diff mbox series

[01/12] mfd: dt-bindings: Add wcd9335 mfd bindings

Message ID 20180723155410.9494-2-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series mfd: Add support to WCD9335 Audio Codec | expand

Commit Message

Srinivas Kandagatla July 23, 2018, 3:53 p.m. UTC
Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build
Soundwire controller, interrupt mux. It supports both I2S/I2C and
SLIMbus audio interfaces.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../devicetree/bindings/mfd/qcom,wcd9335.txt       | 130 +++++++++++++++++++++
 1 file changed, 130 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt

Comments

Vinod Koul July 24, 2018, 5:56 a.m. UTC | #1
On 23-07-18, 16:53, Srinivas Kandagatla wrote:
> Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
> Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
> the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build

in-built perhaps?
Srinivas Kandagatla July 24, 2018, 11:50 a.m. UTC | #2
On 24/07/18 06:56, Vinod wrote:
> On 23-07-18, 16:53, Srinivas Kandagatla wrote:
>> Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
>> Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
>> the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build
> 
> in-built perhaps?
> 
Yep, will do that in next version as part of codec bindings!!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt b/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt
new file mode 100644
index 000000000000..1f8c9e8d4e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt
@@ -0,0 +1,130 @@ 
+QCOM WCD9335 Codec
+
+Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
+Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
+the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build
+Soundwire controller, interrupt mux. It supports both I2S/I2C and
+SLIMbus audio interfaces.
+
+Required properties with SLIMbus Interface:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: For SLIMbus interface it should be "slimMID,PID",
+		    textual representation of Manufacturer ID, Product Code,
+		    shall be in lower case hexadecimal with leading zeroes
+		    suppressed.  Refer to slimbus/bus.txt for details.
+		    Should be:
+		    "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
+
+- reg
+	Usage: required
+	Value type: <u32 u32>
+	Definition: Should be ('Device index', 'Instance ID')
+
+- interrupts
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Interrupts via WCD INTR1 and INTR2 pins
+
+- interrupt-names:
+	Usage: required
+	Value type: <String array>
+	Definition: Interrupt names of WCD INTR1 and INTR2
+	Should be: "intr1", "intr2"
+
+- reset-gpio:
+	Usage: required
+	Value type: <String Array>
+	Definition: Reset gpio line
+
+- qcom,ifd:
+	Usage: required
+	Value type: <phandle>
+	Definition: SLIM interface device
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: See clock-bindings.txt section "consumers". List of
+                three clock specifiers for mclk, mclk2 and slimbus clock.
+
+- clock-names:
+	Usage: required
+	Value type: <string>
+	Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+
+- vdd-buck-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the 1.8V buck supply
+
+- vdd-buck-sido-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the 1.8V SIDO buck supply
+
+- vdd-rx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the 1.8V rx supply
+
+- vdd-tx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the 1.8V tx supply
+
+- vdd-vbat-supply:
+	Usage: Optional
+	Value type: <phandle>
+	Definition: Should contain a reference to the vbat supply
+
+- vdd-micbias-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the micbias supply
+
+- vdd-io-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: Should contain a reference to the 1.8V io supply
+
+- interrupt-controller:
+	Usage: required
+	Definition: Indicating that this is a interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <int>
+	Definition: should be 1
+
+= WCD9335 Child devices
+Each subnode of WCD9335 represents a functional blocks like
+"audio codec", "soundwire Controller" of WCD. The name of the
+nodes are not important. The properties of these nodes are
+defined by the individual bindings for the specific device.
+
+Example:
+
+wcd9335@1 {
+	compatible = "slim217,1a0";
+	reg  = <1 0>;
+	interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "intr2"
+	reset-gpio = <&msmgpio 64 0>;
+	qcom,ifd  = <&wc9335_ifd>;
+	clock-names = "mclk", "native";
+	clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+	vdd-buck-supply = <&pm8994_s4>;
+	vdd-rx-supply = <&pm8994_s4>;
+	vdd-buck-sido-supply = <&pm8994_s4>;
+	vdd-tx-supply = <&pm8994_s4>;
+	vdd-io-supply = <&pm8994_s4>;
+
+	codec {
+		compatible = "qcom,wcd9335-codec";
+		#sound-dai-cells = <1>;
+	};
+}