deleted file mode 100644
@@ -1,27 +0,0 @@
-/*
- * linux/sound/rt5640.h -- Platform data for RT5640
- *
- * Copyright 2011 Realtek Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_SND_RT5640_H
-#define __LINUX_SND_RT5640_H
-
-struct rt5640_platform_data {
- /* IN1 & IN2 & IN3 can optionally be differential */
- bool in1_diff;
- bool in2_diff;
- bool in3_diff;
-
- bool dmic_en;
- bool dmic1_data_pin; /* 0 = IN1P; 1 = GPIO3 */
- bool dmic2_data_pin; /* 0 = IN1N; 1 = GPIO4 */
-
- int ldo1_en; /* GPIO for LDO1_EN */
-};
-
-#endif
@@ -2138,10 +2138,6 @@ static int rt5640_probe(struct snd_soc_component *component)
return -ENODEV;
}
- if (rt5640->pdata.dmic_en)
- rt5640_dmic_enable(component, rt5640->pdata.dmic1_data_pin,
- rt5640->pdata.dmic2_data_pin);
-
return 0;
}
@@ -2159,8 +2155,8 @@ static int rt5640_suspend(struct snd_soc_component *component)
rt5640_reset(component);
regcache_cache_only(rt5640->regmap, true);
regcache_mark_dirty(rt5640->regmap);
- if (gpio_is_valid(rt5640->pdata.ldo1_en))
- gpio_set_value_cansleep(rt5640->pdata.ldo1_en, 0);
+ if (gpio_is_valid(rt5640->ldo1_en))
+ gpio_set_value_cansleep(rt5640->ldo1_en, 0);
return 0;
}
@@ -2169,8 +2165,8 @@ static int rt5640_resume(struct snd_soc_component *component)
{
struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
- if (gpio_is_valid(rt5640->pdata.ldo1_en)) {
- gpio_set_value_cansleep(rt5640->pdata.ldo1_en, 1);
+ if (gpio_is_valid(rt5640->ldo1_en)) {
+ gpio_set_value_cansleep(rt5640->ldo1_en, 1);
msleep(400);
}
@@ -2302,22 +2298,16 @@ MODULE_DEVICE_TABLE(acpi, rt5640_acpi_match);
static int rt5640_parse_dt(struct rt5640_priv *rt5640, struct device_node *np)
{
- rt5640->pdata.in1_diff = of_property_read_bool(np,
- "realtek,in1-differential");
- rt5640->pdata.in2_diff = of_property_read_bool(np,
- "realtek,in2-differential");
-
- rt5640->pdata.ldo1_en = of_get_named_gpio(np,
- "realtek,ldo1-en-gpios", 0);
+ rt5640->ldo1_en = of_get_named_gpio(np, "realtek,ldo1-en-gpios", 0);
/*
* LDO1_EN is optional (it may be statically tied on the board).
* -ENOENT means that the property doesn't exist, i.e. there is no
* GPIO, so is not an error. Any other error code means the property
* exists, but could not be parsed.
*/
- if (!gpio_is_valid(rt5640->pdata.ldo1_en) &&
- (rt5640->pdata.ldo1_en != -ENOENT))
- return rt5640->pdata.ldo1_en;
+ if (!gpio_is_valid(rt5640->ldo1_en) &&
+ (rt5640->ldo1_en != -ENOENT))
+ return rt5640->ldo1_en;
return 0;
}
@@ -2325,7 +2315,6 @@ static int rt5640_parse_dt(struct rt5640_priv *rt5640, struct device_node *np)
static int rt5640_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct rt5640_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt5640_priv *rt5640;
int ret;
unsigned int val;
@@ -2337,22 +2326,12 @@ static int rt5640_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
i2c_set_clientdata(i2c, rt5640);
- if (pdata) {
- rt5640->pdata = *pdata;
- /*
- * Translate zero'd out (default) pdata value to an invalid
- * GPIO ID. This makes the pdata and DT paths consistent in
- * terms of the value left in this field when no GPIO is
- * specified, but means we can't actually use GPIO 0.
- */
- if (!rt5640->pdata.ldo1_en)
- rt5640->pdata.ldo1_en = -EINVAL;
- } else if (i2c->dev.of_node) {
+ if (i2c->dev.of_node) {
ret = rt5640_parse_dt(rt5640, i2c->dev.of_node);
if (ret)
return ret;
} else
- rt5640->pdata.ldo1_en = -EINVAL;
+ rt5640->ldo1_en = -EINVAL;
rt5640->regmap = devm_regmap_init_i2c(i2c, &rt5640_regmap);
if (IS_ERR(rt5640->regmap)) {
@@ -2362,13 +2341,13 @@ static int rt5640_i2c_probe(struct i2c_client *i2c,
return ret;
}
- if (gpio_is_valid(rt5640->pdata.ldo1_en)) {
- ret = devm_gpio_request_one(&i2c->dev, rt5640->pdata.ldo1_en,
+ if (gpio_is_valid(rt5640->ldo1_en)) {
+ ret = devm_gpio_request_one(&i2c->dev, rt5640->ldo1_en,
GPIOF_OUT_INIT_HIGH,
"RT5640 LDO1_EN");
if (ret < 0) {
dev_err(&i2c->dev, "Failed to request LDO1_EN %d: %d\n",
- rt5640->pdata.ldo1_en, ret);
+ rt5640->ldo1_en, ret);
return ret;
}
msleep(400);
@@ -2391,15 +2370,15 @@ static int rt5640_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt5640->regmap, RT5640_DUMMY1,
RT5640_MCLK_DET, RT5640_MCLK_DET);
- if (rt5640->pdata.in1_diff)
+ if (device_property_read_bool(&i2c->dev, "realtek,in1-differential"))
regmap_update_bits(rt5640->regmap, RT5640_IN1_IN2,
RT5640_IN_DF1, RT5640_IN_DF1);
- if (rt5640->pdata.in2_diff)
+ if (device_property_read_bool(&i2c->dev, "realtek,in2-differential"))
regmap_update_bits(rt5640->regmap, RT5640_IN3_IN4,
RT5640_IN_DF2, RT5640_IN_DF2);
- if (rt5640->pdata.in3_diff)
+ if (device_property_read_bool(&i2c->dev, "realtek,in3-differential"))
regmap_update_bits(rt5640->regmap, RT5640_IN1_IN2,
RT5640_IN_DF2, RT5640_IN_DF2);
@@ -13,7 +13,6 @@
#define _RT5640_H
#include <linux/clk.h>
-#include <sound/rt5640.h>
/* Info */
#define RT5640_RESET 0x00
@@ -2103,10 +2102,10 @@ enum {
struct rt5640_priv {
struct snd_soc_component *component;
- struct rt5640_platform_data pdata;
struct regmap *regmap;
struct clk *mclk;
+ int ldo1_en; /* GPIO for LDO1_EN */
int sysclk;
int sysclk_src;
int lrck[RT5640_AIFS];
There are no in tree users of platform-data for the rt5640 codec driver, so lets remove support for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- include/sound/rt5640.h | 27 -------------------- sound/soc/codecs/rt5640.c | 53 ++++++++++++--------------------------- sound/soc/codecs/rt5640.h | 3 +-- 3 files changed, 17 insertions(+), 66 deletions(-) delete mode 100644 include/sound/rt5640.h