@@ -1586,7 +1586,6 @@ static int rt5651_set_bias_level(struct snd_soc_component *component,
static int rt5651_probe(struct snd_soc_component *component)
{
struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component);
- struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
rt5651->component = component;
@@ -1602,15 +1601,6 @@ static int rt5651_probe(struct snd_soc_component *component)
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
- if (rt5651->jd_src) {
- snd_soc_dapm_force_enable_pin(dapm, "JD Power");
- snd_soc_dapm_force_enable_pin(dapm, "LDO");
- snd_soc_dapm_sync(dapm);
-
- regmap_update_bits(rt5651->regmap, RT5651_MICBIAS,
- 0x38, 0x38);
- }
-
return 0;
}
@@ -1841,10 +1831,64 @@ static void rt5651_jack_detect_work(struct work_struct *work)
int rt5651_set_jack_detect(struct snd_soc_component *component,
struct snd_soc_jack *hp_jack)
{
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ if (!rt5651->irq)
+ return -EINVAL;
+
+ /* IRQ output on GPIO1 */
+ snd_soc_component_update_bits(component, RT5651_GPIO_CTRL1,
+ RT5651_GP1_PIN_MASK, RT5651_GP1_PIN_IRQ);
+
+ switch (rt5651->jd_src) {
+ case RT5651_JD1_1:
+ snd_soc_component_update_bits(component, RT5651_JD_CTRL2,
+ RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD1_1);
+ snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1,
+ RT5651_JD1_1_IRQ_EN, RT5651_JD1_1_IRQ_EN);
+ break;
+ case RT5651_JD1_2:
+ snd_soc_component_update_bits(component, RT5651_JD_CTRL2,
+ RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD1_2);
+ snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1,
+ RT5651_JD1_2_IRQ_EN, RT5651_JD1_2_IRQ_EN);
+ break;
+ case RT5651_JD2:
+ snd_soc_component_update_bits(component, RT5651_JD_CTRL2,
+ RT5651_JD_TRG_SEL_MASK, RT5651_JD_TRG_SEL_JD2);
+ snd_soc_component_update_bits(component, RT5651_IRQ_CTRL1,
+ RT5651_JD2_IRQ_EN, RT5651_JD2_IRQ_EN);
+ break;
+ case RT5651_JD_NULL:
+ return 0;
+ default:
+ dev_warn(component->dev, "Currently only JD1_1 / JD1_2 / JD2 are supported\n");
+ return 0;
+ }
+
+ snd_soc_dapm_force_enable_pin(dapm, "JD Power");
+ snd_soc_dapm_force_enable_pin(dapm, "LDO");
+ snd_soc_dapm_sync(dapm);
+
+ snd_soc_component_update_bits(component, RT5651_MICBIAS, 0x38, 0x38);
rt5651->hp_jack = hp_jack;
- rt5651_irq(0, rt5651);
+
+ ret = devm_request_threaded_irq(component->dev, rt5651->irq, NULL,
+ rt5651_irq,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT, "rt5651", rt5651);
+ if (ret) {
+ dev_err(component->dev, "Failed to reguest IRQ: %d\n", ret);
+ return ret;
+ }
+
+ /* sync initial jack state */
+ queue_delayed_work(system_power_efficient_wq,
+ &rt5651->jack_detect_work, 0);
return 0;
}
@@ -1896,61 +1940,11 @@ static int rt5651_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt5651->regmap, RT5651_GPIO_CTRL1,
RT5651_GP2_PIN_MASK, RT5651_GP2_PIN_DMIC1_SCL);
+ rt5651->irq = i2c->irq;
rt5651->hp_mute = 1;
- if (rt5651->jd_src) {
-
- /* IRQ output on GPIO1 */
- regmap_update_bits(rt5651->regmap, RT5651_GPIO_CTRL1,
- RT5651_GP1_PIN_MASK, RT5651_GP1_PIN_IRQ);
-
- switch (rt5651->jd_src) {
- case RT5651_JD1_1:
- regmap_update_bits(rt5651->regmap, RT5651_JD_CTRL2,
- RT5651_JD_TRG_SEL_MASK,
- RT5651_JD_TRG_SEL_JD1_1);
- regmap_update_bits(rt5651->regmap, RT5651_IRQ_CTRL1,
- RT5651_JD1_1_IRQ_EN,
- RT5651_JD1_1_IRQ_EN);
- break;
- case RT5651_JD1_2:
- regmap_update_bits(rt5651->regmap, RT5651_JD_CTRL2,
- RT5651_JD_TRG_SEL_MASK,
- RT5651_JD_TRG_SEL_JD1_2);
- regmap_update_bits(rt5651->regmap, RT5651_IRQ_CTRL1,
- RT5651_JD1_2_IRQ_EN,
- RT5651_JD1_2_IRQ_EN);
- break;
- case RT5651_JD2:
- regmap_update_bits(rt5651->regmap, RT5651_JD_CTRL2,
- RT5651_JD_TRG_SEL_MASK,
- RT5651_JD_TRG_SEL_JD2);
- regmap_update_bits(rt5651->regmap, RT5651_IRQ_CTRL1,
- RT5651_JD2_IRQ_EN,
- RT5651_JD2_IRQ_EN);
- break;
- case RT5651_JD_NULL:
- break;
- default:
- dev_warn(&i2c->dev, "Currently only JD1_1 / JD1_2 / JD2 are supported\n");
- break;
- }
- }
-
INIT_DELAYED_WORK(&rt5651->jack_detect_work, rt5651_jack_detect_work);
- if (i2c->irq) {
- ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
- rt5651_irq,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING |
- IRQF_ONESHOT, "rt5651", rt5651);
- if (ret) {
- dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
- return ret;
- }
- }
-
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_rt5651,
rt5651_dai, ARRAY_SIZE(rt5651_dai));
@@ -2065,6 +2065,7 @@ struct rt5651_priv {
struct delayed_work jack_detect_work;
enum rt5651_jd_src jd_src;
+ int irq;
int sysclk;
int sysclk_src;
int lrck[RT5651_AIFS];
Move all jack-detect initialization to rt5651_set_jack_detect. The main reason to do this is so that platform code can setup jack-detect properties after the device has been probed, which unfortunately is necessary on some platforms. This has 2 additional advantages: 1) Grouping all jack-detect init together makes it easier to follow what is happening and results in a small reduction in the number of loc. 2) Before we would register the irq handler before rt5651->hp_jack was assigned, leading to a potential NULL deref if the jack_detect work runs before the machine driver has called set_jack. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- sound/soc/codecs/rt5651.c | 118 ++++++++++++++++++++++------------------------ sound/soc/codecs/rt5651.h | 1 + 2 files changed, 57 insertions(+), 62 deletions(-)