diff mbox series

[1/2] dt-bindings: tas2562: Remove tas2562 text file

Message ID 20200817172151.26564-1-dmurphy@ti.com (mailing list archive)
State Accepted
Commit b1e78c9fcca83d3666bc149ba8ecc1e472759359
Headers show
Series [1/2] dt-bindings: tas2562: Remove tas2562 text file | expand

Commit Message

Dan Murphy Aug. 17, 2020, 5:21 p.m. UTC
Remove the tas2562 text file as the tas2562.yaml is now available.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
 .../devicetree/bindings/sound/tas2562.txt     | 37 -------------------
 1 file changed, 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt


Mark Brown Aug. 18, 2020, 4:53 p.m. UTC | #1
On Mon, 17 Aug 2020 12:21:50 -0500, Dan Murphy wrote:
> Remove the tas2562 text file as the tas2562.yaml is now available.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next


[1/2] dt-bindings: tas2562: Remove tas2562 text file
      commit: b1e78c9fcca83d3666bc149ba8ecc1e472759359
[2/2] dt-bindings: tas2562: Add device specification links
      commit: da9afe50ae2aac72d1b213d028d4e865c7ea9ba3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

diff mbox series


diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
deleted file mode 100644
index dc6d7362ded7..000000000000
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ /dev/null
@@ -1,37 +0,0 @@ 
-Texas Instruments TAS2562 Smart PA
-The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-Required properties:
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
- - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- - ti,imon-slot-no:- TDM TX current sense time slot.
- - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
-		     greater then ti,imon-slot-no.
-Optional properties:
-- interrupt-parent: phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down-gpio: GPIO used to control the state of the device.
-tas2562@4c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        compatible = "ti,tas2562";
-        reg = <0x4c>;
-        interrupt-parent = <&gpio1>;
-        interrupts = <14>;
-	shut-down-gpio = <&gpio1 15 0>;
-        ti,imon-slot-no = <0>;
-        ti,vmon-slot-no = <1>;