diff mbox series

[v4,3/7] ASoC: tegra: i2s: Add support for more than 2 channels

Message ID 20191007153136.4920-4-ben.dooks@codethink.co.uk (mailing list archive)
State New, archived
Headers show
Series [v4,1/7] ASoC: tegra: add a TDM configuration callback | expand

Commit Message

Ben Dooks Oct. 7, 2019, 3:31 p.m. UTC 
From: Edward Cragg <edward.cragg@codethink.co.uk>

The CIF configuration and clock setting is currently hard coded for 2
channels. Since the hardware is capable of supporting 1-8 channels add
support for reading the channel count from the supplied parameters to
allow for better TDM support. It seems the original implementation of this
driver was fixed at 2 channels for simplicity, and not implementing TDM.

Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
[ben.dooks@codethink.co.uk: merge edge control into set-format]
[ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

Comments

Dmitry Osipenko Oct. 8, 2019, 3:29 p.m. UTC | #1 
Hello Ben,

07.10.2019 18:31, Ben Dooks пишет:
> From: Edward Cragg <edward.cragg@codethink.co.uk>
> 
> The CIF configuration and clock setting is currently hard coded for 2
> channels. Since the hardware is capable of supporting 1-8 channels add
> support for reading the channel count from the supplied parameters to
> allow for better TDM support. It seems the original implementation of this
> driver was fixed at 2 channels for simplicity, and not implementing TDM.
> 
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
> [ben.dooks@codethink.co.uk: merge edge control into set-format]
> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
>  sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
> index 063f34c882af..7382f7949bf4 100644
> --- a/sound/soc/tegra/tegra30_i2s.c
> +++ b/sound/soc/tegra/tegra30_i2s.c
> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>  {
>  	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>  	unsigned int mask = 0, val = 0;
> +	unsigned int ch_mask, ch_val = 0;
>  
>  	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>  	case SND_SOC_DAIFMT_NB_NF:
> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>  		return -EINVAL;
>  	}
>  
> +	ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
>  	mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
>  	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>  	case SND_SOC_DAIFMT_CBS_CFS:
> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>  		TEGRA30_I2S_CTRL_LRCK_MASK;
>  	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>  	case SND_SOC_DAIFMT_DSP_A:
> +		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>  		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
>  		val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
>  		break;
>  	case SND_SOC_DAIFMT_DSP_B:
> +		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;

Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here.
Or does DSP_B happen to work with the NEG_EDGE?

[snip]
Ben Dooks Oct. 17, 2019, 4:23 p.m. UTC | #2 
On 08/10/2019 16:29, Dmitry Osipenko wrote:
> Hello Ben,
> 
> 07.10.2019 18:31, Ben Dooks пишет:
>> From: Edward Cragg <edward.cragg@codethink.co.uk>
>>
>> The CIF configuration and clock setting is currently hard coded for 2
>> channels. Since the hardware is capable of supporting 1-8 channels add
>> support for reading the channel count from the supplied parameters to
>> allow for better TDM support. It seems the original implementation of this
>> driver was fixed at 2 channels for simplicity, and not implementing TDM.
>>
>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
>> [ben.dooks@codethink.co.uk: merge edge control into set-format]
>> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
>> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
>> ---
>>   sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
>>   1 file changed, 13 insertions(+), 8 deletions(-)
>>
>> diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
>> index 063f34c882af..7382f7949bf4 100644
>> --- a/sound/soc/tegra/tegra30_i2s.c
>> +++ b/sound/soc/tegra/tegra30_i2s.c
>> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>>   {
>>   	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>   	unsigned int mask = 0, val = 0;
>> +	unsigned int ch_mask, ch_val = 0;
>>   
>>   	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>>   	case SND_SOC_DAIFMT_NB_NF:
>> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>>   		return -EINVAL;
>>   	}
>>   
>> +	ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
>>   	mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
>>   	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>>   	case SND_SOC_DAIFMT_CBS_CFS:
>> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
>>   		TEGRA30_I2S_CTRL_LRCK_MASK;
>>   	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>>   	case SND_SOC_DAIFMT_DSP_A:
>> +		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>>   		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
>>   		val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
>>   		break;
>>   	case SND_SOC_DAIFMT_DSP_B:
>> +		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
> 
> Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here.
> Or does DSP_B happen to work with the NEG_EDGE?

