diff mbox series

[2/3] ASoC: SOF: imx: Add i.MX8 HW support

Message ID 20190815154500.29090-3-pierre-louis.bossart@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series ASoC: SOF: initial support for i.MX8 | expand

Commit Message

Pierre-Louis Bossart Aug. 15, 2019, 3:44 p.m. UTC
From: Daniel Baluta <daniel.baluta@nxp.com>

Add support for the audio DSP hardware found on NXP i.MX8 platform.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/Kconfig      |   1 +
 sound/soc/sof/Makefile     |   1 +
 sound/soc/sof/imx/Kconfig  |  22 +++
 sound/soc/sof/imx/Makefile |   4 +
 sound/soc/sof/imx/imx8.c   | 394 +++++++++++++++++++++++++++++++++++++
 5 files changed, 422 insertions(+)
 create mode 100644 sound/soc/sof/imx/Kconfig
 create mode 100644 sound/soc/sof/imx/Makefile
 create mode 100644 sound/soc/sof/imx/imx8.c

Comments

Cezary Rojewski Aug. 17, 2019, 3:21 p.m. UTC | #1
On 2019-08-15 17:44, Pierre-Louis Bossart wrote:
> From: Daniel Baluta <daniel.baluta@nxp.com>
> 
> Add support for the audio DSP hardware found on NXP i.MX8 platform.
> 
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> +static void imx8_get_reply(struct snd_sof_dev *sdev)
> +{
> +	struct snd_sof_ipc_msg *msg = sdev->msg;
> +	struct sof_ipc_reply reply;
> +	int ret = 0;
> +
> +	if (!msg) {
> +		dev_warn(sdev->dev, "unexpected ipc interrupt\n");
> +		return;
> +	}
> +
> +	/* get reply */
> +	sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
> +
> +	if (reply.error < 0) {
> +		memcpy(msg->reply_data, &reply, sizeof(reply));
> +		ret = reply.error;
> +	} else {
> +		/* reply has correct size? */
> +		if (reply.hdr.size != msg->reply_size) {
> +			dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
> +				msg->reply_size, reply.hdr.size);
> +			ret = -EINVAL;
> +		}
> +
> +		/* read the message */
> +		if (msg->reply_size > 0)
> +			sof_mailbox_read(sdev, sdev->host_box.offset,
> +					 msg->reply_data, msg->reply_size);
> +	}
> +
> +	msg->reply_error = ret;
> +}

Assuming reply.hdr.size is coming from HW IPC regs, msg object is 
representing application side - SW, kernel. If so, is msg->reply_size 
value an estimated size (which can be overestimated since exact size may 
be unknown by the host) -or- the exact size of incoming IPC reply?

The estimated-case is usually permissive as long as assumed size is >= 
reply.hdr.size - dev_err needed. In the exact-case, it should be viewed 
as a requirement. If such "requirement" fails, is it valid to read 
mailbox regardless? Is this to extract some error-debug payload sent by FW?

Just curious, please feel free to correct me here, Pierre.
Daniel Baluta Aug. 19, 2019, 6:44 a.m. UTC | #2
Hi Cezary,

On Sat, Aug 17, 2019 at 6:22 PM Cezary Rojewski
<cezary.rojewski@intel.com> wrote:
>
> On 2019-08-15 17:44, Pierre-Louis Bossart wrote:
> > From: Daniel Baluta <daniel.baluta@nxp.com>
> >
> > Add support for the audio DSP hardware found on NXP i.MX8 platform.
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> > Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> > +static void imx8_get_reply(struct snd_sof_dev *sdev)
> > +{
> > +     struct snd_sof_ipc_msg *msg = sdev->msg;
> > +     struct sof_ipc_reply reply;
> > +     int ret = 0;
> > +
> > +     if (!msg) {
> > +             dev_warn(sdev->dev, "unexpected ipc interrupt\n");
> > +             return;
> > +     }
> > +
> > +     /* get reply */
> > +     sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
> > +
> > +     if (reply.error < 0) {
> > +             memcpy(msg->reply_data, &reply, sizeof(reply));
> > +             ret = reply.error;
> > +     } else {
> > +             /* reply has correct size? */
> > +             if (reply.hdr.size != msg->reply_size) {
> > +                     dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
> > +                             msg->reply_size, reply.hdr.size);
> > +                     ret = -EINVAL;
> > +             }
> > +
> > +             /* read the message */
> > +             if (msg->reply_size > 0)
> > +                     sof_mailbox_read(sdev, sdev->host_box.offset,
> > +                                      msg->reply_data, msg->reply_size);
> > +     }
> > +
> > +     msg->reply_error = ret;
> > +}
>
> Assuming reply.hdr.size is coming from HW IPC regs, msg object is
> representing application side - SW, kernel. If so, is msg->reply_size
> value an estimated size (which can be overestimated since exact size may
> be unknown by the host) -or- the exact size of incoming IPC reply?
>

