@@ -70,7 +70,7 @@ EXPORT_SYMBOL_GPL(axg_tdm_formatter_set_channel_masks);
static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter)
{
struct axg_tdm_stream *ts = formatter->stream;
- bool invert = formatter->drv->quirks->invert_sclk;
+ bool invert;
int ret;
/* Do nothing if the formatter is already enabled */
@@ -96,11 +96,12 @@ static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter)
return ret;
/*
- * If sclk is inverted, invert it back and provide the inversion
- * required by the formatter
+ * If sclk is inverted, it means the bit should latched on the
+ * rising edge which is what our HW expects. If not, we need to
+ * invert it before the formatter.
*/
- invert ^= axg_tdm_sclk_invert(ts->iface->fmt);
- ret = clk_set_phase(formatter->sclk, invert ? 180 : 0);
+ invert = axg_tdm_sclk_invert(ts->iface->fmt);
+ ret = clk_set_phase(formatter->sclk, invert ? 0 : 180);
if (ret)
return ret;
@@ -16,7 +16,6 @@ struct snd_kcontrol;
struct axg_tdm_formatter_hw {
unsigned int skew_offset;
- bool invert_sclk;
};
struct axg_tdm_formatter_ops {
@@ -228,7 +228,6 @@ static const struct axg_tdm_formatter_driver axg_tdmin_drv = {
.regmap_cfg = &axg_tdmin_regmap_cfg,
.ops = &axg_tdmin_ops,
.quirks = &(const struct axg_tdm_formatter_hw) {
- .invert_sclk = false,
.skew_offset = 2,
},
};
@@ -238,7 +237,6 @@ static const struct axg_tdm_formatter_driver g12a_tdmin_drv = {
.regmap_cfg = &axg_tdmin_regmap_cfg,
.ops = &axg_tdmin_ops,
.quirks = &(const struct axg_tdm_formatter_hw) {
- .invert_sclk = false,
.skew_offset = 3,
},
};
@@ -238,7 +238,6 @@ static const struct axg_tdm_formatter_driver axg_tdmout_drv = {
.regmap_cfg = &axg_tdmout_regmap_cfg,
.ops = &axg_tdmout_ops,
.quirks = &(const struct axg_tdm_formatter_hw) {
- .invert_sclk = true,
.skew_offset = 1,
},
};
@@ -248,7 +247,6 @@ static const struct axg_tdm_formatter_driver g12a_tdmout_drv = {
.regmap_cfg = &axg_tdmout_regmap_cfg,
.ops = &axg_tdmout_ops,
.quirks = &(const struct axg_tdm_formatter_hw) {
- .invert_sclk = true,
.skew_offset = 2,
},
};
@@ -309,7 +307,6 @@ static const struct axg_tdm_formatter_driver sm1_tdmout_drv = {
.regmap_cfg = &axg_tdmout_regmap_cfg,
.ops = &axg_tdmout_ops,
.quirks = &(const struct axg_tdm_formatter_hw) {
- .invert_sclk = true,
.skew_offset = 2,
},
};
After carefully checking, it appears that both tdmout and tdmin require the rising edge of the sclk they get to be synchronized with the frame sync event (which should be a rising edge of lrclk). TDMIN was improperly set before this patch. Remove the sclk_invert quirk which is no longer needed and fix the sclk phase. Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- sound/soc/meson/axg-tdm-formatter.c | 11 ++++++----- sound/soc/meson/axg-tdm-formatter.h | 1 - sound/soc/meson/axg-tdmin.c | 2 -- sound/soc/meson/axg-tdmout.c | 3 --- 4 files changed, 6 insertions(+), 11 deletions(-)