| Message ID | 20210104230253.2805217-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: Add missing array size constraints | expand |
On Tue, Jan 5, 2021 at 12:03 AM Rob Herring <robh@kernel.org> wrote: > DT properties which can have multiple entries need to specify what the > entries are and define how many entries there can be. In the case of > only a single entry, just 'maxItems: 1' is sufficient. > > Add the missing entry constraints. These were found with a modified > meta-schema. Unfortunately, there are a few cases where the size > constraints are not defined such as common bindings, so the meta-schema > can't be part of the normal checks. > > Cc: Jens Axboe <axboe@kernel.dk> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Marc Zyngier <maz@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Ohad Ben-Cohen <ohad@wizery.com> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Rob Herring <robh@kernel.org> This is good. The stricter the better. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml index 2e765bb3e6f6..7ca5375f278f 100644 --- a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml +++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml @@ -30,8 +30,8 @@ properties: Interrupts can be used to notify the completion of cache operations. The number of interrupts should match to the number of CPU cores. The specified interrupts correspond to CPU0, CPU1, ... in this order. - minItems: 1 - maxItems: 4 + minItems: 1 + maxItems: 4 cache-unified: true diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml index 5e2a2394e600..ce75d77e9289 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -61,6 +61,7 @@ properties: maxItems: 8 calxeda,sgpio-gpio: + maxItems: 3 description: | phandle-gpio bank, bit offset, and default on or off, which indicates that the driver supports SGPIO indicator lights using the indicated diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml index 565ca468cb44..7f5cf4001f76 100644 --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -22,6 +22,7 @@ properties: const: canaan,k210-clk clocks: + maxItems: 1 description: Phandle of the SoC 26MHz fixed-rate oscillator clock. diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 7ce06f9f9f8e..767edc0a7978 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -60,6 +60,7 @@ properties: Phandle of the I2C controller used for DDC EDID probing hpd-gpios: + maxItems: 1 description: > The GPIO pin for the HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself) diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index f54b4e4808f0..031e35e76db2 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -37,6 +37,7 @@ properties: Phandle of the I2C controller used for DDC EDID probing hpd-gpios: + maxItems: 1 description: > The GPIO pin for the HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself) diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index b8b9435e464c..4f92365e888a 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -30,6 +30,7 @@ properties: power supply for LCM (1.8V) dcdc-en-gpios: + maxItems: 1 description: | phandle of the gpio for power ic line Power IC supply enable, High active diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml index 51f423297ec8..aa5a0dc391a4 100644 --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -37,7 +37,8 @@ properties: reset-gpios: true - 'mantix,tp-rstn-gpios': + mantix,tp-rstn-gpios: + maxItems: 1 description: second reset line that triggers DSI config load backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index 2f5df1d235ae..ef4c0a24512d 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -30,6 +30,7 @@ properties: panel. The novatek,nt36672a compatible shall always be provided as a fallback. reset-gpios: + maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names (active high) diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index 4cc011230153..7afc9f2be13a 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -21,7 +21,7 @@ properties: - fsl,imx8mp-dsp reg: - description: Should contain register location and length + maxItems: 1 clocks: items: diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 121a601db22e..6a2dc8b3ed14 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -39,8 +39,7 @@ properties: - const: atmel,at25 reg: - description: - Chip select number. + maxItems: 1 spi-max-frequency: true diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index 4b0f414486d2..d5cfa32ea52d 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -19,6 +19,7 @@ properties: const: nxp,ptn5150 int-gpios: + maxItems: 1 deprecated: true description: GPIO pin (input) connected to the PTN5150's INTB pin. @@ -31,6 +32,7 @@ properties: maxItems: 1 vbus-gpios: + maxItems: 1 description: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index f5ee23c2df60..57cdcfd4ff3c 