@@ -1,3 +1,4 @@
snd-dice-objs := dice-transaction.o dice-stream.o dice-proc.o dice-midi.o \
- dice-pcm.o dice-hwdep.o dice.o dice-tcelectronic.o
+ dice-pcm.o dice-hwdep.o dice.o dice-tcelectronic.o \
+ dice-alesis.o
obj-$(CONFIG_SND_DICE) += snd-dice.o
new file mode 100644
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dice-alesis.c - a part of driver for DICE based devices
+ *
+ * Copyright (c) 2018 Takashi Sakamoto
+ */
+
+#include "dice.h"
+
+static const unsigned int
+alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
+ {6, 6, 4}, /* Tx0 = Analog + S/PDIF. */
+ {8, 4, 0}, /* Tx1 = ADAT1. */
+};
+
+static const unsigned int
+alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
+ {10, 10, 8}, /* Tx0 = Analog + S/PDIF. */
+ {16, 8, 0}, /* Tx1 = ADAT1 + ADAT2. */
+};
+
+int snd_dice_detect_alesis_formats(struct snd_dice *dice)
+{
+ __be32 reg;
+ u32 data;
+ int i;
+ int err;
+
+ err = snd_dice_transaction_read_tx(dice, TX_NUMBER_AUDIO, ®,
+ sizeof(reg));
+ if (err < 0)
+ return err;
+ data = be32_to_cpu(reg);
+
+ if (data == 4 || data == 6) {
+ memcpy(dice->tx_pcm_chs, alesis_io14_tx_pcm_chs,
+ MAX_STREAMS * SND_DICE_RATE_MODE_COUNT *
+ sizeof(unsigned int));
+ } else {
+ memcpy(dice->rx_pcm_chs, alesis_io26_tx_pcm_chs,
+ MAX_STREAMS * SND_DICE_RATE_MODE_COUNT *
+ sizeof(unsigned int));
+ }
+
+ for (i = 0; i < SND_DICE_RATE_MODE_COUNT; ++i)
+ dice->rx_pcm_chs[0][i] = 8;
+
+ dice->tx_midi_ports[0] = 1;
+ dice->rx_midi_ports[0] = 1;
+
+ return 0;
+}
@@ -15,11 +15,14 @@ MODULE_LICENSE("GPL v2");
#define OUI_LOUD 0x000ff2
#define OUI_FOCUSRITE 0x00130e
#define OUI_TCELECTRONIC 0x000166
+#define OUI_ALESIS 0x000595
#define DICE_CATEGORY_ID 0x04
#define WEISS_CATEGORY_ID 0x00
#define LOUD_CATEGORY_ID 0x10
+#define MODEL_ALESIS_IO_BOTH 0x000001
+
/*
* Some models support several isochronous channels, while these streams are not
* always available. In this case, add the model name to this list.
@@ -382,6 +385,14 @@ static const struct ieee1394_device_id dice_id_table[] = {
.model_id = 0x000027,
.driver_data = (kernel_ulong_t)snd_dice_detect_tcelectronic_formats,
},
+ /* Alesis iO14/iO26. */
+ {
+ .match_flags = IEEE1394_MATCH_VENDOR_ID |
+ IEEE1394_MATCH_MODEL_ID,
+ .vendor_id = OUI_ALESIS,
+ .model_id = MODEL_ALESIS_IO_BOTH,
+ .driver_data = (kernel_ulong_t)snd_dice_detect_alesis_formats,
+ },
{
.match_flags = IEEE1394_MATCH_VERSION,
.version = DICE_INTERFACE,
@@ -226,5 +226,6 @@ void snd_dice_create_proc(struct snd_dice *dice);
int snd_dice_create_midi(struct snd_dice *dice);
int snd_dice_detect_tcelectronic_formats(struct snd_dice *dice);
+int snd_dice_detect_alesis_formats(struct snd_dice *dice);
#endif
Alesis shipped some models with DICE ASICs. All of them just support DICE original protocol and drivers can't retrieve all of available stream formats without changing status of sampling transmission frequency actually. This commit puts some hard-coded parameters for the models. When detecting the models, the corresponding parameters are copied as cache of stream formats. I note that each of pair of iO14/iO26 and MultiMix 8/12/16 has the same model ID on their configuration ROM. The MultiMix 8/12/16 just support one mode for sampling transmission frequency and ALSA dice driver already handles them correctly. The iO14/iO26 support three modes and need hard-coded parameters. To distinguish these two models, this commit let the driver to retrieve current stream formats and compare it to known parameters, then decide it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> --- sound/firewire/dice/Makefile | 3 ++- sound/firewire/dice/dice-alesis.c | 52 +++++++++++++++++++++++++++++++++++++++ sound/firewire/dice/dice.c | 11 +++++++++ sound/firewire/dice/dice.h | 1 + 4 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 sound/firewire/dice/dice-alesis.c