diff mbox series

[RESEND,v4,3/4] dt-bindings: ASoC: Add WSA881x bindings

Message ID 20190822233759.12663-4-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series ASoC: codecs: Add WSA881x Smart Speaker amplifier support | expand

Commit Message

Srinivas Kandagatla Aug. 22, 2019, 11:37 p.m. UTC
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../bindings/sound/qcom,wsa881x.yaml          | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml

Comments

Rob Herring Aug. 27, 2019, 12:20 p.m. UTC | #1
On Thu, Aug 22, 2019 at 6:38 PM Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:
>
> This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
> Amplifier. This Amplifier also has a simple thermal sensor for
> over temperature and speaker protection.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../bindings/sound/qcom,wsa881x.yaml          | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
> new file mode 100644
> index 000000000000..ad718d75c660
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
> @@ -0,0 +1,44 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +allOf:
> +  - $ref: "soundwire-controller.yaml#"

This is not the controller, so this should not be included here. You
should get lots of warnings from doing so. You did run 'make
dt_binding_check', right?

> +
> +properties:
> +  compatible:
> +    const: sdw10217201000
> +
> +  reg:
> +    maxItems: 1
> +
> +  pd-gpios:

powerdown-gpios is the standard name.

> +    description: GPIO spec for Powerdown/Shutdown line to use
> +    maxItems: 1
> +
> +  "#thermal-sensor-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - pd-gpios
> +  - #thermal-sensor-cells
> +
> +examples:
> +  - |
> +    efuse@1c23800 {
> +        compatible = "allwinner,sun4i-a10-sid";

Huh?

> +        reg = <0x01c23800 0x10>;
> +        pd-gpios = <&wcdpinctrl 2 0>;
> +        #thermal-sensor-cells = <0>;
> +    };
> +
> +...
> --
> 2.21.0
>
Srinivas Kandagatla Aug. 27, 2019, 8:25 p.m. UTC | #2
Thanks for taking time to review!

On 27/08/2019 13:20, Rob Herring wrote:
> On Thu, Aug 22, 2019 at 6:38 PM Srinivas Kandagatla
> <srinivas.kandagatla@linaro.org> wrote:
>>
>> This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
>> Amplifier. This Amplifier also has a simple thermal sensor for
>> over temperature and speaker protection.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   .../bindings/sound/qcom,wsa881x.yaml          | 44 +++++++++++++++++++
>>   1 file changed, 44 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
>> new file mode 100644
>> index 000000000000..ad718d75c660
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
>> @@ -0,0 +1,44 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
>> +
>> +maintainers:
>> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> +
>> +allOf:
>> +  - $ref: "soundwire-controller.yaml#"
> 
> This is not the controller, so this should not be included here. You
> should get lots of warnings from doing so. You did run 'make
> dt_binding_check', right?

no, I was not aware of this command! will run that before sending next 
version.


> 
>> +
>> +properties:
>> +  compatible:
>> +    const: sdw10217201000
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  pd-gpios:
> 
> powerdown-gpios is the standard name.
> 
sounds good to me, will change this in next version!

>> +    description: GPIO spec for Powerdown/Shutdown line to use
>> +    maxItems: 1
>> +
>> +  "#thermal-sensor-cells":
>> +    const: 0
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - pd-gpios
>> +  - #thermal-sensor-cells
>> +
>> +examples:
>> +  - |
>> +    efuse@1c23800 {
>> +        compatible = "allwinner,sun4i-a10-sid";
> 
> Huh?

Opps! copy paste bugs!!! :-)

> 
>> +        reg = <0x01c23800 0x10>;
>> +        pd-gpios = <&wcdpinctrl 2 0>;
>> +        #thermal-sensor-cells = <0>;
>> +    };
>> +
>> +...
>> --
>> 2.21.0
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
new file mode 100644
index 000000000000..ad718d75c660
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
@@ -0,0 +1,44 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: "soundwire-controller.yaml#"
+
+properties:
+  compatible:
+    const: sdw10217201000
+
+  reg:
+    maxItems: 1
+
+  pd-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - pd-gpios
+  - #thermal-sensor-cells
+
+examples:
+  - |
+    efuse@1c23800 {
+        compatible = "allwinner,sun4i-a10-sid";
+        reg = <0x01c23800 0x10>;
+        pd-gpios = <&wcdpinctrl 2 0>;
+        #thermal-sensor-cells = <0>;
+    };
+
+...