@@ -207,6 +207,8 @@ struct sun4i_i2s_clk_div {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
+ { .div = 32, .val = 6 },
+ { .div = 64, .val = 7 },
/* TODO - extend divide ratio supported by newer SoCs */
};
@@ -219,6 +221,9 @@ struct sun4i_i2s_clk_div {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
+ { .div = 32, .val = 8 },
+ { .div = 48, .val = 9 },
+ { .div = 64, .val = 10 },
/* TODO - extend divide ratio supported by newer SoCs */
};
@@ -393,6 +398,9 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
case 16:
width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
+ case 32:
+ width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
default:
dev_err(dai->dev, "Unsupported physical sample width: %d\n",
params_physical_width(params));
@@ -405,6 +413,10 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
sr = 0;
wss = 0;
break;
+ case 24:
+ sr = 2;
+ wss = 3;
+ break;
default:
dev_err(dai->dev, "Unsupported sample width: %d\n",
@@ -418,7 +430,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
sr + i2s->variant->fmt_offset);
return sun4i_i2s_set_clk_rate(dai, params_rate(params),
- params_width(params));
+ params_physical_width(params));
}
static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
@@ -720,14 +732,14 @@ static int sun4i_i2s_dai_probe(struct snd_soc_dai *dai)
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
},
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
},
.ops = &sun4i_i2s_dai_ops,
.symmetric_rates = 1,
Add additional clock divider ratios for BCLK and MCLK, per the A20 datasheet. Add support for 32-bit physical sample width. Add support for 24-bit actual sample width. Change third parameter of call to sun4i_i2s_set_clk_rate() from sun4i_i2s_hw_params() to use physical sample width, which is appropriate here. Signed-off-by: Jonathan Fether <jonf@mds.com> --- sound/soc/sunxi/sun4i-i2s.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)