or if the two are even enough. >> >> So please try to apply one of them at the time, recompile, test, and let >> us know. >> >> I have tried that you write in first with no luck. > I edit the files : > > edit :quirks.c and | or quirks-table.h -> result > edit : yes and yes -> err = -11 in snd-usb-audio > edit : no yes -> driver not loading > edit : yes no -> err =-22 > edit : no no -> driver load but no device capture > > > >> > If necessary I could send log, compile kernel source and so on. >> > thanks, >> >> Keep logs before and after changes you make so that you can compare the >> result of the changes. >> >> Ciao, >> Antonio >> >> -- >> Antonio Ospite >> http://ao2.it >> >> A: Because it messes up the order in which people normally read text. >> See http://en.wikipedia.org/wiki/Posting_style >> Q: Why is top-posting such a bad thing? >> > > I forget : too, I have tried to edit the file in sound/usb/caiaq/device.c to active the snd-usb-caiaq driver and add the KA6 device with no more luck. diff device.h.old device.h 20a21 > #define USB_PID_KA6 0x1001 diff device.c.old device.c~ 54a55 > "{Native Instruments,Komplete Audio 6 v2}," 148a150,154 > }, > { > .match_flags = USB_DEVICE_ID_MATCH_DEVICE, > .idVendor = USB_VID_NATIVEINSTRUMENTS, > .idProduct = USB_PID_KA6 many errors in logs with error -5 and complaint about "can't set alt interface"
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 2f6d3e9..d254b14 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2740,6 +2740,12 @@ YAMAHA_DEVICE(0x7010, "UB99"), .idProduct = 0x1000, }, { + /* Komplete Audio 6 */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x17cc, + .idProduct = 0x1001, +}, +{ /* Traktor Audio 6 */ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x17cc, diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 7c5a701..2f9ee824 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1007,6 +1007,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, return snd_usb_accessmusic_boot_quirk(dev); case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ + case USB_ID(0x17cc, 0x1001): /* Komplete Audio 6 */ case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ return snd_usb_nativeinstruments_boot_quirk(dev);