@@ -37,6 +37,13 @@ struct adcx140_priv {
unsigned int slot_width;
};
+static const char * const gpo_config_names[] = {
+ "ti,gpo-config-1",
+ "ti,gpo-config-2",
+ "ti,gpo-config-3",
+ "ti,gpo-config-4",
+};
+
static const struct reg_default adcx140_reg_defaults[] = {
{ ADCX140_PAGE_SELECT, 0x00 },
{ ADCX140_SW_RESET, 0x00 },
@@ -60,10 +67,10 @@ static const struct reg_default adcx140_reg_defaults[] = {
{ ADCX140_PDMCLK_CFG, 0x40 },
{ ADCX140_PDM_CFG, 0x00 },
{ ADCX140_GPIO_CFG0, 0x22 },
+ { ADCX140_GPO_CFG0, 0x00 },
{ ADCX140_GPO_CFG1, 0x00 },
{ ADCX140_GPO_CFG2, 0x00 },
{ ADCX140_GPO_CFG3, 0x00 },
- { ADCX140_GPO_CFG4, 0x00 },
{ ADCX140_GPO_VAL, 0x00 },
{ ADCX140_GPIO_MON, 0x00 },
{ ADCX140_GPI_CFG0, 0x00 },
@@ -756,6 +763,43 @@ static const struct snd_soc_dai_ops adcx140_dai_ops = {
.set_tdm_slot = adcx140_set_dai_tdm_slot,
};
+static int adcx140_configure_gpo(struct adcx140_priv *adcx140)
+{
+ u32 gpo_outputs[ADCX140_NUM_GPOS];
+ u32 gpo_output_val = 0;
+ int ret;
+ int i;
+
+ for (i = 0; i < ADCX140_NUM_GPOS; i++) {
+ ret = device_property_read_u32_array(adcx140->dev,
+ gpo_config_names[i],
+ gpo_outputs,
+ ADCX140_NUM_GPO_CFGS);
+ if (ret)
+ continue;
+
+ if (gpo_outputs[0] > ADCX140_GPO_CFG_MAX) {
+ dev_err(adcx140->dev, "GPO%d config out of range\n", i + 1);
+ return -EINVAL;
+ }
+
+ if (gpo_outputs[1] > ADCX140_GPO_DRV_MAX) {
+ dev_err(adcx140->dev, "GPO%d drive out of range\n", i + 1);
+ return -EINVAL;
+ }
+
+ gpo_output_val = gpo_outputs[0] << ADCX140_GPO_SHIFT |
+ gpo_outputs[1];
+ ret = regmap_write(adcx140->regmap, ADCX140_GPO_CFG1 + i,
+ gpo_output_val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+
+}
+
static int adcx140_codec_probe(struct snd_soc_component *component)
{
struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
@@ -837,6 +881,10 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
return ret;
}
+ ret = adcx140_configure_gpo(adcx140);
+ if (ret)
+ goto out;
+
ret = adcx140_reset(adcx140);
if (ret)
goto out;
@@ -36,10 +36,10 @@
#define ADCX140_PDMCLK_CFG 0x1f
#define ADCX140_PDM_CFG 0x20
#define ADCX140_GPIO_CFG0 0x21
-#define ADCX140_GPO_CFG1 0x22
-#define ADCX140_GPO_CFG2 0x23
-#define ADCX140_GPO_CFG3 0x24
-#define ADCX140_GPO_CFG4 0x25
+#define ADCX140_GPO_CFG0 0x22
+#define ADCX140_GPO_CFG1 0x23
+#define ADCX140_GPO_CFG2 0x24
+#define ADCX140_GPO_CFG3 0x25
#define ADCX140_GPO_VAL 0x29
#define ADCX140_GPIO_MON 0x2a
#define ADCX140_GPI_CFG0 0x2b
@@ -139,4 +139,10 @@
#define ADCX140_GPI3_INDEX 2
#define ADCX140_GPI4_INDEX 3
+#define ADCX140_NUM_GPOS 4
+#define ADCX140_NUM_GPO_CFGS 2
+#define ADCX140_GPO_SHIFT 4
+#define ADCX140_GPO_CFG_MAX 4
+#define ADCX140_GPO_DRV_MAX 5
+
#endif /* _TLV320ADCX140_ */
Add General Purpose Output (GPO) configuration and driver output configuration. The GPOs can be configured as a GPO, IRQ, SDOUT or a PDMCLK output. In addition the output drive can be configured with various configurations. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tlv320adcx140.c | 50 +++++++++++++++++++++++++++++++- sound/soc/codecs/tlv320adcx140.h | 14 ++++++--- 2 files changed, 59 insertions(+), 5 deletions(-)