I would say msg->reply_size is the exact size of incoming IPC. At least for this
example:

Look at sound/soc/sof/pcm.c

sof_pcm_trigger

-> sof_ipc_tx_message(..,..,&reply, sizeof(reply))

msg->reply_size = sizeof(reply).

On the firmware side:

https://github.com/thesofproject/sof/blob/master/src/ipc/handler.c#L912
reply.rhdr.hdr.size = sizeof(reply);

> The estimated-case is usually permissive as long as assumed size is >=
> reply.hdr.size - dev_err needed. In the exact-case, it should be viewed
> as a requirement. If such "requirement" fails, is it valid to read
> mailbox regardless? Is this to extract some error-debug payload sent by FW?
>
> Just curious, please feel free to correct me here, Pierre.

If you think an improvement can be done, please send a patch :).

thanks,
Daniel.
Pierre-Louis Bossart Aug. 19, 2019, 3:21 p.m. UTC | #3
On 8/17/19 10:21 AM, Cezary Rojewski wrote:
> On 2019-08-15 17:44, Pierre-Louis Bossart wrote:
>> From: Daniel Baluta <daniel.baluta@nxp.com>
>>
>> Add support for the audio DSP hardware found on NXP i.MX8 platform.
>>
>> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
>> Signed-off-by: Pierre-Louis Bossart 
>> <pierre-louis.bossart@linux.intel.com>
>> +static void imx8_get_reply(struct snd_sof_dev *sdev)
>> +{
>> +    struct snd_sof_ipc_msg *msg = sdev->msg;
>> +    struct sof_ipc_reply reply;
>> +    int ret = 0;
>> +
>> +    if (!msg) {
>> +        dev_warn(sdev->dev, "unexpected ipc interrupt\n");
>> +        return;
>> +    }
>> +
>> +    /* get reply */
>> +    sof_mailbox_read(sdev, sdev->host_box.offset, &reply, 
>> sizeof(reply));
>> +
>> +    if (reply.error < 0) {
>> +        memcpy(msg->reply_data, &reply, sizeof(reply));
>> +        ret = reply.error;
>> +    } else {
>> +        /* reply has correct size? */
>> +        if (reply.hdr.size != msg->reply_size) {
>> +            dev_err(sdev->dev, "error: reply expected %zu got %u 
>> bytes\n",
>> +                msg->reply_size, reply.hdr.size);
>> +            ret = -EINVAL;
>> +        }
>> +
>> +        /* read the message */
>> +        if (msg->reply_size > 0)
>> +            sof_mailbox_read(sdev, sdev->host_box.offset,
>> +                     msg->reply_data, msg->reply_size);
>> +    }
>> +
>> +    msg->reply_error = ret;
>> +}
> 
> Assuming reply.hdr.size is coming from HW IPC regs, msg object is 
> representing application side - SW, kernel. If so, is msg->reply_size 
> value an estimated size (which can be overestimated since exact size may 
> be unknown by the host) -or- the exact size of incoming IPC reply?
> 
> The estimated-case is usually permissive as long as assumed size is >= 
> reply.hdr.size - dev_err needed. In the exact-case, it should be viewed 
> as a requirement. If such "requirement" fails, is it valid to read 
> mailbox regardless? Is this to extract some error-debug payload sent by FW?
> 
> Just curious, please feel free to correct me here, Pierre.

