@@ -395,6 +395,7 @@ CONFIG_SND_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_SOC_OMAP_HDMI=m
CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
+CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_HID_GENERIC=m
@@ -82,7 +82,8 @@ static int tas2770_codec_suspend(struct snd_soc_component *component)
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_SHUTDOWN);
- if (ret)
+
+ if (ret < 0)
return ret;
return 0;
@@ -96,8 +97,9 @@ static int tas2770_codec_resume(struct snd_soc_component *component)
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_ACTIVE);
- if (ret)
- return -EINVAL;
+
+ if (ret < 0)
+ return ret;
return 0;
}
@@ -149,7 +151,10 @@ static int tas2770_dac_event(struct snd_soc_dapm_widget *w,
}
end:
- return ret;
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static const struct snd_kcontrol_new isense_switch =
@@ -199,7 +204,10 @@ static int tas2770_mute(struct snd_soc_dai *dai, int mute)
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_ACTIVE);
- return ret;
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
@@ -252,7 +260,10 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
tas2770->i_sense_slot);
end:
- return ret;
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
@@ -344,9 +355,11 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
}
end:
- if (!ret)
- tas2770->sampling_rate = samplerate;
- return ret;
+ if (ret < 0)
+ return ret;
+
+ tas2770->sampling_rate = samplerate;
+ return 0;
}
static int tas2770_hw_params(struct snd_pcm_substream *substream,
@@ -426,7 +439,7 @@ static int tas2770_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG1,
TAS2770_TDM_CFG_REG1_MASK,
(tdm_rx_start_slot << TAS2770_TDM_CFG_REG1_51_SHIFT));
- if (ret)
+ if (ret < 0)
return ret;
value = snd_soc_component_read32(component, TAS2770_TDM_CFG_REG3);
@@ -472,12 +485,12 @@ static int tas2770_set_dai_tdm_slot(struct snd_soc_dai *dai,
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG3,
TAS2770_TDM_CFG_REG3_30_MASK,
(left_slot << TAS2770_TDM_CFG_REG3_30_SHIFT));
- if (ret)
+ if (ret < 0)
return ret;
ret = snd_soc_component_update_bits(component, TAS2770_TDM_CFG_REG3,
TAS2770_TDM_CFG_REG3_RXS_MASK,
(right_slot << TAS2770_TDM_CFG_REG3_RXS_SHIFT));
- if (ret)
+ if (ret < 0)
return ret;
switch (slot_width) {
@@ -511,10 +524,11 @@ static int tas2770_set_dai_tdm_slot(struct snd_soc_dai *dai,
ret = -EINVAL;
}
- if (!ret)
- tas2770->slot_width = slot_width;
+ if (ret < 0)
+ return ret;
- return ret;
+ tas2770->slot_width = slot_width;
+ return 0;
}
static struct snd_soc_dai_ops tas2770_dai_ops = {
According the documentation for snd_soc_update_bits the API will return a 1 if the update was successful with a value change, a 0 if the update was successful with no value change or a negative if the command just failed. So the value of return in the driver needs to be checked for being less then 0 or the caller may indicate failure when the value actually changed. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- arch/arm/configs/omap2plus_defconfig | 1 + sound/soc/codecs/tas2770.c | 44 ++++++++++++++++++---------- 2 files changed, 30 insertions(+), 15 deletions(-)