From patchwork Tue Jan 5 14:02:49 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thomas Bogendoerfer X-Patchwork-Id: 11999077 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 657F8C433DB for ; Tue, 5 Jan 2021 14:07:21 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id AC11522AAE for ; Tue, 5 Jan 2021 14:07:20 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org AC11522AAE Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=alpha.franken.de Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=alsa-devel-bounces@alsa-project.org Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 48C5A16C7; Tue, 5 Jan 2021 15:06:29 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 48C5A16C7 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1609855639; bh=tVFXP8qslkImtsJgq2kz5zS75JqBnzWGnUtdDCSoyk0=; h=From:To:Subject:Date:In-Reply-To:References:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=rV5opWBi+Cq09Z4MGuGAFKnNxKRalNvAOsEmNOPR+YeeoVQKLURCf+i10EvlzQSea Sfqql6iXw6dS7+leDVi8Fo9lqsYEeUuM9ohUiM3NJ6W4XlqW92DoTg1Uz6vrvwJKVx Yse274Tme0HybChAM6JthXVfpJfSK8zDcMLksnm0= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id E5269F804E3; Tue, 5 Jan 2021 15:05:00 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 49DC3F802C4; Tue, 5 Jan 2021 15:04:01 +0100 (CET) Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id ED930F800FD for ; Tue, 5 Jan 2021 15:03:42 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz ED930F800FD X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.221.27]) by mx2.suse.de (Postfix) with ESMTP id 715C8AE63; Tue, 5 Jan 2021 14:03:42 +0000 (UTC) From: Thomas Bogendoerfer To: Matt Mackall , Herbert Xu , Dan Williams , Vinod Koul , "David S. Miller" , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Jakub Kicinski , Alessandro Zummo , Alexandre Belloni , Mark Brown , Wim Van Sebroeck , Guenter Roeck , Liam Girdwood , Jaroslav Kysela , Takashi Iwai , linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org, dmaengine@vger.kernel.org, linux-ide@vger.kernel.org, linux-mtd@lists.infradead.org, netdev@vger.kernel.org, linux-rtc@vger.kernel.org, linux-spi@vger.kernel.org, linux-watchdog@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH 04/10] spi: txx9: Remove driver Date: Tue, 5 Jan 2021 15:02:49 +0100 Message-Id: <20210105140305.141401-5-tsbogend@alpha.franken.de> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20210105140305.141401-1-tsbogend@alpha.franken.de> References: <20210105140305.141401-1-tsbogend@alpha.franken.de> MIME-Version: 1.0 X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" CPU support for TX49xx is getting removed, so remove support SPI driver for it. Signed-off-by: Thomas Bogendoerfer --- drivers/spi/Kconfig | 6 - drivers/spi/Makefile | 1 - drivers/spi/spi-txx9.c | 477 ----------------------------------------- 3 files changed, 484 deletions(-) delete mode 100644 drivers/spi/spi-txx9.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index aadaea052f51..7e9d91bbb996 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -885,12 +885,6 @@ config SPI_TOPCLIFF_PCH This driver also supports the ML7213/ML7223/ML7831, a companion chip for the Atom E6xx series and compatible with the Intel EG20T PCH. -config SPI_TXX9 - tristate "Toshiba TXx9 SPI controller" - depends on GPIOLIB && (CPU_TX49XX || COMPILE_TEST) - help - SPI driver for Toshiba TXx9 MIPS SoCs - config SPI_UNIPHIER tristate "Socionext UniPhier SPI Controller" depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 6fea5821662e..9578b40e7800 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -122,7 +122,6 @@ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o -obj-$(CONFIG_SPI_TXX9) += spi-txx9.o obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c deleted file mode 100644 index 3606232f190f..000000000000 --- a/drivers/spi/spi-txx9.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * TXx9 SPI controller driver. - * - * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - * - * Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define SPI_FIFO_SIZE 4 -#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */ -#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */ - -#define TXx9_SPMCR 0x00 -#define TXx9_SPCR0 0x04 -#define TXx9_SPCR1 0x08 -#define TXx9_SPFS 0x0c -#define TXx9_SPSR 0x14 -#define TXx9_SPDR 0x18 - -/* SPMCR : SPI Master Control */ -#define TXx9_SPMCR_OPMODE 0xc0 -#define TXx9_SPMCR_CONFIG 0x40 -#define TXx9_SPMCR_ACTIVE 0x80 -#define TXx9_SPMCR_SPSTP 0x02 -#define TXx9_SPMCR_BCLR 0x01 - -/* SPCR0 : SPI Control 0 */ -#define TXx9_SPCR0_TXIFL_MASK 0xc000 -#define TXx9_SPCR0_RXIFL_MASK 0x3000 -#define TXx9_SPCR0_SIDIE 0x0800 -#define TXx9_SPCR0_SOEIE 0x0400 -#define TXx9_SPCR0_RBSIE 0x0200 -#define TXx9_SPCR0_TBSIE 0x0100 -#define TXx9_SPCR0_IFSPSE 0x0010 -#define TXx9_SPCR0_SBOS 0x0004 -#define TXx9_SPCR0_SPHA 0x0002 -#define TXx9_SPCR0_SPOL 0x0001 - -/* SPSR : SPI Status */ -#define TXx9_SPSR_TBSI 0x8000 -#define TXx9_SPSR_RBSI 0x4000 -#define TXx9_SPSR_TBS_MASK 0x3800 -#define TXx9_SPSR_RBS_MASK 0x0700 -#define TXx9_SPSR_SPOE 0x0080 -#define TXx9_SPSR_IFSD 0x0008 -#define TXx9_SPSR_SIDLE 0x0004 -#define TXx9_SPSR_STRDY 0x0002 -#define TXx9_SPSR_SRRDY 0x0001 - - -struct txx9spi { - struct work_struct work; - spinlock_t lock; /* protect 'queue' */ - struct list_head queue; - wait_queue_head_t waitq; - void __iomem *membase; - int baseclk; - struct clk *clk; - struct gpio_desc *last_chipselect; - int last_chipselect_val; -}; - -static u32 txx9spi_rd(struct txx9spi *c, int reg) -{ - return __raw_readl(c->membase + reg); -} -static void txx9spi_wr(struct txx9spi *c, u32 val, int reg) -{ - __raw_writel(val, c->membase + reg); -} - -static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c, - int on, unsigned int cs_delay) -{ - /* - * The GPIO descriptor will track polarity inversion inside - * gpiolib. - */ - if (on) { - /* deselect the chip with cs_change hint in last transfer */ - if (c->last_chipselect) - gpiod_set_value(c->last_chipselect, - !c->last_chipselect_val); - c->last_chipselect = spi->cs_gpiod; - c->last_chipselect_val = on; - } else { - c->last_chipselect = NULL; - ndelay(cs_delay); /* CS Hold Time */ - } - gpiod_set_value(spi->cs_gpiod, on); - ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */ -} - -static int txx9spi_setup(struct spi_device *spi) -{ - struct txx9spi *c = spi_master_get_devdata(spi->master); - - if (!spi->max_speed_hz) - return -EINVAL; - - /* deselect chip */ - spin_lock(&c->lock); - txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz); - spin_unlock(&c->lock); - - return 0; -} - -static irqreturn_t txx9spi_interrupt(int irq, void *dev_id) -{ - struct txx9spi *c = dev_id; - - /* disable rx intr */ - txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE, - TXx9_SPCR0); - wake_up(&c->waitq); - return IRQ_HANDLED; -} - -static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) -{ - struct spi_device *spi = m->spi; - struct spi_transfer *t; - unsigned int cs_delay; - unsigned int cs_change = 1; - int status = 0; - u32 mcr; - u32 prev_speed_hz = 0; - u8 prev_bits_per_word = 0; - - /* CS setup/hold/recovery time in nsec */ - cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz; - - mcr = txx9spi_rd(c, TXx9_SPMCR); - if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) { - dev_err(&spi->dev, "Bad mode.\n"); - status = -EIO; - goto exit; - } - mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); - - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); - txx9spi_wr(c, TXx9_SPCR0_SBOS - | ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0) - | ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0) - | 0x08, - TXx9_SPCR0); - - list_for_each_entry(t, &m->transfers, transfer_list) { - const void *txbuf = t->tx_buf; - void *rxbuf = t->rx_buf; - u32 data; - unsigned int len = t->len; - unsigned int wsize; - u32 speed_hz = t->speed_hz; - u8 bits_per_word = t->bits_per_word; - - wsize = bits_per_word >> 3; /* in bytes */ - - if (prev_speed_hz != speed_hz - || prev_bits_per_word != bits_per_word) { - int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; - - n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, - TXx9_SPMCR); - txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1); - /* enter active mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR); - - prev_speed_hz = speed_hz; - prev_bits_per_word = bits_per_word; - } - - if (cs_change) - txx9spi_cs_func(spi, c, 1, cs_delay); - cs_change = t->cs_change; - while (len) { - unsigned int count = SPI_FIFO_SIZE; - int i; - u32 cr0; - - if (len < count * wsize) - count = len / wsize; - /* now tx must be idle... */ - while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE)) - cpu_relax(); - cr0 = txx9spi_rd(c, TXx9_SPCR0); - cr0 &= ~TXx9_SPCR0_RXIFL_MASK; - cr0 |= (count - 1) << 12; - /* enable rx intr */ - cr0 |= TXx9_SPCR0_RBSIE; - txx9spi_wr(c, cr0, TXx9_SPCR0); - /* send */ - for (i = 0; i < count; i++) { - if (txbuf) { - data = (wsize == 1) - ? *(const u8 *)txbuf - : *(const u16 *)txbuf; - txx9spi_wr(c, data, TXx9_SPDR); - txbuf += wsize; - } else - txx9spi_wr(c, 0, TXx9_SPDR); - } - /* wait all rx data */ - wait_event(c->waitq, - txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI); - /* receive */ - for (i = 0; i < count; i++) { - data = txx9spi_rd(c, TXx9_SPDR); - if (rxbuf) { - if (wsize == 1) - *(u8 *)rxbuf = data; - else - *(u16 *)rxbuf = data; - rxbuf += wsize; - } - } - len -= count * wsize; - } - m->actual_length += t->len; - spi_transfer_delay_exec(t); - - if (!cs_change) - continue; - if (t->transfer_list.next == &m->transfers) - break; - /* sometimes a short mid-message deselect of the chip - * may be needed to terminate a mode or command - */ - txx9spi_cs_func(spi, c, 0, cs_delay); - } - -exit: - m->status = status; - if (m->complete) - m->complete(m->context); - - /* normally deactivate chipselect ... unless no error and - * cs_change has hinted that the next message will probably - * be for this chip too. - */ - if (!(status == 0 && cs_change)) - txx9spi_cs_func(spi, c, 0, cs_delay); - - /* enter config mode */ - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); -} - -static void txx9spi_work(struct work_struct *work) -{ - struct txx9spi *c = container_of(work, struct txx9spi, work); - unsigned long flags; - - spin_lock_irqsave(&c->lock, flags); - while (!list_empty(&c->queue)) { - struct spi_message *m; - - m = container_of(c->queue.next, struct spi_message, queue); - list_del_init(&m->queue); - spin_unlock_irqrestore(&c->lock, flags); - - txx9spi_work_one(c, m); - - spin_lock_irqsave(&c->lock, flags); - } - spin_unlock_irqrestore(&c->lock, flags); -} - -static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m) -{ - struct spi_master *master = spi->master; - struct txx9spi *c = spi_master_get_devdata(master); - struct spi_transfer *t; - unsigned long flags; - - m->actual_length = 0; - - /* check each transfer's parameters */ - list_for_each_entry(t, &m->transfers, transfer_list) { - if (!t->tx_buf && !t->rx_buf && t->len) - return -EINVAL; - } - - spin_lock_irqsave(&c->lock, flags); - list_add_tail(&m->queue, &c->queue); - schedule_work(&c->work); - spin_unlock_irqrestore(&c->lock, flags); - - return 0; -} - -/* - * Chip select uses GPIO only, further the driver is using the chip select - * numer (from the device tree "reg" property, and this can only come from - * device tree since this i MIPS and there is no way to pass platform data) as - * the GPIO number. As the platform has only one GPIO controller (the txx9 GPIO - * chip) it is thus using the chip select number as an offset into that chip. - * This chip has a maximum of 16 GPIOs 0..15 and this is what all platforms - * register. - * - * We modernized this behaviour by explicitly converting that offset to an - * offset on the GPIO chip using a GPIO descriptor machine table of the same - * size as the txx9 GPIO chip with a 1-to-1 mapping of chip select to GPIO - * offset. - * - * This is admittedly a hack, but it is countering the hack of using "reg" to - * contain a GPIO offset when