I don't quite understand the question. There is no use of HW IPC 
registers (as done in SKL) since this is not portable across hardware. 
There *may* be information sent over IPC registers but that would have 
to be done in platform-specific ways - as will be done for Intel to e.g. 
avoid using memory windows that may not be powered.
Cezary Rojewski Aug. 19, 2019, 9:16 p.m. UTC | #4
On 2019-08-19 17:21, Pierre-Louis Bossart wrote:
> On 8/17/19 10:21 AM, Cezary Rojewski wrote:
>> On 2019-08-15 17:44, Pierre-Louis Bossart wrote:
>>> From: Daniel Baluta <daniel.baluta@nxp.com>
>>>
>>> Add support for the audio DSP hardware found on NXP i.MX8 platform.
>>>
>>> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
>>> Signed-off-by: Pierre-Louis Bossart 
>>> <pierre-louis.bossart@linux.intel.com>
>>> +static void imx8_get_reply(struct snd_sof_dev *sdev)
>>> +{
>>> +    struct snd_sof_ipc_msg *msg = sdev->msg;
>>> +    struct sof_ipc_reply reply;
>>> +    int ret = 0;
>>> +
>>> +    if (!msg) {
>>> +        dev_warn(sdev->dev, "unexpected ipc interrupt\n");
>>> +        return;
>>> +    }
>>> +
>>> +    /* get reply */
>>> +    sof_mailbox_read(sdev, sdev->host_box.offset, &reply, 
>>> sizeof(reply));
>>> +
>>> +    if (reply.error < 0) {
>>> +        memcpy(msg->reply_data, &reply, sizeof(reply));
>>> +        ret = reply.error;
>>> +    } else {
>>> +        /* reply has correct size? */
>>> +        if (reply.hdr.size != msg->reply_size) {
>>> +            dev_err(sdev->dev, "error: reply expected %zu got %u 
>>> bytes\n",
>>> +                msg->reply_size, reply.hdr.size);
>>> +            ret = -EINVAL;
>>> +        }
>>> +
>>> +        /* read the message */
>>> +        if (msg->reply_size > 0)
>>> +            sof_mailbox_read(sdev, sdev->host_box.offset,
>>> +                     msg->reply_data, msg->reply_size);
>>> +    }
>>> +
>>> +    msg->reply_error = ret;
>>> +}
>>
>> Assuming reply.hdr.size is coming from HW IPC regs, msg object is 
>> representing application side - SW, kernel. If so, is msg->reply_size 
>> value an estimated size (which can be overestimated since exact size 
>> may be unknown by the host) -or- the exact size of incoming IPC reply?
>>
>> The estimated-case is usually permissive as long as assumed size is >= 
>> reply.hdr.size - dev_err needed. In the exact-case, it should be 
>> viewed as a requirement. If such "requirement" fails, is it valid to 
>> read mailbox regardless? Is this to extract some error-debug payload 
>> sent by FW?
>>
>> Just curious, please feel free to correct me here, Pierre.
> 
> I don't quite understand the question. There is no use of HW IPC 
> registers (as done in SKL) since this is not portable across hardware. 
> There *may* be information sent over IPC registers but that would have 
> to be done in platform-specific ways - as will be done for Intel to e.g. 
> avoid using memory windows that may not be powered.

TLDR:
Was wondering about sof_mailbox_read being invoked regardless of 
size-check outcome (dev_err reports size mismatch after all).

Given your answer, guess the error-payload may still be sent back so 
it's preferable to read the uplink despite the unexpected circumstances 
- size mismatch.
diff mbox series

Patch

diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig
index 01acb580b817..bb8036ae567e 100644
--- a/sound/soc/sof/Kconfig
+++ b/sound/soc/sof/Kconfig
@@ -173,6 +173,7 @@  config SND_SOC_SOF_PROBE_WORK_QUEUE
 	  When selected, the probe is handled in two steps, for example to
 	  avoid lockdeps if request_module is used in the probe.
 
+source "sound/soc/sof/imx/Kconfig"
 source "sound/soc/sof/intel/Kconfig"
 source "sound/soc/sof/xtensa/Kconfig"
 
diff --git a/sound/soc/sof/Makefile b/sound/soc/sof/Makefile
index 772c452d1ae2..b0a6f01bdc44 100644
--- a/sound/soc/sof/Makefile
+++ b/sound/soc/sof/Makefile
@@ -18,4 +18,5 @@  obj-$(CONFIG_SND_SOC_SOF_OF) += snd-sof-of.o
 obj-$(CONFIG_SND_SOC_SOF_PCI) += snd-sof-pci.o
 
