| Message ID | 20210217143436.74209-1-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [alsa-ucm-conf,1/2] codecs/rt5672: Move +12dB input boost from 'STO1 ADC Boost Gain' to 'ADC Capture Volume' | expand |
Hi, On 2/17/21 3:34 PM, Hans de Goede wrote: > Both the 'STO1 ADC Boost Gain' and the 'ADC Capture Volume' controls are > digital and the 'ADC Capture Volume' control goes up to +30dB. > > When adding hw-volume-control support adding the +12dB boost gain on to of > the max +30dB of 'ADC Capture Volume' is a bit too much. > > So move the +12dB from the 'STO1 ADC Boost Gain' control to the > 'ADC Capture Volume' control. > > This way we keep the same setting for userspace which does not support > hw-volume-control, while getting a better range when we start using > 'ADC Capture Volume' as hw-volume-control. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Ping? This series seems to have fallen through the cracks, AFAIK there is nothing blocking this series from getting merged. If you want a resend let me know and I'll resubmit. Regards, Hans > --- > ucm2/codecs/rt5672/EnableSeq.conf | 13 ++++++------- > 1 file changed, 6 insertions(+), 7 deletions(-) > > diff --git a/ucm2/codecs/rt5672/EnableSeq.conf b/ucm2/codecs/rt5672/EnableSeq.conf > index ddfb1c7..e373275 100644 > --- a/ucm2/codecs/rt5672/EnableSeq.conf > +++ b/ucm2/codecs/rt5672/EnableSeq.conf > @@ -26,14 +26,13 @@ EnableSequence [ > # cset "name='LOUT MIX OUTMIX L Switch' on" > # cset "name='LOUT MIX OUTMIX R Switch' on" > > - # 47=0dB, 0.375 dB/step > - cset "name='ADC Capture Volume' 47" > + # Both the DMICs and the headset mic (even with the 20dB boost below) > + # are quite soft, set the default capture volume to +12dB > + # 47=0dB, 0.375dB/step, 79=+12dB > + cset "name='ADC Capture Volume' 79" > cset "name='ADC Capture Switch' on" > - > - # Both the DMICs and the headset mic (even with the 20 dB boost below) > - # are quite soft, set the ADC Boost gain (range 0-3) to 1 = 12 dB the > - # next step is 24 dB which is a bit too much > - cset "name='STO1 ADC Boost Gain Volume' 1" > + # 0=0dB > + cset "name='STO1 ADC Boost Gain Volume' 0" > > # Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first > # available boost step >
Dne 13. 03. 21 v 16:47 Hans de Goede napsal(a): > Hi, > > On 2/17/21 3:34 PM, Hans de Goede wrote: >> Both the 'STO1 ADC Boost Gain' and the 'ADC Capture Volume' controls are >> digital and the 'ADC Capture Volume' control goes up to +30dB. >> >> When adding hw-volume-control support adding the +12dB boost gain on to of >> the max +30dB of 'ADC Capture Volume' is a bit too much. >> >> So move the +12dB from the 'STO1 ADC Boost Gain' control to the >> 'ADC Capture Volume' control. >> >> This way we keep the same setting for userspace which does not support >> hw-volume-control, while getting a better range when we start using >> 'ADC Capture Volume' as hw-volume-control. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > Ping? This series seems to have fallen through the cracks, AFAIK > there is nothing blocking this series from getting merged. Yep, it was somehow lost on my side. It's merged now. Thank you. Jaroslav
diff --git a/ucm2/codecs/rt5672/EnableSeq.conf b/ucm2/codecs/rt5672/EnableSeq.conf index ddfb1c7..e373275 100644 --- a/ucm2/codecs/rt5672/EnableSeq.conf +++ b/ucm2/codecs/rt5672/EnableSeq.conf @@ -26,14 +26,13 @@ EnableSequence [ # cset "name='LOUT MIX OUTMIX L Switch' on" # cset "name='LOUT MIX OUTMIX R Switch' on" - # 47=0dB, 0.375 dB/step - cset "name='ADC Capture Volume' 47" + # Both the DMICs and the headset mic (even with the 20dB boost below) + # are quite soft, set the default capture volume to +12dB + # 47=0dB, 0.375dB/step, 79=+12dB + cset "name='ADC Capture Volume' 79" cset "name='ADC Capture Switch' on" - - # Both the DMICs and the headset mic (even with the 20 dB boost below) - # are quite soft, set the ADC Boost gain (range 0-3) to 1 = 12 dB the - # next step is 24 dB which is a bit too much - cset "name='STO1 ADC Boost Gain Volume' 1" + # 0=0dB + cset "name='STO1 ADC Boost Gain Volume' 0" # Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first # available boost step
Both the 'STO1 ADC Boost Gain' and the 'ADC Capture Volume' controls are digital and the 'ADC Capture Volume' control goes up to +30dB. When adding hw-volume-control support adding the +12dB boost gain on to of the max +30dB of 'ADC Capture Volume' is a bit too much. So move the +12dB from the 'STO1 ADC Boost Gain' control to the 'ADC Capture Volume' control. This way we keep the same setting for userspace which does not support hw-volume-control, while getting a better range when we start using 'ADC Capture Volume' as hw-volume-control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- ucm2/codecs/rt5672/EnableSeq.conf | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)