it should be using "cs-gpios" as the SPI bindings - * state. - */ -static struct gpiod_lookup_table txx9spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP_IDX("TXx9", 0, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 1, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 2, "cs", 2, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 3, "cs", 3, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 4, "cs", 4, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 5, "cs", 5, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 6, "cs", 6, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 7, "cs", 7, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 8, "cs", 8, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 9, "cs", 9, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 10, "cs", 10, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 11, "cs", 11, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 12, "cs", 12, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 13, "cs", 13, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 14, "cs", 14, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("TXx9", 15, "cs", 15, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static int txx9spi_probe(struct platform_device *dev) -{ - struct spi_master *master; - struct txx9spi *c; - struct resource *res; - int ret = -ENODEV; - u32 mcr; - int irq; - - master = spi_alloc_master(&dev->dev, sizeof(*c)); - if (!master) - return ret; - c = spi_master_get_devdata(master); - platform_set_drvdata(dev, master); - - INIT_WORK(&c->work, txx9spi_work); - spin_lock_init(&c->lock); - INIT_LIST_HEAD(&c->queue); - init_waitqueue_head(&c->waitq); - - c->clk = devm_clk_get(&dev->dev, "spi-baseclk"); - if (IS_ERR(c->clk)) { - ret = PTR_ERR(c->clk); - c->clk = NULL; - goto exit; - } - ret = clk_prepare_enable(c->clk); - if (ret) { - c->clk = NULL; - goto exit; - } - c->baseclk = clk_get_rate(c->clk); - master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); - master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - c->membase = devm_ioremap_resource(&dev->dev, res); - if (IS_ERR(c->membase)) - goto exit_busy; - - /* enter config mode */ - mcr = txx9spi_rd(c, TXx9_SPMCR); - mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR); - txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); - - irq = platform_get_irq(dev, 0); - if (irq < 0) - goto exit_busy; - ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0, - "spi_txx9", c); - if (ret) - goto exit; - - c->last_chipselect = NULL; - - dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n", - (unsigned long long)res->start, irq, - (c->baseclk + 500000) / 1000000); - - gpiod_add_lookup_table(&txx9spi_cs_gpio_table); - - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; - - master->bus_num = dev->id; - master->setup = txx9spi_setup; - master->transfer = txx9spi_transfer; - master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */ - master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); - master->use_gpio_descriptors = true; - - ret = devm_spi_register_master(&dev->dev, master); - if (ret) - goto exit; - return 0; -exit_busy: - ret = -EBUSY; -exit: - clk_disable_unprepare(c->clk); - spi_master_put(master); - return ret; -} - -static int txx9spi_remove(struct platform_device *dev) -{ - struct spi_master *master = platform_get_drvdata(dev); - struct txx9spi *c = spi_master_get_devdata(master); - - flush_work(&c->work); - clk_disable_unprepare(c->clk); - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_txx9"); - -static struct platform_driver txx9spi_driver = { - .probe = txx9spi_probe, - .remove = txx9spi_remove, - .driver = { - .name = "spi_txx9", - }, -}; - -static int __init txx9spi_init(void) -{ - return platform_driver_register(&txx9spi_driver); -} -subsys_initcall(txx9spi_init); - -static void __exit txx9spi_exit(void) -{ - platform_driver_unregister(&txx9spi_driver); -} -module_exit(txx9spi_exit); - -MODULE_DESCRIPTION("TXx9 SPI Driver"); -MODULE_LICENSE("GPL");