 obj-$(CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL) += intel/
+obj-$(CONFIG_SND_SOC_SOF_IMX_TOPLEVEL) += imx/
 obj-$(CONFIG_SND_SOC_SOF_XTENSA) += xtensa/
diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig
new file mode 100644
index 000000000000..fd73d8402dbf
--- /dev/null
+++ b/sound/soc/sof/imx/Kconfig
@@ -0,0 +1,22 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+
+config SND_SOC_SOF_IMX_TOPLEVEL
+	bool "SOF support for NXP i.MX audio DSPs"
+	depends on ARM64 && SND_SOC_SOF_OF || COMPILE_TEST
+	help
+          This adds support for Sound Open Firmware for NXP i.MX platforms.
+          Say Y if you have such a device.
+          If unsure select "N".
+
+if SND_SOC_SOF_IMX_TOPLEVEL
+
+config SND_SOC_SOF_IMX8
+	tristate "SOF support for i.MX8"
+	depends on IMX_SCU
+	depends on IMX_DSP
+	help
+          This adds support for Sound Open Firmware for NXP i.MX8 platforms
+          Say Y if you have such a device.
+          If unsure select "N".
+
+endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
diff --git a/sound/soc/sof/imx/Makefile b/sound/soc/sof/imx/Makefile
new file mode 100644
index 000000000000..6ef908e8c807
--- /dev/null
+++ b/sound/soc/sof/imx/Makefile
@@ -0,0 +1,4 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+snd-sof-imx8-objs := imx8.o
+
+obj-$(CONFIG_SND_SOC_SOF_IMX8) += snd-sof-imx8.o
diff --git a/sound/soc/sof/imx/imx8.c b/sound/soc/sof/imx/imx8.c
new file mode 100644
index 000000000000..e502f584207f
--- /dev/null
+++ b/sound/soc/sof/imx/imx8.c
@@ -0,0 +1,394 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// Copyright 2019 NXP
+//
+// Author: Daniel Baluta <daniel.baluta@nxp.com>
+//
+// Hardware interface for audio DSP on i.MX8
+
+#include <linux/firmware.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm_domain.h>
+
+#include <linux/module.h>
+#include <sound/sof.h>
+#include <sound/sof/xtensa.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/dsp.h>
+
+#include <linux/firmware/imx/svc/misc.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include "../ops.h"
+
+/* DSP memories */
+#define IRAM_OFFSET		0x10000
+#define IRAM_SIZE		(2 * 1024)
+#define DRAM0_OFFSET		0x0
+#define DRAM0_SIZE		(32 * 1024)
+#define DRAM1_OFFSET		0x8000
+#define DRAM1_SIZE		(32 * 1024)
+#define SYSRAM_OFFSET		0x18000
+#define SYSRAM_SIZE		(256 * 1024)
+#define SYSROM_OFFSET		0x58000
+#define SYSROM_SIZE		(192 * 1024)
+
+#define RESET_VECTOR_VADDR	0x596f8000
+
+#define MBOX_OFFSET	0x800000
+#define MBOX_SIZE	0x1000
+
+struct imx8_priv {
+	struct device *dev;
+	struct snd_sof_dev *sdev;
+
+	/* DSP IPC handler */
+	struct imx_dsp_ipc *dsp_ipc;
+	struct platform_device *ipc_dev;
+
+	/* System Controller IPC handler */
+	struct imx_sc_ipc *sc_ipc;
+
+	/* Power domain handling */
+	int num_domains;
+	struct device **pd_dev;
+	struct device_link **link;
+
+};
+
+static void imx8_get_reply(struct snd_sof_dev *sdev)
+{
+	struct snd_sof_ipc_msg *msg = sdev->msg;
+	struct sof_ipc_reply reply;
+	int ret = 0;
+
+	if (!msg) {
+		dev_warn(sdev->dev, "unexpected ipc interrupt\n");
+		return;
+	}
+
+	/* get reply */
+	sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
+
+	if (reply.error < 0) {
+		memcpy(msg->reply_data, &reply, sizeof(reply));
+		ret = reply.error;
+	} else {
+		/* reply has correct size? */
+		if (reply.hdr.size != msg->reply_size) {
+			dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
+				msg->reply_size, reply.hdr.size);
+			ret = -EINVAL;
+		}
+
+		/* read the message */
+		if (msg->reply_size > 0)
+			sof_mailbox_read(sdev, sdev->host_box.offset,
+					 msg->reply_data, msg->reply_size);
+	}
+
+	msg->reply_error = ret;
+}
+
+static int imx8_get_mailbox_offset(struct snd_sof_dev *sdev)
+{
