diff mbox series

ASoC: codecs: ad193x: make two arrays static const, makes object smaller

Message ID 20190906161404.1440-1-colin.king@canonical.com (mailing list archive)
State Accepted
Commit 78b93b04771bdbefe94b84222506ba992f579c98
Headers show
Series ASoC: codecs: ad193x: make two arrays static const, makes object smaller | expand

Commit Message

Colin King Sept. 6, 2019, 4:14 p.m. UTC
From: Colin Ian King <colin.king@canonical.com>

Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 37 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  16253	   7200	      0	  23453	   5b9d	sound/soc/codecs/ad193x.o

After:
   text	   data	    bss	    dec	    hex	filename
  16056	   7360	      0	  23416	   5b78	sound/soc/codecs/ad193x.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 sound/soc/codecs/ad193x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index fb04c9379b71..980e024a5720 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -416,7 +416,7 @@  static struct snd_soc_dai_driver ad193x_no_adc_dai = {
 /* codec register values to set after reset */
 static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
 {
-	const struct reg_sequence reg_init[] = {
+	static const struct reg_sequence reg_init[] = {
 		{  0, 0x99 },	/* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
 		{  1, 0x04 },	/* PLL_CLK_CTRL1: no on-chip Vref */
 		{  2, 0x40 },	/* DAC_CTRL0: TDM mode */
@@ -432,7 +432,7 @@  static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
 		{ 12, 0x00 },	/* DAC_L4_VOL: no attenuation */
 		{ 13, 0x00 },	/* DAC_R4_VOL: no attenuation */
 	};
-	const struct reg_sequence reg_adc_init[] = {
+	static const struct reg_sequence reg_adc_init[] = {
 		{ 14, 0x03 },	/* ADC_CTRL0: high-pass filter enable */
 		{ 15, 0x43 },	/* ADC_CTRL1: sata delay=1, adc aux mode */
 		{ 16, 0x00 },	/* ADC_CTRL2: reset */