@@ -18,12 +18,39 @@ static int pcm3060_set_sysclk(struct snd_soc_dai *dai, int clk_id,
{
struct snd_soc_component *comp = dai->component;
struct pcm3060_priv *priv = snd_soc_component_get_drvdata(comp);
+ unsigned int reg;
+ unsigned int val;
if (dir != SND_SOC_CLOCK_IN) {
dev_err(comp->dev, "unsupported sysclock dir: %d\n", dir);
return -EINVAL;
}
+ switch (clk_id) {
+ case PCM3060_CLK_DEF:
+ val = 0;
+ break;
+
+ case PCM3060_CLK1:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? PCM3060_REG_CSEL : 0);
+ break;
+
+ case PCM3060_CLK2:
+ val = (dai->id == PCM3060_DAI_ID_DAC ? 0 : PCM3060_REG_CSEL);
+ break;
+
+ default:
+ dev_err(comp->dev, "unsupported sysclock id: %d\n", clk_id);
+ return -EINVAL;
+ }
+
+ if (dai->id == PCM3060_DAI_ID_DAC)
+ reg = PCM3060_REG67;
+ else
+ reg = PCM3060_REG72;
+
+ regmap_update_bits(priv->regmap, reg, PCM3060_REG_CSEL, val);
+
priv->dai[dai->id].sclk_freq = freq;
return 0;
@@ -17,6 +17,11 @@ extern const struct regmap_config pcm3060_regmap;
#define PCM3060_DAI_ID_ADC 1
#define PCM3060_DAI_IDS_NUM 2
+/* ADC and DAC can be clocked from separate or same sources CLK1 and CLK2 */
+#define PCM3060_CLK_DEF 0 /* default: CLK1->ADC, CLK2->DAC */
+#define PCM3060_CLK1 1
+#define PCM3060_CLK2 2
+
struct pcm3060_priv_dai {
bool is_master;
unsigned int sclk_freq;
ADC and DAC can be clocked from separate or same sources CLK1 and CLK2. By default, ADC is clocked from CLK1, and DAC - from CLK2. This commits allows sound cards to selest a proper clock source during `hw_params()` via `snd_soc_dai_set_sysclk()`. It makes possible to have a single clock source for both ADC and DAC. Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech> --- sound/soc/codecs/pcm3060.c | 27 +++++++++++++++++++++++++++ sound/soc/codecs/pcm3060.h | 5 +++++ 2 files changed, 32 insertions(+)