Message ID | 20171130174200.6684-11-srinivas.kandagatla@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Nov 30, 2017 at 05:41:57PM +0000, srinivas.kandagatla@linaro.org wrote: > From: Sagar Dharia <sdharia@codeaurora.org> > > This patch add device tree bindings for Qualcomm slimbus controller. > > Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt > > diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt > new file mode 100644 > index 000000000000..93a6fdaf09b3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt > @@ -0,0 +1,39 @@ > +Qualcomm SLIMbus controller > +This controller is used if applications processor driver controls SLIMbus > +master component. > + > +Required properties: > + > + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt > + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt > + > + - reg : Offset and length of the register region(s) for the device > + - reg-names : Register region name(s) referenced in reg above > + Required register resource entries are: > + "ctrl": Physical address of controller register blocks > + "slew": required for "qcom,apq8064-slim" SOC. > + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible > + followed by "qcom,slim" for fallback. > + - interrupts : Interrupt number used by this controller > + - clocks : Interface and core clocks used by this SLIMbus controller > + - clock-names : Required clock-name entries are: > + "iface_clk" : Interface clock for this controller > + "core_clk" : Interrupt for controller core's BAM Doesn't match the example. You should drop the '_clk'. With that, Reviewed-by: Rob Herring <robh@kernel.org> > + > +Example: > + > + slim@28080000 { > + compatible = "qcom,apq8064-slim", "qcom,slim"; > + reg = <0x28080000 0x2000>, <0x80207C 4>; > + reg-names = "ctrl", "slew"; > + interrupts = <0 33 0>; > + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; > + clock-names = "iface", "core"; > + #address-cells = <2>; > + #size-cell = <0>; > + > + wcd9310: audio-codec@1,0{ > + compatible = "slim217,60"; > + reg = <1 0>; > + }; > + }; > -- > 2.15.0 >
On 04/12/17 21:28, Rob Herring wrote: > On Thu, Nov 30, 2017 at 05:41:57PM +0000, srinivas.kandagatla@linaro.org wrote: >> From: Sagar Dharia <sdharia@codeaurora.org> >> >> This patch add device tree bindings for Qualcomm slimbus controller. >> >> Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 39 ++++++++++++++++++++++ >> 1 file changed, 39 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt >> >> + - clocks : Interface and core clocks used by this SLIMbus controller >> + - clock-names : Required clock-name entries are: >> + "iface_clk" : Interface clock for this controller >> + "core_clk" : Interrupt for controller core's BAM > > Doesn't match the example. You should drop the '_clk'. With that, > Thanks for the Reviewed-by tag, I will fix the above in next version. > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt new file mode 100644 index 000000000000..93a6fdaf09b3 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -0,0 +1,39 @@ +Qualcomm SLIMbus controller +This controller is used if applications processor driver controls SLIMbus +master component. + +Required properties: + + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + + - reg : Offset and length of the register region(s) for the device + - reg-names : Register region name(s) referenced in reg above + Required register resource entries are: + "ctrl": Physical address of controller register blocks + "slew": required for "qcom,apq8064-slim" SOC. + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible + followed by "qcom,slim" for fallback. + - interrupts : Interrupt number used by this controller + - clocks : Interface and core clocks used by this SLIMbus controller + - clock-names : Required clock-name entries are: + "iface_clk" : Interface clock for this controller + "core_clk" : Interrupt for controller core's BAM + +Example: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207C 4>; + reg-names = "ctrl", "slew"; + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + wcd9310: audio-codec@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + };