diff mbox series

[3/3] chtrt5645: Add ASUSTeKCOMPUTERINC.-T101HA-1.0.conf symlink to chtrt5645-dmic1.conf

Message ID 20200608202142.92894-3-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show
Series [1/3] bytcr-rt5640: Fix DMIC1 not working when connected over AIF2 | expand

Commit Message

Hans de Goede June 8, 2020, 8:21 p.m. UTC
The Asus T101HA uses a digital mic connected to the dmic1 pin, rather then
the default analog mic on in2 (just like the Asus T100HA).

Add a long name symlink to chtrt5645-dmic1.conf for this, so that
the right config is used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf | 1 +
 1 file changed, 1 insertion(+)
 create mode 120000 ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf

Comments

Jaroslav Kysela June 9, 2020, 8:50 a.m. UTC | #1
Dne 08. 06. 20 v 22:21 Hans de Goede napsal(a):
> The Asus T101HA uses a digital mic connected to the dmic1 pin, rather then
> the default analog mic on in2 (just like the Asus T100HA).
> 
> Add a long name symlink to chtrt5645-dmic1.conf for this, so that
> the right config is used.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>   ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf | 1 +
>   1 file changed, 1 insertion(+)
>   create mode 120000 ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf
> 
> diff --git a/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf b/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf
> new file mode 120000
> index 0000000..b4d2816
> --- /dev/null
> +++ b/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf
> @@ -0,0 +1 @@
> +chtrt5645-dmic1.conf
> \ No newline at end of file
> 

Applied to the alsa-ucm-conf repo. Thank you.

						Jaroslav
diff mbox series

Patch

diff --git a/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf b/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf
new file mode 120000
index 0000000..b4d2816
--- /dev/null
+++ b/ucm2/chtrt5645/ASUSTeKCOMPUTERINC.-T101HA-1.0.conf
@@ -0,0 +1 @@ 
+chtrt5645-dmic1.conf
\ No newline at end of file