diff mbox series

[2/2] ASoC: fsl_asrc: always use internal ratio

Message ID 20200716145201.186270-3-arnaud.ferraris@collabora.com (mailing list archive)
State New, archived
Headers show
Series ASoC: fsl_asrc: improve clock selection and quality | expand

Commit Message

Arnaud Ferraris July 16, 2020, 2:52 p.m. UTC 
Even though the current driver calculates the dividers to be used
depending on the clocks and sample rates, enabling the internal ratio
can lead to noticeable improvements in the audio quality, based on my
testing.

As stated in the documentation, "When USRx=1 and IDRx=0, ASRC internal
measured ratio will be used", so setting this bit even when not in
"Ideal Ratio" mode still makes sense.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
---
 sound/soc/fsl/fsl_asrc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index bfd35b9c0781..cc0f70c9140f 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -465,7 +465,7 @@  static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ATSi_MASK(index), ASRCTR_ATS(index));
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
-			   ASRCTR_USRi_MASK(index), 0);
+			   ASRCTR_USRi_MASK(index), ASRCTR_USR(index));
 
 	/* Set the input and output clock sources */
 	regmap_update_bits(asrc->regmap, REG_ASRCSR,
@@ -507,8 +507,7 @@  static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 
 	/* Enable Ideal Ratio mode */
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
-			   ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
-			   ASRCTR_IDR(index) | ASRCTR_USR(index));
+			   ASRCTR_IDRi_MASK(index), ASRCTR_IDR(index);
 
 	fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);