diff mbox series

[v2] dt-bindings: sound: convert ROHM BD28623 amplifier binding to yaml

Message ID 20200722174215.988974-1-katsuhiro@katsuster.net (mailing list archive)
State Accepted
Commit 7349885d87c66cfd5bd99332283d92ff509f15ff
Headers show
Series [v2] dt-bindings: sound: convert ROHM BD28623 amplifier binding to yaml | expand

Commit Message

Katsuhiro Suzuki July 22, 2020, 5:42 p.m. UTC 
This patch converts ROHM BD28623UMV class D speaker amplifier binding
to DT schema.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes in v2:
  - add additionalProperties:false
  - add Rob's Reviewed-by
---
 .../bindings/sound/rohm,bd28623.txt           | 29 --------
 .../bindings/sound/rohm,bd28623.yaml          | 67 +++++++++++++++++++
 2 files changed, 67 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt
 create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.yaml

Comments

Mark Brown July 23, 2020, 8:20 p.m. UTC | #1 
On Thu, 23 Jul 2020 02:42:15 +0900, Katsuhiro Suzuki wrote:
> This patch converts ROHM BD28623UMV class D speaker amplifier binding
> to DT schema.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: convert ROHM BD28623 amplifier binding to yaml
      commit: 7349885d87c66cfd5bd99332283d92ff509f15ff

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
deleted file mode 100644
index d84557c2686e..000000000000
--- a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt
+++ /dev/null
@@ -1,29 +0,0 @@ 
-ROHM BD28623MUV Class D speaker amplifier for digital input
-
-This codec does not have any control buses such as I2C, it detect format and
-rate of I2S signal automatically. It has two signals that can be connected
-to GPIOs: reset and mute.
-
-Required properties:
-- compatible      : should be "rohm,bd28623"
-- #sound-dai-cells: should be 0.
-- VCCA-supply     : regulator phandle for the VCCA supply
-- VCCP1-supply    : regulator phandle for the VCCP1 supply
-- VCCP2-supply    : regulator phandle for the VCCP2 supply
-
-Optional properties:
-- reset-gpios     : GPIO specifier for the active low reset line
-- mute-gpios      : GPIO specifier for the active low mute line
-
-Example:
-
-	codec {
-		compatible = "rohm,bd28623";
-		#sound-dai-cells = <0>;
-
-		VCCA-supply = <&vcc_reg>;
-		VCCP1-supply = <&vcc_reg>;
-		VCCP2-supply = <&vcc_reg>;
-		reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
new file mode 100644
index 000000000000..859ce64da152
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
@@ -0,0 +1,67 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rohm,bd28623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD28623MUV Class D speaker amplifier for digital input
+
+description:
+  This codec does not have any control buses such as I2C, it detect
+  format and rate of I2S signal automatically. It has two signals
+  that can be connected to GPIOs reset and mute.
+
+maintainers:
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+properties:
+  compatible:
+    const: rohm,bd28623
+
+  "#sound-dai-cells":
+    const: 0
+
+  VCCA-supply:
+    description:
+      regulator phandle for the VCCA (for analog) power supply
+
+  VCCP1-supply:
+    description:
+      regulator phandle for the VCCP1 (for ch1) power supply
+
+  VCCP2-supply:
+    description:
+      regulator phandle for the VCCP2 (for ch2) power supply
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low reset line
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low mute line
+
+required:
+  - compatible
+  - VCCA-supply
+  - VCCP1-supply
+  - VCCP2-supply
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    codec {
+      compatible = "rohm,bd28623";
+      #sound-dai-cells = <0>;
+
+      VCCA-supply = <&vcc_reg>;
+      VCCP1-supply = <&vcc_reg>;
+      VCCP2-supply = <&vcc_reg>;
+      reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+      mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+    };