+	return MBOX_OFFSET;
+}
+
+static int imx8_get_window_offset(struct snd_sof_dev *sdev, u32 id)
+{
+	return MBOX_OFFSET;
+}
+
+void imx8_dsp_handle_reply(struct imx_dsp_ipc *ipc)
+{
+	struct imx8_priv *priv = imx_dsp_get_data(ipc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
+	imx8_get_reply(priv->sdev);
+	snd_sof_ipc_reply(priv->sdev, 0);
+	spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
+}
+
+void imx8_dsp_handle_request(struct imx_dsp_ipc *ipc)
+{
+	struct imx8_priv *priv = imx_dsp_get_data(ipc);
+
+	snd_sof_ipc_msgs_rx(priv->sdev);
+}
+
+struct imx_dsp_ops dsp_ops = {
+	.handle_reply		= imx8_dsp_handle_reply,
+	.handle_request		= imx8_dsp_handle_request,
+};
+
+static int imx8_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
+{
+	struct imx8_priv *priv = (struct imx8_priv *)sdev->private;
+
+	sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+			  msg->msg_size);
+	imx_dsp_ring_doorbell(priv->dsp_ipc, 0);
+
+	return 0;
+}
+
+/*
+ * DSP control.
+ */
+static int imx8_run(struct snd_sof_dev *sdev)
+{
+	struct imx8_priv *dsp_priv = (struct imx8_priv *)sdev->private;
+	int ret;
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_SEL, 1);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset source select\n");
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_AUDIO, 0x80);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of AUDIO\n");
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_PERIPH, 0x5A);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of PERIPH %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = imx_sc_misc_set_control(dsp_priv->sc_ipc, IMX_SC_R_DSP,
+				      IMX_SC_C_OFS_IRQ, 0x51);
+	if (ret < 0) {
+		dev_err(sdev->dev, "Error system address offset of IRQ\n");
+		return ret;
+	}
+
+	imx_sc_pm_cpu_start(dsp_priv->sc_ipc, IMX_SC_R_DSP, true,
+			    RESET_VECTOR_VADDR);
+
+	return 0;
+}
+
+static int imx8_probe(struct snd_sof_dev *sdev)
+{
+	struct platform_device *pdev =
+		container_of(sdev->dev, struct platform_device, dev);
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *res_node;
+	struct resource *mmio;
+	struct imx8_priv *priv;
+	struct resource res;
+	u32 base, size;
+	int ret = 0;
+	int i;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	sdev->private = priv;
+	priv->dev = sdev->dev;
+	priv->sdev = sdev;
+
+	/* power up device associated power domains */
+	priv->num_domains = of_count_phandle_with_args(np, "power-domains",
+						       "#power-domain-cells");
+	if (priv->num_domains < 0) {
+		dev_err(sdev->dev, "no power-domains property in %pOF\n", np);
+		return priv->num_domains;
+	}
+
+	priv->pd_dev = devm_kmalloc_array(&pdev->dev, priv->num_domains,
+					  sizeof(*priv->pd_dev), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->link = devm_kmalloc_array(&pdev->dev, priv->num_domains,
+					sizeof(*priv->link), GFP_KERNEL);
+	if (!priv->link)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->num_domains; i++) {
+		priv->pd_dev[i] = dev_pm_domain_attach_by_id(&pdev->dev, i);
+		if (IS_ERR(priv->pd_dev[i])) {
+			ret = PTR_ERR(priv->pd_dev[i]);
+			goto exit_unroll_pm;
+		}
+		priv->link[i] = device_link_add(&pdev->dev, priv->pd_dev[i],
+						DL_FLAG_STATELESS |
+						DL_FLAG_PM_RUNTIME |
+						DL_FLAG_RPM_ACTIVE);
+		if (IS_ERR(priv->link[i])) {
+			ret = PTR_ERR(priv->link[i]);
+			dev_pm_domain_detach(priv->pd_dev[i], false);
+			goto exit_unroll_pm;
+		}
+	}
+
+	ret = imx_scu_get_handle(&priv->sc_ipc);
+	if (ret) {
+		dev_err(sdev->dev, "Cannot obtain SCU handle (err = %d)\n",
+			ret);
+		goto exit_unroll_pm;
+	}
+
+	priv->ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
+						      PLATFORM_DEVID_NONE,
+						      pdev, sizeof(*pdev));
+	if (IS_ERR(priv->ipc_dev)) {