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -81,6 +81,7 @@ properties: const: 2 reset-gpios: + maxItems: 1 description: GPIO specification for the RESET input. This is an active low signal to the PCA953x. Not valid for Maxim MAX732x devices. diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index 924477dfb833..a85a28145ef6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -40,6 +40,7 @@ properties: ADC reference voltage supply adi,sync-in-gpios: + maxItems: 1 description: Enables synchronization of multiple devices that require simultaneous sampling. A pulse is always required if the configuration is changed @@ -76,6 +77,7 @@ patternProperties: properties: reg: + maxItems: 1 description: | The channel number. diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml index 7f534a933e92..a726b6c2ab65 100644 --- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml @@ -23,6 +23,7 @@ properties: maxItems: 1 clocks: + maxItems: 1 description: Input clock used to derive the sample clock. Expected to be the SoC's APB clock. diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 2716d4e95329..0bd2fc0356c8 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -20,7 +20,7 @@ properties: description: Power supply for the reference voltage reg: - description: spi chipselect number according to the usual spi bindings + maxItems: 1 spi-max-frequency: description: maximal spi bus frequency supported diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 95cc705b961b..74a4a9d95798 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -68,6 +68,7 @@ patternProperties: properties: reg: + maxItems: 1 description: | ADC channel number. See include/dt-bindings/iio/qcom,spmi-vadc.h diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 28417b31b558..6364ede9bb5f 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -41,6 +41,8 @@ properties: maxItems: 2 clocks: + minItems: 1 + maxItems: 2 description: | Core can use up to two clocks, depending on part used: - "adc" clock: for the analog circuitry, common to all ADCs. diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index a25590a16ba7..a0a1ffe017df 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -47,6 +47,7 @@ properties: description: an optional 3x3 mounting rotation matrix. reset-gpios: + maxItems: 1 description: | an optional pin needed for AK09911 to set the reset state. This should be usually active low diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml index 1aee9f9be951..0ebb6725a1af 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml @@ -25,6 +25,7 @@ properties: maxItems: 1 reset-gpios: + maxItems: 1 description: Active low signal to the AD5272 RESET input. diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml index a792d6377b1d..a9b53c2e6f0a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml @@ -29,6 +29,7 @@ properties: description: touchscreen can be used as a wakeup source. reset-gpios: + maxItems: 1 description: reset gpio the chip is connected to. vcc33-supply: diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml index 43c6effbb5bd..1d6e0f64a807 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml @@ -31,7 +31,7 @@ properties: The 1st cell is hw interrupt number, the 2nd cell is channel index. clocks: - description: ipg clock. + maxItems: 1 clock-names: const: ipg diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml index 2a5b29567926..6d3e68eb2e8b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml @@ -36,6 +36,8 @@ properties: Reference to a phandle of a hardware spinlock provider node. interrupts: + minItems: 1 + maxItems: 96 description: Interrupts references to primary interrupt controller diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml index 2f7058f7760c..c34303b87a5b 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml @@ -53,6 +53,7 @@ properties: maxItems: 1 memory-region: + maxItems: 1 description: CMA pool to use for buffers allocation instead of the default CMA pool. diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml index dfc4d29a4f04..184d33bd3828 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -40,6 +40,7 @@ properties: Digital core voltage supply, 1.2 volts reset-gpios: + maxItems: 1 description: |- Reference to the GPIO connected to the xclr pin, if any. Must be released (set high) after all supplies are applied. diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index 637e24f0f73b..c6e44f47ce7c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -28,6 +28,8 @@ properties: const: 1 ranges: + minItems: 1 + maxItems: 4 description: | Reflects the memory layout with four integer values per bank. Format: <bank-number> 0 <parent address of bank> <size> diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml index 271a3eafc054..8cc951feb7df 100644 --- a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml +++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml @@ -15,6 +15,7 @@ properties: const: "fsl,dpaa2-console" reg: + maxItems: 1 description: A standard property. Specifies the region where the MCFBA (MC firmware base address) register can be found. diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 186f04ba9357..df4ee4c778ae 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -40,6 +40,7 @@ properties: There is no card detection available; polling must be used. cd-gpios: + maxItems: 1 description: The card detection will be done using the GPIO provided. @@ -104,6 +105,7 @@ properties: line. Not used in combination with eMMC or SDIO. wp-gpios: + maxItems: 1 description: GPIO to use for the write-protect detection. diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index c47b58f3e3f6..097c5cc6c853 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -66,6 +66,7 @@ properties: dma-coherent: true clocks: + maxItems: 1 description: CPSW2G NUSS functional clock clock-names: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 9b7117920d90..2a42a27fb911 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -59,6 +59,7 @@ properties: - const: cpts clocks: + maxItems: 1 description: CPTS reference clock clock-names: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml index 94ac23687b7e..77606c899fe2 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -51,9 +51,11 @@ properties: - const: usb2_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml index fd6e126fcf18..078af52b16ed 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml @@ -50,9 +50,11 @@ properties: - const: usb1_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml index 7670411002c9..e632140722a2 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml @@ -50,9 +50,11 @@ properties: - const: usb3_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml index 9b319381d1ad..5bad9b06e2e7 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml @@ -45,9 +45,11 @@ properties: - const: usb1_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml index b0ed01bbf3db..922b4665e00d 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml @@ -54,9 +54,11 @@ properties: - const: usb2_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml index b0674406f8aa..a94019efc2f3 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml @@ -50,9 +50,11 @@ properties: - const: usb1_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml index 48dc9c834a9b..33f3ddc0492d 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml @@ -56,9 +56,11 @@ properties: - const: usb2_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml index 60c344585276..f80431060803 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -62,9 +62,11 @@ properties: - const: usb3_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml index a2bb36790fbd..d947e50a49d2 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml @@ -56,9 +56,11 @@ properties: - const: usb2_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml index eadfd0c9493c..a2836c296cc4 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml @@ -42,9 +42,11 @@ properties: const: usb0_reset usb0_id_det-gpios: + maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: + maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml index ded7d6f0a119..2eb493fa64fd 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml @@ -22,7 +22,8 @@ properties: clocks: anyOf: - - description: Main PHY Clock + - maxItems: 1 + description: Main PHY Clock - items: - description: Main PHY clock @@ -39,20 +40,16 @@ properties: - const: hsic_480M resets: - anyOf: + minItems: 1 + items: - description: Normal USB PHY reset - - - items: - - description: Normal USB PHY reset - - description: HSIC Reset + - description: HSIC Reset reset-names: - oneOf: + minItems: 1 + items: - const: phy - - - items: - - const: phy - - const: hsic + - const: hsic phy_type: const: hsic diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml index 34756347a14e..745c525ce6b9 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -20,7 +20,7 @@ properties: - socionext,uniphier-pxs3-ahci-phy reg: - description: PHY register region (offset and length) + maxItems: 1 "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml index a06831fd64b9..3e0566899041 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -21,7 +21,7 @@ properties: - socionext,uniphier-pxs3-pcie-phy reg: - description: PHY register region (offset and length) + maxItems: 1 "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml index 6fa5caab1487..a681cbc3b4ef 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -24,7 +24,7 @@ properties: - socionext,uniphier-pxs3-usb3-hsphy reg: - description: PHY register region (offset and length) + maxItems: 1 "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml index 9d46715ed036..41c0dd68ee25 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -25,7 +25,7 @@ properties: - socionext,uniphier-pxs3-usb3-ssphy reg: - description: PHY register region (offset and length) + maxItems: 1 "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml index bcec422d7734..ff8a6d9eb153 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml @@ -55,7 +55,7 @@ properties: - ti,am654-phy-gmii-sel reg: - description: Address and length of the register set for the device + maxItems: 1 '#phy-cells': true diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 54631dc1adb0..91be5720d094 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -23,8 +23,7 @@ properties: compatible: const: aspeed,ast2400-pinctrl reg: - description: | - A hint for the memory regions associated with the pin-controller + maxItems: 2 patternProperties: '^.*$': diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index a90c0fe0495f..40e9e8d4be5a 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -24,8 +24,8 @@ properties: compatible: const: aspeed,ast2500-pinctrl reg: - description: | - A hint for the memory regions associated with the pin-controller + maxItems: 2 + aspeed,external-nodes: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml index f6b3dd4093ca..06eca6667f67 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml @@ -70,6 +70,7 @@ properties: description: Enables bypass mode at boot time interrupts: + maxItems: 1 description: | Indicates that the device state has changed. diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml index c019f9fbe916..d0aa91bbf5e5 100644 --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml @@ -44,7 +44,7 @@ properties: - const: vpu interrupts: - description: VPU hardware interrupt + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml index 084960a8f17a..1a1159097a2a 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml @@ -70,10 +70,13 @@ properties: the firmware image. clocks: + maxItems: 1 description: | Main functional clock for the remote processor resets: + minItems: 1 + maxItems: 2 description: | Reset handles for the remote processor diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml index efc0198eeb74..2ece8630dc68 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml @@ -63,6 +63,7 @@ properties: next-level-cache: true memory-region: + maxItems: 1 description: | The reference to the reserved-memory for the L2 Loosely Integrated Memory region. The reserved memory node should be defined as per the bindings in reserved-memory.txt. diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index c139c5edb93e..69533347aa57 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -81,6 +81,8 @@ properties: maxItems: 1 dmas: + minItems: 2 + maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 672158906c33..22d76829f7ae 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -120,6 +120,8 @@ properties: maxItems: 1 dmas: + minItems: 2 + maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml index dbffb9534835..3c67d3202e1b 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -55,6 +55,8 @@ properties: maxItems: 1 dmas: + minItems: 2 + maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml index 147f8a37e02a..d5571c7a4424 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -55,6 +55,8 @@ properties: maxItems: 1 dmas: + minItems: 2 + maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index dd47fef9854d..559aff13ae23 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -88,6 +88,7 @@ properties: description: Phandle to the codec analog controls in the PRCM allwinner,pa-gpios: + maxItems: 1 description: GPIO to enable the external amplifier required: diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 5095b780e2c7..837e3faa63a9 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -55,6 +55,7 @@ patternProperties: maxItems: 1 reg: + maxItems: 1 description: dai link address. cpu: diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml index 1c6947294825..5fff586dc802 100644 --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml @@ -62,12 +62,15 @@ properties: description: Supply for the micbias on the headset mic earpath-sel-gpios: + maxItems: 1 description: GPIO for switching between tv-out and mic paths headset-detect-gpios: + maxItems: 1 description: GPIO for detection of headset insertion headset-key-gpios: + maxItems: 1 description: GPIO for detection of headset key press io-channels: diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml index 578928e67e5c..095775c598fa 100644 --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml @@ -53,9 +53,11 @@ properties: description: Supply for the micbias on the Sub microphone fm-sel-gpios: + maxItems: 1 description: GPIO pin for FM selection lineout-sel-gpios: + maxItems: 1 description: GPIO pin for line out selection required: diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 