ok, will change, we've only been using SND_SOC_DAIFMT_DSP_A

For reference, is there a git repo with this version of tegra tdm support?
Dmitry Osipenko Oct. 17, 2019, 5:38 p.m. UTC | #3 
17.10.2019 19:23, Ben Dooks пишет:
> On 08/10/2019 16:29, Dmitry Osipenko wrote:
>> Hello Ben,
>>
>> 07.10.2019 18:31, Ben Dooks пишет:
>>> From: Edward Cragg <edward.cragg@codethink.co.uk>
>>>
>>> The CIF configuration and clock setting is currently hard coded for 2
>>> channels. Since the hardware is capable of supporting 1-8 channels add
>>> support for reading the channel count from the supplied parameters to
>>> allow for better TDM support. It seems the original implementation of
>>> this
>>> driver was fixed at 2 channels for simplicity, and not implementing TDM.
>>>
>>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>>> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
>>> [ben.dooks@codethink.co.uk: merge edge control into set-format]
>>> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
>>> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
>>> ---
>>>   sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
>>>   1 file changed, 13 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>> b/sound/soc/tegra/tegra30_i2s.c
>>> index 063f34c882af..7382f7949bf4 100644
>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>> *dai,
>>>   {
>>>       struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>>       unsigned int mask = 0, val = 0;
>>> +    unsigned int ch_mask, ch_val = 0;
>>>         switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>>>       case SND_SOC_DAIFMT_NB_NF:
>>> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>> *dai,
>>>           return -EINVAL;
>>>       }
>>>   +    ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
>>>       mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
>>>       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>>>       case SND_SOC_DAIFMT_CBS_CFS:
>>> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>> *dai,
>>>           TEGRA30_I2S_CTRL_LRCK_MASK;
>>>       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>>>       case SND_SOC_DAIFMT_DSP_A:
>>> +        ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>>>           val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
>>>           val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
>>>           break;
>>>       case SND_SOC_DAIFMT_DSP_B:
>>> +        ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>>
>> Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here.
>> Or does DSP_B happen to work with the NEG_EDGE?
> 
> ok, will change, we've only been using SND_SOC_DAIFMT_DSP_A
> 
> For reference, is there a git repo with this version of tegra tdm support?

Looks like all downstream kernels that supported T30 are doing the same
thing.

Take a look here for example:

https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=49834eef9d51a6eff950e0f52ddc5343d960652e
Jon Hunter Oct. 24, 2019, 4:11 p.m. UTC | #4 
On 17/10/2019 18:38, Dmitry Osipenko wrote:
> 17.10.2019 19:23, Ben Dooks пишет:
>> On 08/10/2019 16:29, Dmitry Osipenko wrote:
>>> Hello Ben,
>>>
>>> 07.10.2019 18:31, Ben Dooks пишет:
>>>> From: Edward Cragg <edward.cragg@codethink.co.uk>
>>>>
>>>> The CIF configuration and clock setting is currently hard coded for 2
>>>> channels. Since the hardware is capable of supporting 1-8 channels add
>>>> support for reading the channel count from the supplied parameters to
>>>> allow for better TDM support. It seems the original implementation of
>>>> this
>>>> driver was fixed at 2 channels for simplicity, and not implementing TDM.
>>>>
>>>> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
>>>> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
>>>> [ben.dooks@codethink.co.uk: merge edge control into set-format]
>>>> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
>>>> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
>>>> ---
>>>>   sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
>>>>   1 file changed, 13 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/sound/soc/tegra/tegra30_i2s.c
>>>> b/sound/soc/tegra/tegra30_i2s.c
>>>> index 063f34c882af..7382f7949bf4 100644
>>>> --- a/sound/soc/tegra/tegra30_i2s.c
>>>> +++ b/sound/soc/tegra/tegra30_i2s.c
>>>> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>>> *dai,
>>>>   {
>>>>       struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>>>>       unsigned int mask = 0, val = 0;
>>>> +    unsigned int ch_mask, ch_val = 0;
>>>>         switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>>>>       case SND_SOC_DAIFMT_NB_NF:
>>>> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>>> *dai,
>>>>           return -EINVAL;
>>>>       }
>>>>   +    ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
>>>>       mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
>>>>       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>>>>       case SND_SOC_DAIFMT_CBS_CFS:
>>>> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai
>>>> *dai,
>>>>           TEGRA30_I2S_CTRL_LRCK_MASK;
>>>>       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>>>>       case SND_SOC_DAIFMT_DSP_A:
>>>> +        ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>>>>           val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
>>>>           val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
>>>>           break;
>>>>       case SND_SOC_DAIFMT_DSP_B:
>>>> +        ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
>>>
>>> Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here.
>>> Or does DSP_B happen to work with the NEG_EDGE?
>>
>> ok, will change, we've only been using SND_SOC_DAIFMT_DSP_A
>>
>> For reference, is there a git repo with this version of tegra tdm support?
> 
> Looks like all downstream kernels that supported T30 are doing the same
> thing.
> 
> Take a look here for example:
> 
> https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=49834eef9d51a6eff950e0f52ddc5343d960652e

