diff mbox series

[RFC] ASoC: fsl_sai: Enable data lines based on input channels

Message ID 20190811195545.32606-1-daniel.baluta@nxp.com (mailing list archive)
State New, archived
Headers show
Series [RFC] ASoC: fsl_sai: Enable data lines based on input channels | expand

Commit Message

Daniel Baluta Aug. 11, 2019, 7:55 p.m. UTC
An audio data frame consists of a number of slots one for each
channel. In the case of I2S there are 2 data slots / frame.

The maximum number of SAI slots / frame is configurable at
IP integration time. This affects the width of Mask Register.
SAI supports up to 32 slots per frame.

The number of datalines is also configurable (up to 8 datalines)
and affects TCE/RCE and the number of data/FIFO registers.

The number of needed data lines (pins) is computed as follows:

* pins = channels / slots.

This can be computed in hw_params function so lets move TRCE bits
seting from startup to hw_params.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 34 +++++++++++++---------------------
 sound/soc/fsl/fsl_sai.h |  2 +-
 2 files changed, 14 insertions(+), 22 deletions(-)

Comments

Nicolin Chen Aug. 14, 2019, 1:39 a.m. UTC | #1
On Sun, Aug 11, 2019 at 10:55:45PM +0300, Daniel Baluta wrote:
> An audio data frame consists of a number of slots one for each
> channel. In the case of I2S there are 2 data slots / frame.
> 
> The maximum number of SAI slots / frame is configurable at
> IP integration time. This affects the width of Mask Register.
> SAI supports up to 32 slots per frame.
> 
> The number of datalines is also configurable (up to 8 datalines)
> and affects TCE/RCE and the number of data/FIFO registers.
> 
> The number of needed data lines (pins) is computed as follows:
> 
> * pins = channels / slots.
> 
> This can be computed in hw_params function so lets move TRCE bits
> seting from startup to hw_params.
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
>  sound/soc/fsl/fsl_sai.c | 34 +++++++++++++---------------------
>  sound/soc/fsl/fsl_sai.h |  2 +-
>  2 files changed, 14 insertions(+), 22 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index 69cf3678c859..b70032c82fe2 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c

> @@ -480,13 +483,17 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,

> -	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
> +	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << slots) - 1));

Would this break mono channel audio?

>  static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)

> @@ -881,6 +872,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	sai->pdev = pdev;
> +

Seemly unnecessary
Daniel Baluta Aug. 14, 2019, 2:02 p.m. UTC | #2
On Wed, Aug 14, 2019 at 4:39 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> On Sun, Aug 11, 2019 at 10:55:45PM +0300, Daniel Baluta wrote:
> > An audio data frame consists of a number of slots one for each
> > channel. In the case of I2S there are 2 data slots / frame.
> >
> > The maximum number of SAI slots / frame is configurable at
> > IP integration time. This affects the width of Mask Register.
> > SAI supports up to 32 slots per frame.
> >
> > The number of datalines is also configurable (up to 8 datalines)
> > and affects TCE/RCE and the number of data/FIFO registers.
> >
> > The number of needed data lines (pins) is computed as follows:
> >
> > * pins = channels / slots.
> >
> > This can be computed in hw_params function so lets move TRCE bits
> > seting from startup to hw_params.
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> > ---
> >  sound/soc/fsl/fsl_sai.c | 34 +++++++++++++---------------------
> >  sound/soc/fsl/fsl_sai.h |  2 +-
> >  2 files changed, 14 insertions(+), 22 deletions(-)
> >
> > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> > index 69cf3678c859..b70032c82fe2 100644
> > --- a/sound/soc/fsl/fsl_sai.c
> > +++ b/sound/soc/fsl/fsl_sai.c
>
> > @@ -480,13 +483,17 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
>
> > -     regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
> > +     regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << slots) - 1));
>
> Would this break mono channel audio?

Indeed, this isn't good for mono. I see in our internal tree that we
have min(channels, slots).
This would fix mono, let me think if this is really the right solution.

>
> >  static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
>
> > @@ -881,6 +872,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
> >               return -ENOMEM;
> >
> >       sai->pdev = pdev;
> > +
>
> Seemly unnecessary

Oh, ok. Will fix in next version.
diff mbox series

Patch

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 69cf3678c859..b70032c82fe2 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -414,6 +414,7 @@  static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	u32 val_cr4 = 0, val_cr5 = 0;
 	u32 slots = (channels == 1) ? 2 : channels;
 	u32 slot_width = word_width;
+	u32 pins;
 	int ret;
 
 	if (sai->slots)
@@ -422,6 +423,8 @@  static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	if (sai->slot_width)
 		slot_width = sai->slot_width;
 
+	pins = DIV_ROUND_UP(channels, slots);
+
 	if (!sai->is_slave_mode[tx]) {
 		ret = fsl_sai_set_bclk(cpu_dai, tx,
 				slots * slot_width * params_rate(params));
@@ -480,13 +483,17 @@  static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
+			   FSL_SAI_CR3_TRCE_MASK,
+			   FSL_SAI_CR3_TRCE((1 << pins) - 1));
+
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
 			   val_cr4);
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
-	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
+	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << slots) - 1));
 
 	return 0;
 }
@@ -496,6 +503,10 @@  static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+	unsigned int ofs = sai->soc_data->reg_offset;
+
+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
+			   FSL_SAI_CR3_TRCE_MASK, 0);
 
 	if (!sai->is_slave_mode[tx] &&
 			sai->mclk_streams & BIT(substream->stream)) {
@@ -603,32 +614,13 @@  static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 static int fsl_sai_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *cpu_dai)
 {
-	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned int ofs = sai->soc_data->reg_offset;
-	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	int ret;
 
-	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-			   FSL_SAI_CR3_TRCE_MASK,
-			   FSL_SAI_CR3_TRCE);
-
 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
-
 	return ret;
 }
 
-static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
-		struct snd_soc_dai *cpu_dai)
-{
-	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned int ofs = sai->soc_data->reg_offset;
-	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-
-	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-			   FSL_SAI_CR3_TRCE_MASK, 0);
-}
-
 static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
 	.set_sysclk	= fsl_sai_set_dai_sysclk,
 	.set_fmt	= fsl_sai_set_dai_fmt,
@@ -637,7 +629,6 @@  static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
 	.hw_free	= fsl_sai_hw_free,
 	.trigger	= fsl_sai_trigger,
 	.startup	= fsl_sai_startup,
-	.shutdown	= fsl_sai_shutdown,
 };
 
 static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
@@ -881,6 +872,7 @@  static int fsl_sai_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	sai->pdev = pdev;
+
 	sai->soc_data = of_device_get_match_data(&pdev->dev);
 
 	sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index c2c43a7d9ba1..3c5383139dc2 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -109,7 +109,7 @@ 
 #define FSL_SAI_CR2_DIV_MASK	0xff
 
 /* SAI Transmit and Receive Configuration 3 Register */
-#define FSL_SAI_CR3_TRCE	BIT(16)
+#define FSL_SAI_CR3_TRCE(x)	((x) << 16)
 #define FSL_SAI_CR3_TRCE_MASK	GENMASK(23, 16)
 #define FSL_SAI_CR3_WDFL(x)	(x)
 #define FSL_SAI_CR3_WDFL_MASK	0x1f