27f7132ba2ef..acd4bbe69731 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -36,10 +36,12 @@ properties: I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f shut-down-gpios: + maxItems: 1 description: GPIO used to control the state of the device. deprecated: true shutdown-gpios: + maxItems: 1 description: GPIO used to control the state of the device. interrupts: diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 07e7f9951d2e..027bebf4e8cf 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -27,9 +27,11 @@ properties: I2C address of the device can be between 0x41 to 0x48. reset-gpio: + maxItems: 1 description: GPIO used to reset the device. shutdown-gpios: + maxItems: 1 description: GPIO used to control the state of the device. interrupts: diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index df18be9d7b15..54d64785aad2 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -35,6 +35,7 @@ properties: I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f reset-gpios: + maxItems: 1 description: | GPIO used for hardware reset. diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml index 10e83cb17e8d..8397f60d80a2 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -68,6 +68,8 @@ properties: maxItems: 1 dmas: + minItems: 2 + maxItems: 4 description: Must contain a list of pairs of references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml index 19d116ff9ddc..2a62bb204bbe 100644 --- a/Documentation/devicetree/bindings/sram/sram.yaml +++ b/Documentation/devicetree/bindings/sram/sram.yaml @@ -35,6 +35,7 @@ properties: maxItems: 1 clocks: + maxItems: 1 description: A list of phandle and clock specifier pair that controls the single SRAM clock. @@ -46,6 +47,7 @@ properties: const: 1 ranges: + maxItems: 1 description: Should translate from local addresses within the sram to bus addresses. diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml index d918cee100ac..1c7cf32e7ac2 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml @@ -22,6 +22,8 @@ properties: maxItems: 1 interrupts: + minItems: 2 + maxItems: 6 description: List of timers interrupts diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index 1a721d8af67a..a8de99b0c0f9 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -18,7 +18,7 @@ properties: - const: intel,ixp4xx-timer reg: - description: Should contain registers location and length + maxItems: 1 interrupts: minItems: 1 diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index d9207bf9d894..0f520f17735e 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -39,7 +39,7 @@ properties: maxItems: 1 phys: - description: PHY specifier for the OTG PHY + maxItems: 1 phy-names: const: usb diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml index ffa148b9eaa8..d4618d15ecc1 100644 --- a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml @@ -22,6 +22,8 @@ properties: description: Interrupt for signals mirrored to out-gpios. in-gpios: + minItems: 1 + maxItems: 2 description: Array of one or two GPIO pins used for input signals. brcm,in-functions: @@ -33,6 +35,7 @@ properties: description: Array of enable and mask pairs, one per gpio in-gpios. out-gpios: + maxItems: 1 description: Array of one GPIO pin used for output signals. brcm,out-functions: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 247ef00381ea..f76b25f7fc7a 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -83,6 +83,7 @@ properties: Phandle of a companion. phys: + maxItems: 1 description: PHY specifier for the USB PHY phy-names: diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index 2178bcc401bc..8e2bd61f2075 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -71,6 +71,7 @@ properties: Overrides the detected port count phys: + maxItems: 1 description: PHY specifier for the USB PHY phy-names: diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index 678396eeeb78..f506225a4d57 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -40,7 +40,7 @@ properties: - const: mc phys: - description: PHY specifier for the USB PHY + maxItems: 1 usb-role-switch: type: boolean diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 54c361d4a7af..e67223d90bb7 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -68,6 +68,7 @@ properties: Integer to use BUSWAIT register. renesas,enable-gpio: + maxItems: 1 description: | gpio specifier to check GPIO determining if USB function should be enabled. diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 388245b91a55..adce36e48bc9 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -15,13 +15,14 @@ properties: - const: ti,j721e-usb reg: - description: module registers + maxItems: 1 power-domains: description: PM domain provider node and an args specifier containing the USB device id value. See, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + maxItems: 1 clocks: description: Clock phandles to usb2_refclk and lpm_clk diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml index c1b19fc5d0a2..91ef374faba8 100644 --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -43,12 +43,14 @@ properties: maxItems: 2 power-domains: + maxItems: 1 description: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id value. This property is as per the binding, Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt phys: + maxItems: 1 description: PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY to be turned on before the controller.