That version of the driver is known to be buggy/incorrect. I don't think
we want to do that. We want to set the polarity based upon the format
passed and not the mode ...

https://nv-tegra.nvidia.com/gitweb/?p=linux-nvidia.git;a=blob;f=sound/soc/tegra-alt/tegra210_i2s_alt.c;h=24cf3b55326f687aded22b91182df41c5ae188ac;hb=703aa948d2c92b87fd84f367f43a07778ed098b5#l333

Jon
Ben Dooks Nov. 5, 2019, 11:58 a.m. UTC | #5 
On 24/10/2019 17:11, Jon Hunter wrote:
> 
> On 17/10/2019 18:38, Dmitry Osipenko wrote:
>> 17.10.2019 19:23, Ben Dooks пишет:
>>> On 08/10/2019 16:29, Dmitry Osipenko wrote:
>>>> Hello Ben,
>> Take a look here for example:
>>
>> https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=49834eef9d51a6eff950e0f52ddc5343d960652e
> 
> That version of the driver is known to be buggy/incorrect. I don't think
> we want to do that. We want to set the polarity based upon the format
> passed and not the mode ...
> 
> https://nv-tegra.nvidia.com/gitweb/?p=linux-nvidia.git;a=blob;f=sound/soc/tegra-alt/tegra210_i2s_alt.c;h=24cf3b55326f687aded22b91182df41c5ae188ac;hb=703aa948d2c92b87fd84f367f43a07778ed098b5#l333

Ok, thanks.

PS the security certificate on that site is still invalid :/
diff mbox series

Patch

diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 063f34c882af..7382f7949bf4 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -67,6 +67,7 @@  static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 {
 	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	unsigned int mask = 0, val = 0;
+	unsigned int ch_mask, ch_val = 0;
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_NB_NF:
@@ -75,6 +76,7 @@  static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 		return -EINVAL;
 	}
 
+	ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
 	mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBS_CFS:
@@ -90,10 +92,12 @@  static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 		TEGRA30_I2S_CTRL_LRCK_MASK;
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_DSP_A:
+		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
 		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
 		val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
+		ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
 		val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
 		val |= TEGRA30_I2S_CTRL_LRCK_R_LOW;
 		break;
@@ -115,6 +119,7 @@  static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
 
 	pm_runtime_get_sync(dai->dev);
 	regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val);
+	regmap_update_bits(i2s->regmap, TEGRA30_I2S_CH_CTRL, ch_mask, ch_val);
 	pm_runtime_put(dai->dev);
 
 	return 0;
@@ -127,10 +132,11 @@  static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct device *dev = dai->dev;
 	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	unsigned int mask, val, reg;
-	int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
+	int ret, sample_size, srate, i2sclock, bitcnt, audio_bits, channels;
 	struct tegra30_ahub_cif_conf cif_conf;
 
-	if (params_channels(params) != 2)
+	channels = params_channels(params);
+	if (channels > 8)
 		return -EINVAL;
 
 	mask = TEGRA30_I2S_CTRL_BIT_SIZE_MASK;
@@ -157,9 +163,8 @@  static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
 	regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val);
 
 	srate = params_rate(params);
-
 	/* Final "* 2" required by Tegra hardware */
-	i2sclock = srate * params_channels(params) * sample_size * 2;
+	i2sclock = srate * channels * sample_size * 2;
 
 	bitcnt = (i2sclock / (2 * srate)) - 1;
 	if (bitcnt < 0 || bitcnt > TEGRA30_I2S_TIMING_CHANNEL_BIT_COUNT_MASK_US)
@@ -179,8 +184,8 @@  static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
 	regmap_write(i2s->regmap, TEGRA30_I2S_TIMING, val);
 
 	cif_conf.threshold = 0;
-	cif_conf.audio_channels = 2;
-	cif_conf.client_channels = 2;
+	cif_conf.audio_channels = channels;
+	cif_conf.client_channels = channels;
 	cif_conf.audio_bits = audio_bits;
 	cif_conf.client_bits = audio_bits;
 	cif_conf.expand = 0;
@@ -315,7 +320,7 @@  static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 8,
 		.rates = SNDRV_PCM_RATE_8000_96000,
 		.formats = SNDRV_PCM_FMTBIT_S32_LE |
 			   SNDRV_PCM_FMTBIT_S24_LE |
@@ -324,7 +329,7 @@  static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 2,
-		.channels_max = 2,
+		.channels_max = 8,
 		.rates = SNDRV_PCM_RATE_8000_96000,
 		.formats = SNDRV_PCM_FMTBIT_S32_LE |
 			   SNDRV_PCM_FMTBIT_S24_LE |