diff mbox

[v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need

Message ID 20180617170217.24177-7-robert.jarzmik@free.fr (mailing list archive)
State Accepted
Commit ac75a50b6de3b092d084fdd9818707d0d5073ad6
Headers show

Commit Message

Robert Jarzmik June 17, 2018, 5:02 p.m. UTC
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

Comments

Daniel Mack June 17, 2018, 6:12 p.m. UTC | #1
On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>

Something went wrong here, but you can simply fix that when applying the 
series :)


Daniel

> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>   drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
>   1 file changed, 1 insertion(+), 16 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index 10e953218948..64618254d6de 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
>   						    dev);
>   	struct dma_slave_config config = {};
>   	struct resource *r;
> -	dma_cap_mask_t mask;
> -	struct pxad_param param;
>   	int ret;
>   
>   	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
> @@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
>   	if (ret)
>   		return ret;
>   
> -	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> -	if (!r) {
> -		dev_err(nfc->dev, "No resource defined for data DMA\n");
> -		return -ENXIO;
> -	}
> -
> -	param.drcmr = r->start;
> -	param.prio = PXAD_PRIO_LOWEST;
> -	dma_cap_zero(mask);
> -	dma_cap_set(DMA_SLAVE, mask);
> -	nfc->dma_chan =
> -		dma_request_slave_channel_compat(mask, pxad_filter_fn,
> -						 &param, nfc->dev,
> -						 "data");
> +	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
>   	if (!nfc->dma_chan) {
>   		dev_err(nfc->dev,
>   			"Unable to request data DMA channel\n");
>
Robert Jarzmik June 18, 2018, 7:31 p.m. UTC | #2
Daniel Mack <daniel@zonque.org> writes:

> On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
>> As the pxa architecture switched towards the dmaengine slave map, the
>> old compatibility mechanism to acquire the dma requestor line number and
>> priority are not needed anymore.
>>
>> This patch simplifies the dma resource acquisition, using the more
>> generic function dma_request_slave_channel().
>>
>> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
>
> Something went wrong here, but you can simply fix that when applying the series
> :)
Indeed, fixed before applying to the pxa/for-next tree.

--
Robert
diff mbox

Patch

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 10e953218948..64618254d6de 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2613,8 +2613,6 @@  static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 						    dev);
 	struct dma_slave_config config = {};
 	struct resource *r;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
@@ -2627,20 +2625,7 @@  static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	if (ret)
 		return ret;
 
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!r) {
-		dev_err(nfc->dev, "No resource defined for data DMA\n");
-		return -ENXIO;
-	}
-
-	param.drcmr = r->start;
-	param.prio = PXAD_PRIO_LOWEST;
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	nfc->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, nfc->dev,
-						 "data");
+	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
 	if (!nfc->dma_chan) {
 		dev_err(nfc->dev,
 			"Unable to request data DMA channel\n");