@@ -47,6 +47,12 @@ struct byt_cht_es8316_private {
bool speaker_en;
};
+enum {
+ BYT_CHT_ES8316_INTMIC_IN1_MAP,
+ BYT_CHT_ES8316_INTMIC_IN2_MAP,
+};
+
+#define BYT_CHT_ES8316_MAP(quirk) ((quirk) & GENMASK(3, 0))
#define BYT_CHT_ES8316_SSP0 BIT(16)
static int quirk;
@@ -57,6 +63,10 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static void log_quirks(struct device *dev)
{
+ if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN1_MAP)
+ dev_info(dev, "quirk IN1_MAP enabled");
+ if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN2_MAP)
+ dev_info(dev, "quirk IN2_MAP enabled");
if (quirk & BYT_CHT_ES8316_SSP0)
dev_info(dev, "quirk SSP0 enabled");
}
@@ -81,14 +91,7 @@ static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
SND_SOC_DAPM_SPK("Speaker", NULL),
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
-
- /*
- * The codec supports two analog microphone inputs. I have only
- * tested MIC1. A DMIC route could also potentially be added
- * if such functionality is found on another platform.
- */
- SND_SOC_DAPM_MIC("Microphone 1", NULL),
- SND_SOC_DAPM_MIC("Microphone 2", NULL),
+ SND_SOC_DAPM_MIC("Internal Mic", NULL),
SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0,
byt_cht_es8316_speaker_power_event,
@@ -96,10 +99,6 @@ static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
};
static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
- {"MIC1", NULL, "Microphone 1"},
- {"MIC2", NULL, "Microphone 2"},
- {"MIC1", NULL, "Headset Mic"},
-
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
@@ -112,6 +111,16 @@ static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
{"Speaker", NULL, "Speaker Power"},
};
+static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in1_map[] = {
+ {"MIC1", NULL, "Internal Mic"},
+ {"MIC2", NULL, "Headset Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in2_map[] = {
+ {"MIC2", NULL, "Internal Mic"},
+ {"MIC1", NULL, "Headset Mic"},
+};
+
static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
{"Playback", NULL, "ssp0 Tx"},
{"ssp0 Tx", NULL, "modem_out"},
@@ -132,8 +141,7 @@ static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
- SOC_DAPM_PIN_SWITCH("Microphone 1"),
- SOC_DAPM_PIN_SWITCH("Microphone 2"),
+ SOC_DAPM_PIN_SWITCH("Internal Mic"),
};
static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = {
@@ -158,6 +166,21 @@ static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
card->dapm.idle_bias_off = true;
+ switch (BYT_CHT_ES8316_MAP(quirk)) {
+ case BYT_CHT_ES8316_INTMIC_IN1_MAP:
+ default:
+ custom_map = byt_cht_es8316_intmic_in1_map;
+ num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in1_map);
+ break;
+ case BYT_CHT_ES8316_INTMIC_IN2_MAP:
+ custom_map = byt_cht_es8316_intmic_in2_map;
+ num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in2_map);
+ break;
+ }
+ ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+ if (ret)
+ return ret;
+
if (quirk & BYT_CHT_ES8316_SSP0) {
custom_map = byt_cht_es8316_ssp0_map;
num_routes = ARRAY_SIZE(byt_cht_es8316_ssp0_map);
@@ -444,10 +467,11 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
/* Check for BYTCR or other platform and setup quirks */
if (x86_match_cpu(baytrail_cpu_ids) &&
mach->mach_params.acpi_ipc_irq_index == 0) {
- /* On BYTCR default to SSP0 */
- quirk = BYT_CHT_ES8316_SSP0;
+ /* On BYTCR default to SSP0, internal-mic-in2-map */
+ quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP;
} else {
- quirk = 0;
+ /* Others default to internal-mic-in1-map */
+ quirk = BYT_CHT_ES8316_INTMIC_IN1_MAP;
}
if (quirk_override != -1) {
dev_info(dev, "Overriding quirk 0x%x => 0x%x\n", quirk,
After adding jack-detect support we have 3 microphone input switches: "Microphone 1", "Microphone 2" and "Headset Mic". But the ES8316 has only 2 microphone inputs. In the app-note explaining how to use the codec and on the 3 boards I have one input is used for an internal microphone and one for the headset microphone. On the 2 CHT boards I have the internal mic is on on MIC1 and the headset mic is on MIC2, on the BYTCR board I have it is the other way around. This commit replaces the 2 "Microphone 1" and "Microphone 2" input switches with a single "Internal Mic" switch and adds support for selecting either possible input mapping. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- sound/soc/intel/boards/bytcht_es8316.c | 58 ++++++++++++++++++-------- 1 file changed, 41 insertions(+), 17 deletions(-)