DT properties which can have multiple entries need to specify what the entries are and define how many entries there can be. In the case of only a single entry, just 'maxItems: 1' is sufficient. Add the missing entry constraints. These were found with a modified meta-schema. Unfortunately, there are a few cases where the size constraints are not defined such as common bindings, so the meta-schema can't be part of the normal checks. Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> --- Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ide@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-spi@vger.kernel.org Cc: linux-usb@vger.kernel.org --- .../socionext,uniphier-system-cache.yaml | 4 ++-- .../bindings/ata/sata_highbank.yaml | 1 + .../bindings/clock/canaan,k210-clk.yaml | 1 + .../bindings/display/brcm,bcm2711-hdmi.yaml | 1 + .../bindings/display/brcm,bcm2835-hdmi.yaml | 1 + .../display/panel/jdi,lt070me05000.yaml | 1 + .../display/panel/mantix,mlaf057we51-x.yaml | 3 ++- .../display/panel/novatek,nt36672a.yaml | 1 + .../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +- .../devicetree/bindings/eeprom/at25.yaml | 3 +-- .../bindings/extcon/extcon-ptn5150.yaml | 2 ++ .../bindings/gpio/gpio-pca95xx.yaml | 1 + .../bindings/iio/adc/adi,ad7768-1.yaml | 2 ++ .../bindings/iio/adc/aspeed,ast2400-adc.yaml | 1 + .../bindings/iio/adc/lltc,ltc2496.yaml | 2 +- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 1 + .../bindings/iio/adc/st,stm32-adc.yaml | 2 ++ .../iio/magnetometer/asahi-kasei,ak8975.yaml | 1 + .../iio/potentiometer/adi,ad5272.yaml | 1 + .../input/touchscreen/elan,elants_i2c.yaml | 1 + .../interrupt-controller/fsl,intmux.yaml | 2 +- .../interrupt-controller/st,stm32-exti.yaml | 2 ++ .../allwinner,sun4i-a10-video-engine.yaml | 1 + .../devicetree/bindings/media/i2c/imx219.yaml | 1 + .../memory-controllers/exynos-srom.yaml | 2 ++ .../bindings/misc/fsl,dpaa2-console.yaml | 1 + .../bindings/mmc/mmc-controller.yaml | 2 ++ .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 1 + .../bindings/net/ti,k3-am654-cpts.yaml | 1 + .../phy/allwinner,sun4i-a10-usb-phy.yaml | 2 ++ .../phy/allwinner,sun50i-a64-usb-phy.yaml | 2 ++ .../phy/allwinner,sun50i-h6-usb-phy.yaml | 2 ++ .../phy/allwinner,sun5i-a13-usb-phy.yaml | 2 ++ .../phy/allwinner,sun6i-a31-usb-phy.yaml | 2 ++ .../phy/allwinner,sun8i-a23-usb-phy.yaml | 2 ++ .../phy/allwinner,sun8i-a83t-usb-phy.yaml | 2 ++ .../phy/allwinner,sun8i-h3-usb-phy.yaml | 2 ++ .../phy/allwinner,sun8i-r40-usb-phy.yaml | 2 ++ .../phy/allwinner,sun8i-v3s-usb-phy.yaml | 2 ++ .../phy/allwinner,sun9i-a80-usb-phy.yaml | 19 ++++++++----------- .../phy/socionext,uniphier-ahci-phy.yaml | 2 +- .../phy/socionext,uniphier-pcie-phy.yaml | 2 +- .../phy/socionext,uniphier-usb3hs-phy.yaml | 2 +- .../phy/socionext,uniphier-usb3ss-phy.yaml | 2 +- .../bindings/phy/ti,phy-gmii-sel.yaml | 2 +- .../pinctrl/aspeed,ast2400-pinctrl.yaml | 3 +-- .../pinctrl/aspeed,ast2500-pinctrl.yaml | 4 ++-- .../bindings/power/supply/bq25980.yaml | 1 + .../bindings/remoteproc/ingenic,vpu.yaml | 2 +- .../remoteproc/ti,omap-remoteproc.yaml | 3 +++ .../bindings/riscv/sifive-l2-cache.yaml | 1 + .../bindings/serial/renesas,hscif.yaml | 2 ++ .../bindings/serial/renesas,scif.yaml | 2 ++ .../bindings/serial/renesas,scifa.yaml | 2 ++ .../bindings/serial/renesas,scifb.yaml | 2 ++ .../sound/allwinner,sun4i-a10-codec.yaml | 1 + .../bindings/sound/google,sc7180-trogdor.yaml | 1 + .../bindings/sound/samsung,aries-wm8994.yaml | 3 +++ .../bindings/sound/samsung,midas-audio.yaml | 2 ++ .../devicetree/bindings/sound/tas2562.yaml | 2 ++ .../devicetree/bindings/sound/tas2770.yaml | 2 ++ .../bindings/sound/tlv320adcx140.yaml | 1 + .../devicetree/bindings/spi/renesas,rspi.yaml | 2 ++ .../devicetree/bindings/sram/sram.yaml | 2 ++ .../timer/allwinner,sun4i-a10-timer.yaml | 2 ++ .../bindings/timer/intel,ixp4xx-timer.yaml | 2 +- .../usb/allwinner,sun4i-a10-musb.yaml | 2 +- .../bindings/usb/brcm,usb-pinmap.yaml | 3 +++ .../devicetree/bindings/usb/generic-ehci.yaml | 1 + .../devicetree/bindings/usb/generic-ohci.yaml | 1 + .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +- .../bindings/usb/renesas,usbhs.yaml | 1 + .../devicetree/bindings/usb/ti,j721e-usb.yaml | 3 ++- .../bindings/usb/ti,keystone-dwc3.yaml | 2 ++ 74 files changed, 118 insertions(+), 33 deletions(-)