+		ret = PTR_ERR(priv->ipc_dev);
+		goto exit_unroll_pm;
+	}
+
+	priv->dsp_ipc = dev_get_drvdata(&priv->ipc_dev->dev);
+	if (!priv->dsp_ipc) {
+		/* DSP IPC driver not probed yet, try later */
+		ret = -EPROBE_DEFER;
+		dev_err(sdev->dev, "Failed to get drvdata\n");
+		goto exit_pdev_unregister;
+	}
+
+	imx_dsp_set_data(priv->dsp_ipc, priv);
+	priv->dsp_ipc->ops = &dsp_ops;
+
+	/* DSP base */
+	mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mmio) {
+		base = mmio->start;
+		size = resource_size(mmio);
+	} else {
+		dev_err(sdev->dev, "error: failed to get DSP base at idx 0\n");
+		ret = -EINVAL;
+		goto exit_pdev_unregister;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_IRAM] = devm_ioremap(sdev->dev, base, size);
+	if (!sdev->bar[SOF_FW_BLK_TYPE_IRAM]) {
+		dev_err(sdev->dev, "failed to ioremap base 0x%x size 0x%x\n",
+			base, size);
+		ret = -ENODEV;
+		goto exit_pdev_unregister;
+	}
+	sdev->mmio_bar = SOF_FW_BLK_TYPE_IRAM;
+
+	res_node = of_parse_phandle(np, "memory-region", 0);
+	if (!res_node) {
+		dev_err(&pdev->dev, "failed to get memory region node\n");
+		ret = -ENODEV;
+		goto exit_pdev_unregister;
+	}
+
+	ret = of_address_to_resource(res_node, 0, &res);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get reserved region address\n");
+		goto exit_pdev_unregister;
+	}
+
+	sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, res.start,
+							  res.end - res.start +
+							  1);
+	if (IS_ERR(sdev->bar[SOF_FW_BLK_TYPE_SRAM])) {
+		dev_err(sdev->dev, "failed to ioremap mem 0x%x size 0x%x\n",
+			base, size);
+		ret = PTR_ERR(sdev->bar[SOF_FW_BLK_TYPE_SRAM]);
+		goto exit_pdev_unregister;
+	}
+	sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
+
+	return 0;
+
+exit_pdev_unregister:
+	platform_device_unregister(priv->ipc_dev);
+exit_unroll_pm:
+	while (--i >= 0) {
+		device_link_del(priv->link[i]);
+		dev_pm_domain_detach(priv->pd_dev[i], false);
+	}
+
+	return ret;
+}
+
+static int imx8_remove(struct snd_sof_dev *sdev)
+{
+	struct imx8_priv *priv = (struct imx8_priv *)sdev->private;
+	int i;
+
+	platform_device_unregister(priv->ipc_dev);
+
+	for (i = 0; i < priv->num_domains; i++) {
+		device_link_del(priv->link[i]);
+		dev_pm_domain_detach(priv->pd_dev[i], false);
+	}
+
+	return 0;
+}
+
+/* on i.MX8 there is 1 to 1 match between type and BAR idx */
+int imx8_get_bar_index(struct snd_sof_dev *sdev, u32 type)
+{
+	return type;
+}
+
+void imx8_ipc_msg_data(struct snd_sof_dev *sdev,
+		       struct snd_pcm_substream *substream,
+		       void *p, size_t sz)
+{
+	sof_mailbox_read(sdev, sdev->dsp_box.offset, p, sz);
+}
+
+int imx8_ipc_pcm_params(struct snd_sof_dev *sdev,
+			struct snd_pcm_substream *substream,
+			const struct sof_ipc_pcm_params_reply *reply)
+{
+	return 0;
+}
+
+static struct snd_soc_dai_driver imx8_dai[] = {
+{
+	.name = "esai-port",
+},
+};
+
+/* i.MX8  ops */
+struct snd_sof_dsp_ops sof_imx8_ops = {
+	/* probe and remove */
+	.probe		= imx8_probe,
+	.remove		= imx8_remove,
+	/* DSP core boot */
+	.run		= imx8_run,
+
+	/* Block IO */
+	.block_read	= sof_block_read,
+	.block_write	= sof_block_write,
+
+	/* ipc */
+	.send_msg	= imx8_send_msg,
+	.fw_ready	= sof_fw_ready,
+	.get_mailbox_offset	= imx8_get_mailbox_offset,
+	.get_window_offset	= imx8_get_window_offset,
+
+	.ipc_msg_data	= imx8_ipc_msg_data,
+	.ipc_pcm_params	= imx8_ipc_pcm_params,
+
+	/* module loading */
+	.load_module	= snd_sof_parse_module_memcpy,
+	.get_bar_index	= imx8_get_bar_index,
+	/* firmware loading */
+	.load_firmware	= snd_sof_load_firmware_memcpy,
+
+	/* DAI drivers */
+	.drv = imx8_dai,
+	.num_drv = 1, /* we have only 1 ESAI interface on i.MX8 */
+};
+EXPORT_SYMBOL(sof_imx8_ops);
+
+MODULE_LICENSE("Dual BSD/GPL");